r/civilengineering • • 25d ago

Welcome to r/civilengineering

5 Upvotes

r/civilengineering • • 3h ago

Career I would get a good gov job ASAP if I’m under 35

37 Upvotes

I've been through 2 PE acquisitions and both companies went to shit afterward. Healthcare got worse, benefits got cut, bonuses were mediocre, and pay was ok at best. I don't think it's just my two companies either. The whole private side is racing to the bottom on fees, and the people doing the work are the ones who take the hit.

Yes pay is better on the private side no one’s contesting that. But if you’re not an owner or in a leadership role that gap has been narrowing in the past half decade (or at least it has in my area). Theres virtually no pay gap for entry-mid level people and if there is it’s maybe ~10% which is quickly eroded away after you factor in benefits (WHICH ARE DRAMATICALLY BETTER).

Let’s talk about my biggest concern which is AI. I'm not saying engineers get replaced overnight or that nobody needs a PE stamp. My concern is how firms make money. Most of them sell hours, and a big chunk of those hours are junior and mid level people doing markups, calcs, drafting, QC, report writing, and plan review responses. That's exactly the work AI is getting good at, and it's improving fast. We're not in 2023 anymore.

You don't need 100% automation for this to hurt. If a firm can do the same project with two fewer people, someone is going to do it, and Private Equity owned firms will be first because their whole job is squeezing margin. Clients will also start expecting lower fees once they know the work takes less time. Less headcount, lower fees, same race to the bottom, just faster. The entry and mid level folks will feel it first, and that's who I'd be most worried for.

Government is set up very differently. Procurement is slow, civil service rules make layoffs hard, and agencies are cautious about adopting new tools. They'll use AI eventually, but I'd expect it to help clear backlogs and onshore more work, not gut the staff. At least in my area the agencies already run pretty lean theres really not that much to “gut” and the PEs drive the entire operation I can’t see reductions in force that target PEs at government agencies. Nothing is 100% safe, but that's about as insulated as it gets in this field.

The catch is that these slots are limited and the hiring process is tedious (it took me 4 months to get hired and im told that’s normal/fast). It isn't very competitive right now, but I can easily see that changing. If everyone figures this out at the same time, getting in could be nearly impossible for anyone who isn't already inside.

Just my 2 cents, call me an idiot if you want to but this is my cynical take on the industry and what I think the best move is for younger engineers.


r/civilengineering • • 2h ago

Wanted to share reality capture job in manufacturing facility

10 Upvotes

We used LiDAR scanning to create a detailed 3D digital twin of the production floor, capturing equipment, machinery, and the surrounding environment.


r/civilengineering • • 1d ago

Education Structural Integrity.

185 Upvotes

r/civilengineering • • 1d ago

Meme I know this has been posted before, but it truly is the most perfect civil engineering meme and cracks me up every time

Post image
206 Upvotes

r/civilengineering • • 1h ago

Civil Engineering Student with Cerebral Palsy Looking for a Internship in Europe or the USA – Any Advice or Opportunities?

0 Upvotes

Hello everyone,

I'm a civil engineering student from Tunisia, and I'm reaching out because I'm trying to find an opportunity to complete my final-year engineering internship (PFE) abroad.

I want to share a little about my background.

I have cerebral palsy (CP), a condition I've had since birth. It sometimes affects my mouth movements and makes my speech less clear, but it doesn't prevent me from studying, learning, using engineering software or carrying out technical work.

I've always wanted to build a career in civil engineering, and I've continued working towards that goal despite the challenges.

My academic and professional background:

Licence in Civil Engineering – ISTEUB, University of Carthage, Tunisia.

Currently pursuing an Engineering Degree in Civil Engineering at Université Libre de Tunis.

Specialization: Buildings and Special Structures.

Previous professional experience at BEST Conseils.

Technical skills: AutoCAD, Robot Structural Analysis and Tekla Structures.

What I'm looking for:

I'm searching for a 5–6 month final-year engineering internship (PFE), starting in January 2027, preferably in:

Structural Engineering

Building Design

Structural Analysis and Calculation

Civil Engineering Consultancy

My preferred destinations are European countries or the USA.

I'm also open to advice about companies that accept international engineering students, internship programmes, scholarships, or organizations that support students with disabilities.

I know finding an international internship as a Tunisian student isn't easy, especially with visa and administrative requirements. However, I'm willing to make the effort and explore every realistic opportunity.

If you're an engineer, recruiter, company representative, or someone who has experience with international internships or disability inclusion in engineering, I'd really appreciate your advice, contacts, or recommendations.

I'm not looking for sympathy. I'm looking for an opportunity to demonstrate my abilities and develop professionally.

Thank you for taking the time to read my story.


r/civilengineering • • 1h ago

Civil Engineering Student with Cerebral Palsy Looking for a Internship in Europe or the USA – Any Advice or Opportunities?

0 Upvotes

Hello everyone,

I'm a civil engineering student from Tunisia, and I'm reaching out because I'm trying to find an opportunity to complete my final-year engineering internship (PFE) abroad.

I want to share a little about my background.

I have cerebral palsy (CP), a condition I've had since birth. It sometimes affects my mouth movements and makes my speech less clear, but it doesn't prevent me from studying, learning, using engineering software or carrying out technical work.

I've always wanted to build a career in civil engineering, and I've continued working towards that goal despite the challenges.

My academic and professional background:

Licence in Civil Engineering – ISTEUB, University of Carthage, Tunisia.

Currently pursuing an Engineering Degree in Civil Engineering at Université Libre de Tunis.

Specialization: Buildings and Special Structures.

Previous professional experience at BEST Conseils.

Technical skills: AutoCAD, Robot Structural Analysis and Tekla Structures.

What I'm looking for:

I'm searching for a 5–6 month final-year engineering internship (PFE), starting in January 2027, preferably in:

Structural Engineering

Building Design

Structural Analysis and Calculation

Civil Engineering Consultancy

My preferred destinations are European countries or the USA.

I'm also open to advice about companies that accept international engineering students, internship programmes, scholarships, or organizations that support students with disabilities.

I know finding an international internship as a Tunisian student isn't easy, especially with visa and administrative requirements. However, I'm willing to make the effort and explore every realistic opportunity.

If you're an engineer, recruiter, company representative, or someone who has experience with international internships or disability inclusion in engineering, I'd really appreciate your advice, contacts, or recommendations.

I'm not looking for sympathy. I'm looking for an opportunity to demonstrate my abilities and develop professionally.

Thank you for taking the time to read my story.


r/civilengineering • • 18h ago

Question Pipe under drain

Post image
24 Upvotes

What is the point of this under drain on a bridge abutment if the stream elevation is higher than the under drain?


r/civilengineering • • 21h ago

Can’t pass the pe .. what to do

36 Upvotes

I am an average engineer .. 6+ yrs structural engineer … 3 PE attempts


r/civilengineering • • 1d ago

Question What construction site lesson do you wish someone had taught you earlier?

63 Upvotes

I'm a civil engineer and recently started a construction business. There's a big difference between learning how things should work on paper and seeing what actually happens on site lol.

For those of you who've spent years in the field, what was a lesson you learned the hard way that a younger engineer might not see coming? Could be about drawings, contractors, communication, or anything else.

Would love to hear the stories behind them too.


r/civilengineering • • 2h ago

Breaking into Civil Engineering with a Non-Engineering Bachelor’s?

0 Upvotes

I have a bachelor’s in Computer Information Systems and am currently pursuing my master’s in Civil Engineering, graduating in May 2027. My background is in IT, but I’m gaining experience with AutoCAD and engineering-related projects through an internship that’s going to end soon.
I’m struggling to find entry-level civil engineering positions that don’t require an engineering bachelor’s degree.
Has anyone made a similar transition? What job titles should I look for, and would companies consider hiring me while I’m completing my master’s?
Any advice would be appreciated!


r/civilengineering • • 2h ago

Anyone else having issues accessing web soil survey?

1 Upvotes

Getting a 502 bad gateway error when attempting to access the site.


r/civilengineering • • 15h ago

Career Government to Consulting

10 Upvotes

Going from working for the government to a consulting firm.

Advice? Key differences? Any insight?!


r/civilengineering • • 1d ago

Question Why work smarter if we don’t get paid more?

107 Upvotes

Say two engineers do the same job with the same quality, but one gets it done in half the time. If it’s hourly, the company bills fewer hours. If it’s lump sum, the company makes more money.

But what does the faster engineer actually get out of it? More work? (Bro I hate more work!) More monies $$ for him/her?

And if the answer is to use that extra time to move into management, how does that actually work? How do you make that transition when you’re still expected to stay billable?

This is a follow-up to my post yesterday, which was more about the macros. Today I’m more curious about the individual engineer. What’s actually in it for us?


r/civilengineering • • 9h ago

Open CAD Studio Layouts Tutorial: Viewports, Paper Space, Printing & PDF Export

Thumbnail youtu.be
2 Upvotes

r/civilengineering • • 1d ago

Question About how long should it take to repair the Kerch Bridge?

Post image
245 Upvotes

I was curious for an estimate after seeing it hit with a drone and collapsing.


r/civilengineering • • 7h ago

Student project: ranking NYC buildings for facade inspection with public FISP data. Does this match what you see in practice?

Post image
0 Upvotes

I'm a student working on a project using NYC's public facade inspection (FISP) filings. I'm not trying to replace anyone's judgment, and I'd like a reality check from people who do this work.

I used past filings to rank buildings by their chance of an Unsafe rating next cycle. On a held-out cycle, the top 20% of the list caught about 36% of Unsafe buildings, versus 20% for random order and 33% for just using the last rating. So the gain over the simple rule is real but small.

Things that surprised me:
- A random train/test split overstated skill by about 10 points.
- Prediction gets harder each cycle. I suspect the rule that turns unrepaired SWARMP into Unsafe, but I can't see repair status in the data.
- Buildings that never file can't be predicted from building data.

Questions:

  1. How much do ratings vary between inspectors?
  2. Which building features matter most in your experience (material, age, cavity walls, terra cotta, upkeep history)?
  3. How often do SWARMP items get repaired before the next cycle?
  4. Would a ranked list be useful to you?

Data: NYC Open Data, DOB NOW facade filings. Graphs attached.


r/civilengineering • • 16h ago

Electric Power

5 Upvotes

Any transmission line design guys on here? If so, how do you like it?


r/civilengineering • • 7h ago

LEFT BEHIND MATH THEORIES, C.E STUDENT 2nd year

Thumbnail reddit.com
0 Upvotes

r/civilengineering • • 17h ago

WSP second interview

6 Upvotes

Hi all,
I had a one-hour in-person interview with a senior technical manager and a senior principal at WSP in Canada for a structural engineer training role. It covered both technical and behavioural questions.
I've now been invited to a second interview this week, but I don't know who I'll be meeting or what it will focus on.
Has anyone been through WSP's second round? Who did you meet, and was it more technical, behavioural, or about fit and next steps? Any tips would be appreciated.
Thanks!


r/civilengineering • • 1d ago

What other licenses/certificates can we get to benefit our career except for PE?

23 Upvotes

After getting PE, I’m trying to study for something else. Is there any other license for our civil engineers which is good for our career? Such as PMP? TYIA!


r/civilengineering • • 6h ago

Education would you leave business school after one semester to study Civil Engineering instead?

Thumbnail reddit.com
0 Upvotes

r/civilengineering • • 20h ago

AUS (or Victoria) Engineers, how's public sector?

6 Upvotes

Hi fellow Aussies, keen to know your experience working for DTP, DIT, TfNSW etc or any major infrastructure authority.

Have an interview coming up with one of them, I've been in private eng consultancy for 10 years and keen on a change but some first hand experience would be really beneficial.

Thanks


r/civilengineering • • 5h ago

Should i buy macbook m series

0 Upvotes

I am getting it at good cost nearly 70k 80k macbook m2 pro and m3 air series

Will they suppprt civil software like autocad revit and stad pro all?

Is it good to huy it or should i go with windows rtx