r/MVaveFM1 • • 8d ago

Firmware ⚠️ Note: FM‑1 Third-Party Firmware Flash Compatibility Notice

111 Upvotes

FM-1 Third-Party Firmware Flash Compatibility

Different production batches of the FM-1 use different models of Flash storage chips. Two chip identification codes have been confirmed so far:

  • 0x856014: Older Flash
  • 0xB36014: Newer Flash

Users can check their device's identification code via the community tool M-Flasher, under Device Info → Flash Chip.

Tool download and instructions: https://github.com/jvitkauskas/m-flasher/releases/tag/v0.10.0

Important Compatibility Notes

Some earlier third-party firmwares have not yet been adapted for the newer Flash chip. After installation, the device may boot, operate, and produce sound normally — but users may encounter save failures, saved content being lost after a full power cycle, or inability to change firmware through the normal upgrade process.

A successful flash, normal boot, or "SAVED" display does not, by itself, confirm full compatibility.

Before Installing Third-Party Firmware

  • Back up your device data.
  • Choose a firmware version whose author explicitly states support for your Flash chip.
  • The "Saves on newer FM-1s" filter on The Firmware Hub can help with screening, but this option does not modify the firmware or automatically add compatibility patches, nor does it represent official full testing or certification.

Compatibility Must Be Implemented by the Firmware Itself

Compatibility is determined by the third-party firmware that is ultimately running on the device. Flashing official V15 or V16 first, or changing the flashing tool, will not automatically make an incompatible older firmware work on a newer Flash chip afterwards.

For Third-Party Developers

Please check:

  • Chip identification logic
  • Flash read/write operations
  • Save/load functionality
  • Upgrade components

Add support for the newer Flash while retaining support for the older one. Before releasing a compatible version, please complete the following tests on both Flash types:

  1. Installation and boot
  2. Save data readback after a full power cycle
  3. Subsequent upgrade operations

If You Encounter Save or Upgrade Issues

Please record the following and contact the firmware author or official support to determine the appropriate resolution:

  • Flash ID
  • Firmware name and version
  • On-screen messages / prompts

A failed upgrade does not mean permanent damage. The recovery method depends on the device's current boot and USB connection status.


r/MVaveFM1 • • 23d ago

SMK37 OPEN:eight-track, multi-engine firmware for SMK-37 Pro / Elite, with a browser workbench and SDK

65 Upvotes

Hi everyone, we're M-VAVE. We've released SMK37 OPEN V01 for SMK-37 Pro and SMK-37 Elite, with tools for sequencing, live playing and developer extensions.

Here's what it offers:

  • Eight tracks, six engines: DX7 FM, 303, 808, PSG, plucked string and sampler, with 16–64-step sequences, arpeggiators, chords, parameter locks, effects and 16 project slots.
  • Independent DX7 library: 128 presets across four banks, with standard single-voice and 32-voice bank SysEx import/export. Extension parameters are not handled.
  • PROJECT / LIVE / OFF track modes: combine sequencing with live playing. LIVE tracks keep sounds and held notes across project changes without recording notes. Export LIVE timbre edits separately, or save DX7 voices to the library.
  • Independent keyboard and Pad assignments: four faders control eight tracks in two banks, with pickup to reduce level jumps. Pads send channel aftertouch, which DX7 responds to with vibrato.
  • Performance and connectivity: step and real-time recording, 30–300 BPM, tap tempo and synchronized delay; USB/BLE MIDI input and DIN/USB/BLE MIDI output. Pro and Elite have no DIN MIDI input.
  • Browser workbench: browser playback, firmware updates, and project, sample and voice management. Browser edits must be written to the device explicitly; the browser does not send performance MIDI to external devices.

Application and web source, build scripts and a matching native binary SDK are available. Application and web application sources use GPLv3 with an SDK linking exception; the SDK and other components retain their separate terms. We welcome feedback, feature discussions, and code or documentation contributions.

Choose the correct Pro/Elite model and back up projects, voices and samples separately before flashing. The workbench includes factory V16 restoration for the matching model; switching firmware does not make data formats interchangeable. Eight sample slots share about 19.55 seconds of new storage, and projects do not include sample audio. Flashing can cause data loss or prevent startup; keep power and USB connected.

Thanks to Vikram Rojo for the per-track tuning contribution, and to the upstream projects and community for their support.

Workbench and development kit · Source and README · Issues and suggestions


r/MVaveFM1 • • 53m ago

Sneak peek too the new stuff im working on JIANT/B1T3

Thumbnail
youtu.be
• Upvotes

r/MVaveFM1 • • 1h ago

Question Skiff song arranger

• Upvotes

I've been trying to put a song together in Skiff for several days now.

I fully understand how the song tab works and I know what all the buttons do, I just cannot get my head around how to actually arrange tracks/patterns/rests/etc in a coherent way that does what I want it to.

I've scoured the internet for a decent tutorial that shows the general plan of action but come up with nothing. I get it, this is all very new and people haven't put out that kinda content yet.

Can any one of you lovely people shed some light on your kinda 'gameplan' when piecing a song together in Skiff?

TIA


r/MVaveFM1 • • 2h ago

MIDI Hub for multiple FM1s

6 Upvotes

I dont represent CME but this: https://www.cme-pro.com/product/h12midi-pro/ looks like a neat way to network some FM1s together via USB MIDI and it solves the MIDI out issue as well. I have one on order and will report back..


r/MVaveFM1 • • 6h ago

Wednesday FM1 firmware round up

10 Upvotes

Today's updates: fourteen brand-new firmwares landed overnight, one graduated from the watch list, and more than thirty got updates. Full details at https://fm1-editor.com/firmware/

New

  • ANDROMEDA: Latest 1.8.2-an2-r5
  • cursed os: Latest 0.18.5
  • Dark Funk Durcal Synt: Latest 1.8.2-dfd10
  • DAYV-X: Latest 0.1.1
  • DP3OYB: Latest 1.0.2
  • FM ARCAVE: Latest 0.4
  • KickSide: Beta · Latest 0.10.6
  • MORSE: Latest 0.6
  • OpenLiveSynth: Preview · Latest 0.3.0
  • POND: Latest 0.1.2
  • RudimentSeq: Latest 0.1
  • Ruido: Latest 0.7.1
  • SAMSARA: Latest 1.0.0
  • Textura: Latest 0.2.8

Promoted from the watch list

  • FNTSMG-1: Latest 0.10.1

Updates

  • Blues Box: 1.2 → 1.5.1
  • Caravel: 0.13.0 → 1.0.0
  • DABKE: 0.17 → 0.18 (beta)
  • Drumtonic: 0.2.4 → 0.9.5
  • ECHOFIELD: 0.2.13 → 0.2.15
  • FM-1 Chimera Vocal: 0.7.0 → 0.8.0 (beta)
  • FM-1 Ear Trainer: 0.0.15 → 0.0.16
  • FM-KICK: 0.5.0 → 0.5.1 (beta)
  • FM1 Tonic: 1.0 → 1.6
  • Hookology: 1.0 → 1.1
  • JIANT FM: V10.7.42 → V10.7.52 (in development)
  • K-WASUB: 1.1.03 → 1.2.1b (beta)
  • KARMA: 3.1.4 → 3.1.5
  • KRIECHSTROM: 0.2 → 0.3.1
  • Kris Jangle: 0.12 → 0.14
  • LOAF BREAKER: 0.9.63 → 0.9.68
  • M-vance: 2.6.2 → 2.6.3
  • M-Vsynth2: 1.2.2 → 1.3
  • Matryoshka: 1.18.2 → 1.19.0
  • OpenIFW: 0.4.7-rc12 → 0.4.7-rc15 (release candidate)
  • Penumbra: 1.6 → 1.8
  • Piterfly: 1.2.0 → 1.2.5
  • Plissken: 0.11 → 0.12
  • Quantum GammaWave: 1.3.2 → 1.4.4.1
  • Quartet: 1.3 → 2.0
  • QUARTZ: 0.5 → 0.6
  • Ravel: 1.41.2 → 1.42.0
  • RUPTURE: 1.99 → 2.0.14
  • SIDOU: 1.20.0 → 1.21.0
  • Stallion: 1.0 → 1.1
  • Tessera: 3.6.1 → 3.7

Watch list

  • Watching FM-1 Arcade and h1 (18 Nov)

If there’s any I’ve missed, please raise a GitHub issue.


r/MVaveFM1 • • 1h ago

Firmware M-Vsynth1 - gets sh101 filter

Post image
• Upvotes

Updated to V1.3 and added an sh101 filter. I couldn’t find one anywhere that I could get access to so this has been built and added.

Already on the firmware hub and can be tested online

https://bk40-home.github.io/M-Vsynth2/sim/


r/MVaveFM1 • • 25m ago

Firmware Philosophy

• Upvotes

What is your design philosophy? Do you fill it to the brim with features? Do you focus on a narrow theme or sound? Something else? Would love to hear about what you like and why.

I seem to be gravitating toward the more focused firmware, both in terms of my own designs, as well as the ones I have the most fun playing with. NachtBar is a great example. It does one thing, and it does it well enough that I can pick it up and completely lose track of time...


r/MVaveFM1 • • 15h ago

VNL-1 - A continuous lo-fi backdrop to your day

Thumbnail
youtube.com
29 Upvotes

As a web developer, I'm always looking for distraction-free music as a sonic backdrop. So I combined several of my passions with my newly acquired FM-1 to create VNL-1.

https://samoltz.com/fm1-vnl/

Turn it on a press play for endless songs, each with their own key, chords, and six-part band.

Let it play or shape songs with hands on controls.

Features

  • 40 instrument sets in five flavors
  • 43 chord progressions
  • Four moods
  • Five song layouts
  • 15 themes
  • 10 FX
  • 10 sound engines: a sampler, FM electric piano, FM bass, a wind voice (flute, whistle), an analog-style saw pad, an ensemble for strings and choir, a tonewheel organ, a modeled vibraphone, a chip triangle and the drum synths.
  • Sounds
    • 8 drum kits
    • Four bass
    • Three pianos
    • Three guitars
    • 2 strings
    • 2 winds
    • An organ, mallets, harp, voice and synth pad.
  • Sophisticated accompaniment engine: voice-led chords in 8 rhythms, guitars strummed string by string in eight patterns, and a harp that strums or rolls its chords.

r/MVaveFM1 • • 22h ago

FM-1 Travel Solution

Post image
88 Upvotes

Just gotta find a good cosplay person.


r/MVaveFM1 • • 2h ago

Firmware My FM-1 Multiverse: 21 free browser instruments + 20 firmware packages, with GPL source

2 Upvotes

I’m Matias, the creator of this collection. I’ve been making audiovisual worlds for the FM-1: a pigeon choir, whale codas, a singing frog, a black-cat rock synth, animated ink blots and more.

The catalog shows 25 projects. This release includes 21 browser editions and 20 firmware packages, with corresponding GPL source, contributor credits and SHA-256 hashes. Each card shows its availability. Four current projects are visual previews while matching source is located; the newer C0d3-Ah device package is also held for source matching.

Play / browse: https://matiasg-rgb.github.io/fm1-multiverse/

Source and release notes: https://github.com/matiasg-rgb/fm1-multiverse/releases/tag/collection-v0.2.0

The work builds on Dinghy, Felucca and the wider community platform; full upstream notices are included. Development and documentation have had AI assistance.

I’ve tested the latest builds on my own FM-1. The packaging checks also cover WebAssembly audio/rendering and firmware integrity. Please check your exact hardware and flash-chip compatibility and back up projects/samples before flashing. Browser editions can be explored without changing device firmware. Wider browser, physical MIDI and device-compatibility reports are welcome.

Commercial disclosure: I run the linked storefront and Ko-fi page. The released core is free under GPL-3.0-only, with optional payments or donations. Paying preserves the same GPL rights.

I’d appreciate feedback on which worlds you find useful and any reproducible problems. Please include your OS, browser and device/firmware version. The catalog also links my books and other work for anyone curious about the ideas behind it.


r/MVaveFM1 • • 21h ago

Showcase some dub techno

73 Upvotes

Hopefully I can get that 5-track sloop working soon 🙏🏼


r/MVaveFM1 • • 18h ago

Showcase Mine just came in - first firmware installation was a success!

Post image
32 Upvotes

Just got my FM-1 in and immediately set it up with Coral Flower. Took less than 10 minutes. Love it! Huge for a guy that’s too lazy to learn chords. Can’t believe I was considering a $600 orchid or $250 J-9 at one point lol


r/MVaveFM1 • • 7h ago

AISLING FM-1 synth firmware as a phone app without rewriting any of it

4 Upvotes

AISLING is my open-source firmware for the M-VAVE FM-1 (an Irish ambient take on FartyPants' NACHTFAHRT). It now also runs as a web app you can add to your home screen.

The firmware already had a test build that runs the whole app against a simulated FM-1. I compiled that same C code to WebAssembly with Emscripten and run it in an AudioWorklet (an approach borrowed from Charles Vestal's X0X). The panel is an SVG drawn to the real hardware's measurements. A web manifest and a service worker make it installable and let it work offline.

Two iPhone traps: a phone on silent mutes Web Audio unless you set navigator.audioSession.type = "playback", and the AudioContext must be resumed inside the tap itself.

Tested on an iPhone in Safari and Chrome.

Try it: https://aisling.stephen8n.com/emu/?app

Source (GPL-3): https://github.com/stephencummins/fm1-aisling


r/MVaveFM1 • • 1d ago

Firmware I wasn't sold on SHRUB, I am now

Thumbnail
youtube.com
115 Upvotes

SHRUB is a black hole of wavetable bliss and I'm diving in :::)


r/MVaveFM1 • • 17h ago

The FM1 Is Great For Dawless

21 Upvotes

r/MVaveFM1 • • 21h ago

FM-1 78 free presets for Shrub!

43 Upvotes

Hey all,

Just fyi, If you are using the amazing Shrub and want to have more sounds I have made a new FREE soundbank "ElectroFunk" featuring 78 presets including basses, leads, pads, arpeggios and a lot more. Grab it here: https://skylarkmusic.net/


r/MVaveFM1 • • 21h ago

Wow thank you Donner for huggggeee discount ❤️❤️❤️

Post image
45 Upvotes

r/MVaveFM1 • • 21h ago

Firmware Tessera 3.7 for the FM-1: capture-to-loop

28 Upvotes

Hey, it's me, the guy behind Tessera. Time for yet another update. This is likely going to be the last big one for a while, but please keep the feedback and suggestions coming!

The big new feature in 3.7 is capture-to-loop. Tessera now always listens to what you play. Set a generator's SOURCE to KEYS, play a phrase on the keys (or over MIDI), stop for a bar, and a generator takes it from there: it loops what you played and slowly varies it. Hold REC and it's written into a step pattern, where you can fix a note by hand. The difference between regular recording and capture-to-loop is when you decide. With recording you decide before you play, but with capture you decide after.

Once you've captured a sequence in the step editor, you can use STEP EVOLVE to vary it, or one of the generators can play it as its source, with GRAVITY bringing it back home.

There are also a few new things to find on LANDSCAPE. Give your project a name and have a look. Some of them have a musical meaning too, but I'll let you figure out which. ⛩️

Here's everything that's changed since 3.5.2 (this part written by AI):

Capture-to-loop (3.7)

  • New SOURCE KEYS for TURING, EUCLID, MARKOV and MORPH: Tessera listens to what you play on a track's keys or MIDI IN (up to 16 notes). A bar of silence ends the take, and the generator loops it and varies it, with KEEP and GRAVITY. Play again to replace it.
  • Hold REC to print the take into STEP, fix notes by hand, and the generator carries on from that pattern.

Harmony

  • HARM, a harmoniser: with a CHORD track playing, each step up the scale plays the chord's next note. SCL > QNT HARM for the keys, MIDI IN and generators, and FOLLOW HOW HARM for another track's line.
  • QNT LINK: one QNT for every track, or each track its own (so one track can take MPC pads while others follow the chords).
  • Microtonal scales and Scala tunings now also play with QNT OFF, so a maqam plays on the keys like a piano.

ANSWER

  • BEND, a new ANSWER mode: a tempo-synced delay with a mind of its own, inspired by Qu-Bit’s Data Bender. Repeats drift with VARY and SHIFT, and BREAK makes them glitch.
  • Up to 16 notes a call (was 8), held as long as you held each key, and CHORD TRUE answers chords as chords.

MODS

  • 22 more destinations (STRUM, RATCH, GATE, SWING, GLIDE, GRAVITY, ARP rate/gate/octave and more), listed in groups and starting at the selected track.
  • IN, a new source that’s high while a track is heard and low while it’s muted, soloed out or taken out by ENTRIES (dub throws while the drums are out).
  • Live marks are back on knobs the mods are moving (they went missing in the move to 3.0).
  • Effect destinations are named after the effect’s own knobs (a FILTER’s FX1 CUT and FX1 RES, an ECHO’s FX1 TIM…).
  • LFO SYNC up to 64 bars, so one cycle can last a whole piece.

Playing and form

  • HOLD (GLO + D4): every generator keeps the line it's playing until you let go. Double tap to latch.
  • SECTION PC: when the CHAIN changes section, a track sends a Program Change so outside gear follows the form.
  • ENTRIES works out each track's role (bass, harmony, rhythm) more cleverly, and its FADE now fades MIDI OUT too.
  • ENV + OCT-/OCT+ moves the selected track an octave.
  • A STEP track's GATE and NOTE mod sources follow its pattern.

On the screen

  • LANDSCAPE has grown: every named project has a place of its own, the knobs there play PERF's macros, and there are things to find on its shores. Name a project and go and look.
  • MENU > IDLE LANDSCAPE (goes there after two minutes untouched), TEXT BOLD, NOTE LIGHTS (keys light with the notes).
  • A PIECE's progress in the header, the beat in the PLAY triangle, a countdown under a waiting mute, dotted ROLL seeds while they wait.
  • PRESETS by engine, and VOICE starts with the track's sound.
  • The harmony button is now called SEL, as printed on the FM-1.

Manual, MIDI, simulator, editor, installer

  • The manual and a new Getting started guide are now proper web pages with search, easier on the eyes than GitHub.
  • PPQN setting (24, 48, 4, 8, 12) for clock in and out.
  • SIM CONTROL: the FM-1's knobs, buttons and keys play the web simulator.
  • The editor shows project names on A-D.
  • The installer waits for the FM-1 and names the app holding its MIDI port. Update mode is now called "Tessera Update".

Sound, CPU and space

  • A fairer, earlier voice ceiling: fewer clicks, voices come back faster after an overload, and the quietest tail goes first.
  • TRIO now shares work with the second core, FM6 is faster, and ECHO rests when nothing reaches it.
  • MENU > ABOUT shows free flash and RAM. Several KB of flash freed, with the sound designer removed (saving and loading user sounds still works).
  • FM6 AEG's slow side is usable all the way up.

Fixes

  • The CPU meter on SYSTEM is steady (3.5.3).
  • LFO FADE 0 no longer drops out at a new phrase, the sim no longer double-steps knobs on Windows, ENTRIES ORDER swaps only where a turn stops, and help texts fixed.

Good to know

  • Projects saved on 3.6 or later don't load on 3.5.3 or older, and a project using SOURCE KEYS doesn't load on 3.6.2 or older. Keep a backup if you might go back.

Thanks to everyone who tried the betas and reported issues, and to Thomas Bradley (LEMONADE SANDWICH) for fixes.


r/MVaveFM1 • • 22h ago

Tuesday's firmware update

28 Upvotes

Sooo much is happening: 22 new firmwares landed, from a talking SID groovebox to an orchestra in your pocket, and over 50 got updates. Full details at https://fm1-editor.com/firmware/

New

  • ARP WAV 09: Latest 1.0.5
  • Atl-Atl: Beta · Latest 0.8
  • Beiwagen: Beta · Latest 0.2
  • Blues Box: Latest 1.2
  • CONDUCTOR: Latest 1.0
  • DABKE: Beta · Latest 0.17
  • EVIL GENIUS: Beta · Latest 0.1.4
  • Fernbedienung: Latest 1.0
  • FM-1 Chimera Vocal: Beta · Latest 0.7.0
  • FM-1 Midi-Mania: Beta · Latest 0.9.2
  • FM-KICK: Beta · Latest 0.5.0
  • FM1 Tonic: Latest 1.0
  • FMav-1: Beta · Latest 0.5.1
  • GL!TCH: Latest 2.0.2
  • Hookology: Latest 1.0
  • Juicy: Beta · Latest 0.1
  • M-Vsynth2: Latest 1.2.2
  • Mini-Ju08: Latest 1.00
  • OrGigs: Latest 1.0.2
  • Stack Trace CFW: Latest 1.0.0
  • SY1: Latest 0.4.2
  • TRAPSTATION OS: Latest 1.1.0.2
  • Yehnah: Latest 0.1.0

Promoted from the watch list

  • LSDJ Burrito: Alpha · Latest 0.9.97

Updates

  • Adrift: 0.3.0 → 0.4.0
  • AISLING: 1.4 → 1.4.1
  • Album: 0.1.73 → 0.1.76
  • Amenity: 2.1.0 → 2.1.1
  • AQUORA: 0.7.7 → 0.7.14
  • Araminta: 4.4 → 4.7
  • Arctic Scream: 2.1 → 2.1.1
  • Argo: 1.8.4 → 1.8.5
  • B3 ORGAN: 0.4 → 0.5
  • BAILE: 0.7 → 0.8
  • Bigorna: build 102 → build 106
  • BoopBox: 1.9.4 → 1.9.6
  • CHOPPAH: 1.4 → 1.4.1
  • Compás: 1.1 → 1.2
  • Deep Field: 1.8 → 1.11
  • Demake: 0.4.24 → 0.4.25
  • DUELL: 1.2 → 1.3.1
  • Elixir: 1.4 → 1.4.3
  • FIZZ: 0.12.0 → 0.13.0
  • FM-1 Audio Router: 0.5.0 → 0.6.1
  • FM Lab: 1.3.3 → 1.4.0
  • fm1-dock: 0.8.2 → 0.9.0
  • FMini-1: 2.5.12 → 2.6.0
  • FMLarynx: 0.4.1 → 0.4.2
  • Frodhes: 0.9.11 → 0.9.13
  • GIO-1: 0.3.1-alpha → 0.3.1-beta (beta)
  • Guru-600: 1.2.0 → 1.3.0
  • HADAL-1: 1.0 → 1.0.1
  • HAWK CHUA: 2.1.6 → 2.1.7
  • JIANT FM: V10.7.23 → V10.7.42
  • K-WASUB: 1.1.02 → 1.1.03 (beta)
  • KARMA: 3.1.2 → 3.1.4
  • Kitten Rack: 1.4.0 → 1.5.0
  • Kitten Synths: 2.8-kitten.8 → 2.8-kitten.12 (beta)
  • LOAF BREAKER: 0.9.46 → 0.9.63
  • M-vance: 2.5.1 → 2.6.2
  • Manta: 1.0 → 1.1
  • Matryoshka: 1.15.0 → 1.18.2
  • Mighty Arp: 1.4 → 1.5
  • MONO2K: 1.9.1 → 1.11
  • MT-40X: 0.1.0 → 0.1.2 (alpha)
  • Mutable Dreams: 2.1 → 2.3
  • NCC: 0.6 → 0.7
  • ObsSynth: 0.1.0 → 0.2.0
  • OPLBend Tracker: 0.4 → 0.4.1
  • Penumbra: 1.5 → 1.6
  • Quantum GammaWave: 4.0.0 → 1.3.2
  • QUARTZ: 0.4 → 0.5
  • Rupture: 1.93 → 1.99
  • SIDOU: 1.10.0 → 1.20.0
  • Skiff: 2.6 → 2.7
  • SPAMPY: 1.0 → 1.1
  • Tessera: 3.5.3 → 3.6.1

Watch list

  • Watching AFFINE, Analog Summer, BGIRL FM-1, Capy, Mini-Grain and Vostok (17 Nov)

If there’s any I’ve missed, please raise a GitHub issue.


r/MVaveFM1 • • 8h ago

I bricked it

2 Upvotes

dang, I feel a sadness of a child that has broken his PlayStation controller and suddenly can’t play anymore.

any help available ? I googled and it’s directing me towards Quixotic unbricker tutorial but I’m not super comfortable with python and command lines.


r/MVaveFM1 • • 4h ago

Recommendations?

1 Upvotes

I'm completely new to this topic; my FM-1 is on its way, and I'm testing out different firmware versions on the emulator (my favorites are Felucca and Nachtfahrt ❤️❤️❤️)

I’d like to be able to view and save what I’m doing on the device right on my desktop (Debian). Do you have any recommendations?

Is there a way to easily switch between firmware versions? I’d like to put off buying an FM-1 just for Nachtfahrt for as long as possible 🤣

And do you have any other tips for a complete beginner?


r/MVaveFM1 • • 6h ago

First timer

1 Upvotes

I have the fm-1 m-bootloader(1.2) on my device and I can no longer boot my firmware. I can access m-bootloader. Firmware hub can't seem to detect my device. Any advice would be appreciated.


r/MVaveFM1 • • 21h ago

FM-1 Another Mono2k IDM jam

15 Upvotes

A madness of LFOs and plock as per usual . One great thing is that this firmware doesn’t clip, when it reaches the cpu limit, it fades the heaviest track. So you can keep going musically without harsh clippings (it happens towards the end of the video when the heavy poly track kick in). Love it


r/MVaveFM1 • • 17h ago

How do you get decent sound to output

6 Upvotes

I know this is a cheap device. I love making music with my FM-1 and I have found it’s hard to get a decent sound out (recorded sound from Skiff) and send to GarageBand or another DAW to process. My goal is to make a decent recording to share with friends etc. I have some great songs that I have recorded. My issue is the sound output is not even decent. Any suggestions to get better sound to make a recording. Yes I know there’s limitations and I may be hitting up against it.

Edit: I should say I use almost exclusively Skiff and recorded songs in the groove box. on my FMs so maybe that’s the issue but I do hear some hiss or clipping even in low pass filter or flat - 3 machines. I have run directly using usb, and also have a Scarlett 6i6. Additionally I have hooked up to speakers to play live and that sounds great. Especially running multiple in what seems now like true stereo. My issue now seems to be a clean recording.