r/BudgetAudiophile • • 25d ago

Tech Support Any good budget subwoofers (check body text)

2 Upvotes

I’m looking for a subwoofer for my stereo setup for max $200, I also ideally want it to be a smaller one, say 15 inches or shorter as anything bigger would make it hard to access some records on my shelf. Anyone have suggestions?

r/BudgetAudiophile • • Aug 07 '26

Tech Support Speaker setup

Post image
59 Upvotes

Hello Guys,

I recently bought new KEF Q3 meta speakers. I could buy them for €460 and have 30 days of trial. I also bought a used denon avr x1600h for €150 as i want to work towards a 5.1. I listened to some jazz on the q3’s (with a cambrig amp i think) in the shop and was amazed by how refined and detailed they sound.

However now that that i have them in my home and i just do net get a big wow factor from them. I am not sure that this is due to my speaker placement or that the denon avr is not a good match with these speakers. I placed my speakers 2,4 meters apart on stands without sand. 23cm from the front wall and therefore added the full foambuds to the bass port on the back of the speakers. If i dont the bass gets boomy. I am sitting at 2,8 meters from the speakers. I have them toed in quite strongly (15 degrees) so that they cross 50cm behind my head. I also did the audyssee calibration which sounds way better than direct mode (which sounds very old, flat and joyless). But despite this i have the feeling the sound is not dynamic, high piano notes are agitated/distorted and the bass is a bit boomy. Could you guys give me some advice on my setup or help me determine the aspects that i can change to improve my setup.

Edit: so if anyone is interested. I am trying out a wiim amp ultra and actually almost all issues are solved.

Bass is not boomy anymore and i even took all the plugs out.

Music is more dynamic i can hear instruments i could not hear before.

I can volume harder without having the idea I am agitating either my ears or the speakers.

Piano notes are less agitated but still there. Possibly also a room acoustic problem as i have a lot of bare concrete walls, nog thick curtains and little carpet.

Only thing i cannot change is the distance. sitting 2,8 meters away while the speakers are 2,4 meters apart results in missing the immersive soundstage. Sitting just in front of the couch (0,5meter closer) increases bass notes and immersive soundstage.

Conclusion: I probably return the KEF Q3 speakers they require specific 4 ohm amps and i don’t want to spent so much money on extra gear to run a KEF Q serie as home theatre, while there are probably better alternatives like Dali 6ohm speakers. If anybody has good recommendations on amps that can handle 4 ohm speakers without external amps let me know.

Also I did research on the denon x1700h with kef Q3 serie and everybody says it’s fine. They are not lying its fine but dont buy the x1700h for this speaker you are just wasting a beautifull speaker.

r/BudgetAudiophile • • Aug 27 '26

Tech Support Advice on Speaker Repair?

Post image
20 Upvotes

The speaker come itself appears to be intact but the baffle that connects the rest of the assembly is worn away by time. Can I repair this myself without replacing the entire speaker? I’m pretty handy and can solder the speaker in and out with no trouble.

r/BudgetAudiophile • • Oct 06 '26

Tech Support Fosi BT20A Pro / BT30D Pro: Should I get the 32V or 48V power supply for ELAC DB63 on a desktop?

1 Upvotes

I am setting up a desktop audio system and am feeling a bit stuck trying to decide between the 32V and 48V power supply options for a Fosi amplifier.

Here are the exact details of my setup and how I plan to use it:

  • Amplifier: Looking at either the Fosi Audio BT20A Pro or BT30D Pro.
  • Speakers: ELAC Debut 3.0 DB63 (6 ohms, 87 dB sensitivity).
  • Placement: The speakers will be on 31-inch (80 cm) floor stands placed right next to the left and right sides of my desk.
  • Desk Size: 140 cm x 60 cm.
  • Listening Distance: Around 1 meter (3 feet) when working at the keyboard, and up to 2 meters (6 feet) when leaning back to watch movies.
  • Volume Habits: I will always listen at a comfortable, moderate volume.
  • Usage Control: Once the system is set up, I plan to leave the physical volume knob on the Fosi amp untouched and handle 100% of my daily volume changes digitally through my computer's system volume.
  • 32V Risks: I am worried about lacking dynamic headroom during heavy movie spikes (like explosions). I am also worried the amp might clip and damage the speakers during these spikes, or if a family member accidentally cranks the volume knob.
  • 48V Risks: I am worried the volume knob will be too touchy/sensitive at close range, the amp will run too hot on my desk, and a family member cranking the knob could blast dangerous amounts of raw power at me.

Which power supply is the smarter, safer choice for a 1–2 meter listening distance when managing the volume through a PC mostly?

r/BudgetAudiophile • • Aug 17 '26

Tech Support Have I made a terrible mistake?

2 Upvotes

I am completely new to this realm of equipment, despite having been really picky about how my music will sound. Recently I ordered a pair of Emotiva Airmotiv XB2s as well as as a Fosi Audio BT30D Pro 2.1 Channel Bluetooth Amp. Is this all I really need to get started, or am I missing some crucial piece of the puzzle that will leave me sorely disappointed?

My most recent speakers have been the Edifier S355Db 2.1 set, and I have just been sorely disappointed by their flat sound and poor built in EQ settings. I am hoping for a huge upgrade here, but am nervous I just spent a bunch and may have made a huge mistake... Please advise! Thank you for your time.

r/BudgetAudiophile • • Aug 30 '26

Tech Support Less than $50 and I solved my vibration issues.

Post image
98 Upvotes

My turntable is on the same surface as my speakers. They were causing vibrations. I put silicon pads on speakers and that helped some.

So I saw this somewhere and made one myself.

Worked instantly. $30 butcher block from IKEA and some $20 “isolation” feet. Solved.

Block:
https://applink.ikea.com/tY8M9r9M4w--00233429--us--en

r/BudgetAudiophile • • May 13 '26

Tech Support Hard Passing KEF Q1 Meta Speakers

2 Upvotes

I recently purchased a Fluance RT85 Turntable, Schiit Mani 2 Pre Amp, Yamaha A-S301 Amp, and KEF Q1 Speakers. I’ve heard how fragile the drivers are for the KEF Q1s so I was looking to buy an RSL Speedwoofer 10e to hard pass the speakers. I’m realizing that the A-S301 doesn’t have that option - I’ve been thinking about purchasing the Wiim Ultra to help with that issue, as well as use it for streaming. Would this still be an effective system/worth the hassle? How was the chain work?