r/aerodynamics • • Sep 23 '26

Tools/Resources AeroLab: A free browser-based airfoil analysis and virtual wind tunnel

4 Upvotes

I’ve been working on AeroLab, a free browser-based airfoil analysis tool that I’ve been developing independently, and it’s now live.

The original motivation was pretty simple: I kept running into airfoil coordinate files that looked perfectly reasonable to a human but caused XFOIL to fail because of formatting, ordering, duplicate points, coordinate conventions, etc.

So I built AeroLab around a preprocessing pipeline that automatically detects and repairs these issues before passing the geometry to XFOIL.

Some of the capabilities currently built into it:

  • Automated airfoil coordinate parsing and preprocessing
  • Selig / Lednicer format handling
  • Duplicate leading-edge point detection
  • Coordinate ordering / winding correction
  • Invalid-coordinate and formatting cleanup
  • XFOIL viscous and inviscid analysis
  • Reynolds number and Ncrit configuration
  • Angle-of-attack analysis and sweeps
  • Boundary-layer data export
  • Interactive airfoil comparison
  • Pressure coefficient and aerodynamic coefficient plots
  • Real-time GPU-accelerated D2Q9 Lattice Boltzmann Method (LBM) virtual wind tunnel
  • Interactive velocity, pressure and vorticity visualization
  • Stall/flow visualization
  • PNG and data export

One of the things I particularly wanted was to make the whole workflow accessible without requiring users to install XFOIL or set up a local analysis environment.

I also benchmarked the preprocessing pipeline on 1,000 real-world airfoil coordinate files. At Re = 200,000 and α = 5°, the raw files had an XFOIL convergence rate of 22.5%, compared with 85.7% after preprocessing, with 633 additional files successfully analyzed.

The LBM wind tunnel is a separate part of the project. It isn't intended to replace CFD but meant to provide a lightweight, interactive way to visualize flow behavior around an airfoil while still being useful for teaching and preliminary exploration.

AeroLab is completely free and browser-based, so there’s no installation or paid software license required.

I’m still actively developing it, and I'm particularly interested in feedback from people who use XFOIL, airfoil tools, or aerodynamic analysis in research/teaching.

AeroLab: http://aerolab-app.onrender.com/

Would love to hear what you think!


r/aerodynamics • • Oct 04 '26

Who are you?

2 Upvotes

Hello all,
After many years of not being very active in the subreddit, I would like now to bring something new and grow the community. First, I would like to get to know you more. So take a vote and if you feel like write something about you in the comment section. Cheers Aeros!

144 votes, Oct 11 '26
29 Engineer in Aerodynamics
38 Engineer in other disciplines
37 University student or researcher
10 High school student
30 Aerodynamics Enthusiast

r/aerodynamics • • 7h ago

Where could i find a free windtunnel simulator for aircraft? more specifically drones & model airplanes?

3 Upvotes

Also if there are any decent airfoil apps anyone could recomend it would be greatly appreciated, thanks!


r/aerodynamics • • 6h ago

hi guys, need some help in starccm

Thumbnail
0 Upvotes

r/aerodynamics • • 12h ago

The theoretical interactions of a mathematically perfect Cone used as a projectile at hypersonic speeds (over Mach 5)

0 Upvotes

I recently had the question of how a mathematically perfect cone would interact with being fired at supersonic speeds. If it is assumed that with a near zero-radius tip (infinitly approaching the ideal) the cone causes infinite pressure to penetrate any obstacle and that the cone is made from an indestructible material so that it doesn't deform from the infinite stress and that with a perfectly smooth lateral surface a minimum of friction is formed, will shockwaves and superheated plasma still be formed, and is there anything I overlooked?

I am not an expert, and most of this is pure speculation. I just was inspired by the attack "True Sphere" from the anime Jujutsu Kaisen and wanted some expert opinion.


r/aerodynamics • • 6h ago

The real reason airplane windows are round (people died before we figured it out)

Post image
0 Upvotes

Is it new for you or you were already aware about this


r/aerodynamics • • 1d ago

Im getting Lower lift as compared to paper how to fix this ?

Thumbnail gallery
2 Upvotes

r/aerodynamics • • 1d ago

Yo i been trying to design an hypersonic jet to go to mach 8 and have an stable cruise at mach 3 any advice

Post image
0 Upvotes

r/aerodynamics • • 2d ago

Towards accurate aerodynamics models for wing icing

Thumbnail
youtu.be
2 Upvotes

r/aerodynamics • • 4d ago

Alguna idea de tema para ensayo sobre aviación y física a la vez?

Thumbnail
1 Upvotes

r/aerodynamics • • 4d ago

which phy project is best for my school's science fair

0 Upvotes

Design and Development of an Intelligent Aircraft Wing Anti-Icing System: Automated Temperature Regulation and Statistical Analysis of Energy Efficiency
Your system will:

  1. Measure the wing's temperature.
  2. Detect when the temperature falls below a set value.
  3. Automatically switch on a small heating element.
  4. Switch the heating off when the target temperature is reached.
  5. Record temperature and energy consumption.

automatic wind-tunnel testing machine for aircraft wing
aircraft testing machine that:

  1. Generates airflow using a fan to simulate wind around an aircraft wing.
  2. Automatically changes the wing's angle using an Arduino-controlled servo motor.
  3. Visualises airflow using tiny threads attached to the wing.
  4. Measures airflow speed before and behind the wing.
  5. Collects experimental data to investigate how changing the wing's angle affects airflow and the onset of aerodynamic stall.
  6. Uses statistics to analyse results through averages, graphs and standard deviation.

which one of these is good for my schools science fair and wud give me a chance of winning


r/aerodynamics • • 5d ago

A real-time 3D wind tunnel for cars on a phone (lattice Boltzmann, for fun, not engineering CFD)

Thumbnail
1 Upvotes

r/aerodynamics • • 6d ago

Tools/Resources PyAero + PyAeroFlow: open-source airfoil mesher and 2D RANS solver in JAX (MIT)

Thumbnail reddit.com
1 Upvotes

r/aerodynamics • • 6d ago

Frisbee-like lift for drones?

Thumbnail
1 Upvotes

r/aerodynamics • • 6d ago

Planes and Flight, up and down?

Thumbnail
0 Upvotes
  1. ⁠When you get to a certain altitude would you need to (or perceive visual cues) stick forward 1-2 Deg to follow the curvature of earth and maintain altitude?
  2. ⁠Wings produce lift, in normal level flight, the lift is created and you will rise away from ground. If I invert my plane, will that result in the lift generated to push me toward earth,, adding to gravity. If not (pretty sure it’s not) but why not?

r/aerodynamics • • 6d ago

Question Anyone with knowhow on how wind behaves against an apartment building, that can give some insight?

2 Upvotes

I'm about to install an air condition unit for heating during winter and am clueless about the aerodynamics of wind against apartment blocks. Any help would be appreciated. I have an apartment on 4th floor and I don't have a dedicated drain I can use for the condensation from the compressor unit, so I need to stick a pipe out of the railing in my balcony, the balcony is also glassed in so wind doesn't go through it.

My apartment is pointing straight East. In my region, during winter the wind mainly blows from west and North/north east. I should already be shielded from west wind.

I need some help considering the optimal placing to minimize the condensation water hitting against the wall or neighbours below.

I've added an image of the general shape of my apartment, I'm considering placing the condensation pipe at point B. Anyone has any idea how wind from North, or North East behaves against this building? I assume wind from North/North-North-East will not be a problem. It might slightly shear, but then roll along the wall.

For North-East wind I'm not sure how it will behave. The wind will hit the building at a 45 degree angle, and shear on the corner. Will the shearing wind roll along the wall mainly with a force parallel to the wall? And will this wind shear protect against north east wind so the water dropping from point B only moves sideways? Or will point B and point C still get hit by North-East wind with an oblique force vector?

Right now I'm considering point B or C. I'm considering point B assuming the wind that rolls against the wall will "shoot out" the droplets a little.


r/aerodynamics • • 7d ago

Question Where to start with John D. Anderson / CFD books

11 Upvotes

Hi, I'm interested in learning more aerodynamics from an interest in motorsport and car design perspective (mostly as a hobby, I don't think I have the right credentials to get a job in motorsport). I have a little bit of experiance with fluid dynamics from my physics degree but not much.

I was interested in his Computational Fluid Dynamics book but wondered if I would be better off reading Intro to Flight or Fundamentals of Aerodynamics first?

Are there any better or follow up CFD book out there you would reccomend after this as well?

Thanks!


r/aerodynamics • • 7d ago

Research Anyone have experience with Ansys FENSAP-ICE? Looking for the best ways to learn it

1 Upvotes

I'm now looking to learn FENSAP-ICE for in-flight icing simulation, including droplet impingement, ice accretion and ideally ice crystal icing.
Has anyone here used it, either in academia or industry? I'd love advice on:

Learning resources: tutorials, courses, books or papers that helped you get up to speed

Validation: good benchmark cases or experimental data

Anything you wish you'd known when starting out
Thanks in advance!


r/aerodynamics • • 9d ago

The engineering behind winglets

Post image
12 Upvotes

Hey everyone! Thought you might find this video on the engineering behind winglets interesting. I made it for the Royal Aeronautical Society's AeroTube 2026 competition.✈️

https://youtu.be/DBSMB67WUAo?si=15OzubEakLAe1wyr


r/aerodynamics • • 9d ago

Independent neutral-point / CG check for an unconventional 600 mm flying wing — VSPAERO predicts the neutral point at only 81 mm. Is this plausible?

Post image
5 Upvotes

Hi! I built this unconventional 600 mm flying-wing RC aircraft, but I am getting surprisingly forward neutral-point estimates.

VSPAERO predicts the neutral point at approximately 81 mm behind the root leading edge, while an independent AeroSandbox VLM calculation gives approximately 92 mm. My physically achievable CG is around 120–130 mm, which both simulations predict to be longitudinally unstable.

Main data:

  • 600 mm developed wingspan
  • approximately 0.101 m² wing area
  • NACA 0012 sections
  • approximately 545 g flying mass
  • four chord stations per half-wing
  • unusual combination of positive and negative leading-edge sweep
  • twist and dihedral vary between panels

The VSPAERO result was checked at four mesh densities, and the calculated neutral point converged from 77.5 mm to 81.0 mm. Nevertheless, the result still seems unexpectedly far forward considering the planform.

Would anyone be willing to independently estimate the neutral point and recommend a safe first-flight CG using AVL, XFLR5, CFD or another method?

I can provide the exact geometry, STEP file and OpenVSP model if someone is interested. I will not attempt a powered flight until this is better understood.

Although the planform looks unusual, it was generated through parametric optimization and evaluated in OpenVSP/VSPAERO at multiple angles of attack, airspeeds and directional perturbations. The unresolved question is whether the predicted neutral point and required CG are correct.

The red point shows the neutral-point location predicted by VSPAERO, approximately 81 mm behind the root leading edge. Its unexpectedly forward position is what I would like to verify independently.


r/aerodynamics • • 11d ago

Research I put the Nacelle on a much needed diet

Thumbnail gallery
8 Upvotes

r/aerodynamics • • 11d ago

Tools/Resources Don't Trust "Free" Data On NASA Airfoils For Drone Endurance

Post image
0 Upvotes

r/aerodynamics • • 11d ago

Question Any suggestions for someone who is doing masters in Aerodynamics without work experience?

3 Upvotes

I started my masters this September, and i feel like i should be using this opportunity to its fullest but the course is only a year long with a lot to be done. From brushing up fundamentals to keeping up with the courses and applying for jobs. I want to know how should I keep my trajectory right now so that it helps me build something concrete for jobs.


r/aerodynamics • • 12d ago

Question Mechatronics student interested in doing my bachelor's thesis on fighter aircraft technology – need some advice

Thumbnail
2 Upvotes

r/aerodynamics • • 13d ago

Undergraduate Research on the 3D Navier–Stokes Equations: Exploring Vorticity and Lean 4 Formalization

Post image
0 Upvotes