Hey everyone!
I recently ran into an issue with my old DualShock 4 where the R2 trigger wouldn't register a full press anymore. Even when fully pressed, it only reached a fraction of its maximum input.
Since the controller was otherwise working fine, I wanted to see if I could fix the problem through software rather than replacing the controller or its components.
After some experimentation, I managed to get it working using a modified version of the GoldHEN GamePad Helper plugin.
I decided to turn it into a small open-source project and share it in case anyone else is dealing with the same problem.
What it does:
- Independently scales L2 and R2 analog inputs so that a worn-out trigger can reach 100%.
- Lets you configure the maximum input value for each trigger.
- Supports adjustable digital activation thresholds.
- Doesn't modify the controller's firmware or permanent calibration.
- Can be enabled per game through GoldHEN.
For example, if your R2 only reaches 102 out of 255, you can configure that as its maximum, and the plugin will scale it to the full range.
I've compiled and tested it on actual PS4 hardware, although compatibility may vary between games.
GitHub (source code, compiled plugin, and installation instructions):
https://github.com/ShamsAli-fathi/DS4-TriggerFix
The project builds on the original GoldHEN GamePad Helper, with additional trigger-scaling functionality.
Hopefully this helps someone keep their old controller working a little longer!
Feedback and testing reports are welcome, especially from people experiencing similar issues with either trigger.