r/airsoft • • Mar 05 '22

GUIDE Beginner Guide and other important guides

620 Upvotes

Guide List (links):

Beginner Guide

Different Replica Guide

V2 Gearbox Guide

Hop-up/Bucking Guide

Inner Barrel Guide

BB Weight Guide

Basic Operations Guide

Searchbar Guide

Battery Guide

Hi all, this post will combine a few different guides together and change the current Beginner Guide format, so that the guide can be edited and updated by any member of the mod team; as such, we can have one beginner guide that is constantly kept up-to-date. if you have suggestions, improvements or clarifications that the guide or wiki system could benefit from, please use modmail to contact the moderators about it.

Hope it helps!

- Mods


r/airsoft • • May 02 '23

GUIDE Event alert flyers: a way to let the subreddit know about your event

110 Upvotes

Hi all!

After a not-so-recent poll, we've been developing a set of rules to allow event notifications to be set up. These notifications are posts in the form of "flyers"!

Flyers are essentially an image used to display important information about an event, subject to the new flyer rules.

Hopefully they'll be useful, enjoy!


r/airsoft • • 5h ago

GUN QUESTION Camo idea for my AK

Thumbnail
gallery
101 Upvotes

Hey guys i need your help, i dont know what camo Paint should i put on my ak,

My kit use kahi Gorka with olive Green k6-3, smerch etc,

I had few ideas but none really went anywere,


r/airsoft • • 1h ago

HUMOR Heavy recoil pistol

29 Upvotes

Next time I'm getting a TM...


r/airsoft • • 8h ago

GUN PIC What do we think of my first airsoft gun?

Post image
73 Upvotes

Comes with 2 steel high caps mags, full steel build, the wood parts are polymer faux wood though, a sling which I already put on it, and I also got a full face protection mask with 2 extra steel high cap mags so I can have 3 in my pc (which has real steel plates, non ballistic ones though) and one in the rifle


r/airsoft • • 1h ago

VIDEO Rate my kit

14 Upvotes

I've only been playing for a year; there's a my first milsim coming up in a week, and I'll be putting together something similar to what's in the video for it. Of course, on top of everything else, I'll also be carrying a huge backpack and another medical pouch on my left cummerbund


r/airsoft • • 11h ago

This is your sign to get a cheap 20$ camera and run into the woods

Post image
83 Upvotes

r/airsoft • • 16h ago

Back after 15+ years!

Post image
118 Upvotes

Things have definitely changed since the entire airsoft universe was basically Tokyo Marui, Redwolf and a couple sites that no longer exist. A little too much CoD turned into an itch for real life milsim, so I built my loadout. If anyone’s in North Jersey/NYC, I’m all ears for field recommendations/will see you at Strikezone.


r/airsoft • • 19m ago

GENERAL QUESTION Aeg vs shotgun

Thumbnail
gallery
6 Upvotes

So ive been playing airsoft for about a year now and have been looking to upgrade my primary to something better and more reliable. At the moment I have a golden eagle 870 gas shotgun. I love it but its not reliable and i keep having to fix it.

So im kinda wondering if I should stick with the shotgun loadout and buy a CYMA spring shotgun or get an aeg.

I usually like to play pretty aggressively and like the idea of fire power with an aeg(even though i kinda feel like its cheating). But. Having said that I also like the aggressive play style of the shotgun.

So id like to hear what yall think... these where the two guns I was looking at. I have a budget of around €170 ish

Thank you for reading this and thank you even more for commenting 😁


r/airsoft • • 2h ago

New airsoft field

7 Upvotes

Hey I'm looking to start an airsoft field in the Ohio Michigan area because I love playing and there's not really any fields around. Would I actually be profitable and would anyone actually come.


r/airsoft • • 12h ago

New-ish to airsoft. Rate the kit

Post image
38 Upvotes

r/airsoft • • 40m ago

GENERAL QUESTION Boy is airsoft one hell of a sport, so here's my list so far of some things I own and some things I'm trying to acquire

3 Upvotes

1: my mask which is a v force grill 2.0

2: my plate carrier which is a yakeda plate carrier, cheap but it works

3: gun which I'm trying to acquire: Arcturus SE 10" starter pack it includes a basic smart charger and a 11.1v 2000mah li lon battery

4: gloves: mechanex fast fit gloves

5: lightweight jacket

6: x3 Arcturus 200 round mid cap mags

7: basic speed loader

8: lightweight foam plates for plate carrier

9: basic beanie for head protection

10: hiking boots

11: elite force.25g 4,000 BBs

And that's about it what do you guys think!?


r/airsoft • • 10h ago

S&W M64 2inch

Post image
19 Upvotes

So, what do you think?


r/airsoft • • 48m ago

Need some help

Post image
3 Upvotes

After some extensive internet searching... I seek the knowledge of the wise sages of r/airsoft to help me locate a replacement cheek rest that is actually in stock for my strike industries raider....


r/airsoft • • 11h ago

GUN PIC Refinished the stock on my G&G M1 Garand. Went for dark walnut

18 Upvotes

Hey r/airsoft!

The factory finish on my G&G Garand was okay, but it always looked a bit too "replica" to me. I wanted a deep, dark brown, almost black, that looks like it's been carried across Europe and back, specially for reenactment purposes. So this weekend I gave it a go, and I'm really happy with it.

Quick breakdown for anyone thinking of doing theirs:

Strip it down. I was going to do it fully assembled with masking tape because I'm a klutz and was scared of not getting it back together. I ended up taking it apart and it's SO much easier. Take photos as you go and keep the screws in a tray. Also, it's an AEG, so keep the water-based stain well away from the wiring and connectors.

Sand off the factory lacquer with 120 grit, then 180 to smooth it, always with the grain. Wipe off every bit of dust before staining.

Walnut stain: I used walnut crystals ("nogalina" here in Spain), two teaspoons in a glass of hot water. Brush it on, wait a couple of minutes, then wipe off the excess. Three coats got me the shade I wanted.

Linseed oil to seal it. It darkens it a touch more, makes the grain pop, and gives it a nice satin finish. It also helps protect the wood from mud and rain out on the field.


r/airsoft • • 3h ago

GEAR PIC Parts…….

Post image
4 Upvotes

Got to raid a hpa builders work room. He said come get a some of my extra stuff. I showed & he started cleaning house. Maybe I can build at one gun🤣.


r/airsoft • • 21h ago

Oakleaf and M84 Look Good Together

Thumbnail
gallery
96 Upvotes

r/airsoft • • 10h ago

GENERAL QUESTION MTW stands for Modular Training Weapon, so I made a free 3D builder to try parts on it

9 Upvotes

Hey everyone!

The whole point of the MTW is in the name, Modular Training Weapon. It's built around AR/M4 standards, so you can swap the handguard, stock, grip, muzzle, mag and more. The problem is you never really know how a combo will look before you order the parts.

I'm a young French dev and a big airsoft fan, so I built a little site to try it in 3D.

https://mtw-builder.com/

You click a part of the replica and swap it, it mounts in real time. There are 25 handguards, 16 outer barrels and the three versions (7", 10.3", 14.5"). You can slide optics, lasers, lights and foregrips along the Picatinny and M-LOK rails, change colors and paint patterns, or start from a famous build like the Mk18 Mod 1 or the URG-I. Then you can share your build as a link or as an image with the parts list.

It's totally free, no account, no ads, nothing to sell, and it works on your phone too. Just an unofficial fan project from an MTW owner, I'm not affiliated with Wolverine or any of the brands. It shows how parts look together, so always double check fitment before ordering.

I'd love your feedback. What looks off, what's missing, which parts you'd want next? Drop a comment or use the suggest button on the site.

Thanks!


r/airsoft • • 17h ago

Looking for information on the Double Bell AK Short Mags

Post image
32 Upvotes

I am in the US.

Short AK Mags are a unicorn.

Not many people want them. In the OLD days the Tokyo Marui Beta Spetz had a shorty 250rd high cap that was highly coveted but I need mids.

The Double Bell mags don't appear to be currently being made. I cannot find them in the US or Asia, only Europe and most places that have them listed are out of stock. I have reached out to the 4 retailers I found with them and asked if they will ship to the US. I prefer the modern polymer mags.

I found a post in this sub from like 2 years ago that said these mags were larger than others and wouldn't fit all Airsoft AKs and I get that there's absolutely no standardization but the responses said it fit guns with larger mag wells. If you have these mags can you confirm this size difference? My hope is to use these with an Arcturus AK12 FE U.

If it matters, I want these for a flex. I don't care what you like or you think I should buy. I am looking for these or similar. I am aware people are 3D printing short AK mags and that also doesn't interest me. Anyone have any information on their performance and fit or any sources for them?

Mahalo.


r/airsoft • • 7h ago

Aeg motor sound right ?

5 Upvotes

Adjusted the motor.


r/airsoft • • 1d ago

GEAR PIC Let’s just skip right to WW VI?

Thumbnail
gallery
226 Upvotes

Had an awesome time playing at Ground Zero Airsoft in Connecticut. VFC PPSH ran well on MAPP gas all day in 40f weather.

As soon as VFC announced, they were making a PPSH I knew I had to order one. I wanted to have some kind of semi modern or retro Cold War era kit and since nothing fit the bill I decided I would just make up a reason to be using such an old platform with modern gear.

My thought was in an alternate universe where the Soviet Union didn’t fall, in the late 1990s the Soviet Union was trying to capture and take over power plants across Europe. I was inspired by the US’s solution to our own platform designed to be used in and around delicate equipment, so I thought maybe the Soviets instead of designing their own would simply pull submachineguns out of storage to use.

That way, they could still capture and fight within power plants and high-tech factories without the chance of over penetration, destroying more than was necessary.

Kit list:
- Gearcraft Altyn R2M repro
- Gorka 1 repro jacket
- Custom designed PPSH drum rig “Bober”
- Barvikha (VSR-93) trousers
- Kirza Sapogi boots
- VFC PPSH-41 GBB
- Some generic rubberized Amazon gloves
- Repro RGD-5 grenades from Ali


r/airsoft • • 5h ago

GENERAL QUESTION Difference between MSW and AM

3 Upvotes

I'm looking at attending my first American Milsim in March but I've never been to one of their games. In terms of milsim I've gone to a few MSW games and want to know what to expect in regards to how AM plays. For comparison I view Lion Claws as very low on the milsim scale with MSW being high on the scale. Thanks and any advice is also appreciated.


r/airsoft • • 11h ago

Airsoft fields in Germany

9 Upvotes

Servus,
Im in south Germany, living in Munich but my friends are in Bawü. We don’t really have any good fields, especially CQB, so I was wondering if anyone has any recommendations as I don’t really want to drive from Munich to Frankfurt to our usual field.

Also if anyone in or around Munich area is looking for someone to play with, I’m trying to get active in the field, I haven’t played in over 2 years tho 😭

Thanks in advance


r/airsoft • • 12m ago

GUN QUESTION Cyma 052 Gen 2 Outer Barrel Bending

1 Upvotes

I've decided on buying myself a Cyma RPK, but have heard reports of the outer barrel bending with relative ease due to its aluminium construction.

Does anyone here have experience who can confirm/deny this claim? And if so, how much abuse can the gun take without sustaining damage.

Thanks in advance.


r/airsoft • • 21m ago

SandViper JW4 & GE M870 - Airsoft CQB Gameplay Brothers POV - [H01 & H02] [STG Braga]

Thumbnail
youtu.be
1 Upvotes