r/CrealityCloud • • 1d ago

[Official] Announcement 📢 Schedule Update!

Post image
2 Upvotes

Our FORMNEXT 2026 product launch has been rescheduled!

Please take note of the updated time and location. We look forward to seeing you there!

#Creality #Formnext2026 #3DPrinting #CrealityAIEcosystem


r/CrealityCloud • • 3d ago

[Official] Community Event Weekly Model Find

Post image
3 Upvotes

What’s a model more people should see?

Designed something you’re proud of? Share it.

Found a model you love and want others to try? Recommend it.

Drop a link in the comments and tell us what makes it worth a look.


r/CrealityCloud • • 35m ago

Original Design 🎨 Hinged Easy-Release Seedling Pots

Post image
2 Upvotes

I kept on messing up my seedlings when removing them from the little pots, so I designed the these little pots in Fusion 360 that hinges open to get the seedling with soil out easy. It is a set of four reusable seedling pots designed to make transplanting simple and reduce root disturbance.

Each 50 mm × 50 mm × 50 mm pot is printed in two support-free halves that snap together using an integrated hinge. When the seedling is ready to be planted, the pot opens easily, allowing the soil and root ball to be removed with minimal handling.

There is also a tray that holds the four pots and with raised pot positions that allow excess water to drain underneath and collect in the tray.

And yes, I know there are only four pots. I designed the set this way so it can fit on pretty much any 3D printer, big or small. Just print more if you need them.

For those people with green fingers, is this something you can use?

The free STLs are here: https://www.crealitycloud.com/model-detail/easy-release-seedling-pots


r/CrealityCloud • • 16h ago

Original Design 🎨 360° Rotating Stationery Organizer – A Modular Desk Organizer

17 Upvotes

I've been wanting to design a larger desk organizer that would be both practical and a little more interesting than a collection of regular storage compartments.

I came up with the idea of a rotating organizer that gives you easy access to everything without having to move things around on your desk.

The main feature is its 360° rotating base, which allows you to access all the compartments simply by turning the organizer. I also wanted to make the design modular, so I separated the base from the storage compartments.

This way, the organizer combines a functional rotating mechanism with a customizable storage layout.

A few details about the project:

- 360° rotating mechanism

- Multiple storage compartments

- Modular construction

- Separate base and compartment components

- Cute symbols on outer compartments as well as blank outer compartment version available

- Designed for pens, pencils and other stationery accessories

I spent quite some time working on the proportions and the overall construction to make sure the organizer would be practical while still looking good on a desk.

I think the rotating mechanism makes a real difference here. Instead of reaching around the organizer or moving it, you can simply turn it to find what you need.

I'd love to hear what you think about this concept. Do you prefer traditional desk organizers, or do you find rotating designs more practical?

Commercial access required to download and use this model.

You can find the project here:

https://www.crealitycloud.com/en/model-detail/6a5e7a4c564d60a4bf052d47?cloudPlatform=19


r/CrealityCloud • • 5h ago

Original Design 🎨 Why Buy a Hinge When You Can Print One?

Thumbnail
gallery
2 Upvotes

Sometimes I'm just too busy (or too lazy lol) to go shopping for a simple mechanical hinge, so I thought... why not just print one?

That's how this little design came to life! It's a fully functional mechanical hinge, designed to be durable and ready to use. The best part is that I can print as many as I need, whenever I need them.

And it's ridiculously easy to print! Just lay it flat on the print bed and let it print in place. No assembly, no extra parts, no complicated setup.

The print takes less than 20 minutes and uses only 8.6 grams of filament. Not bad for a fully working hinge, right?

If you find it useful, give it a try

Print Your Own Mechanical Hinge...No Assembly Needed

Download it on Creality Cloud: https://www.crealitycloud.com/model-detail/functional-hinge-3d-printable-easy-to-print?profileId=6acac4fb840c912624241a2e


r/CrealityCloud • • 2h ago

Discussion People: How do you know I do resin printing?

Post image
1 Upvotes

r/CrealityCloud • • 23h ago

Original Design 🎨 I designed a 3D-printed push-to-open click latch mechanism using a pen spring - I’ve already sacrificed every clicky pen in my house for 3D prints, any left in yours?

Thumbnail
gallery
45 Upvotes

I wanted a simple, reliable push-to-open click latch for cabinets, drawers, or enclosure doors without ordering specialized hardware - so I modeled this compact DIY mechanism. It’s a great choice for DIY furniture projects or for upgrading existing furniture.

It uses an ordinary spring from a retractable ballpoint pen and 5 small screws for assembly, giving a crisp, tactile click on every press. All parts print cleanly without complicated supports.

🔗 Free Model Link on Creality Cloud:

https://www.crealitycloud.com/model-detail/push-to-open-click-latch-diy?profileId=6afcbb8e8b6082fb1f20983a


r/CrealityCloud • • 1d ago

Original Design 🎨 Shelf Bracket

Thumbnail
gallery
2 Upvotes

A shelf bracket I modeled because I needed to build shelves above my 3D printing workspace.

I went with a simple yet functional design. Which fits almost anywhere.

They are meant for shelf boards 190 mm wide or more—I used a 230 mm wide board and it looks great.

They are easy to print with no supports needed. I personally printed it from PETG.

It is very durable, and the shelf has a solid load capacity.

The wall screws should be up to 4.5 mm in diameter, and the screws for the board up to 3.5 mm.

Ideally, use pan-head (or truss-head) screws.

If you’d like to print them yourself, I've uploaded the files to Creality Cloud: https://www.crealitycloud.com/model-detail/custom-shelf-support?profileId=69bd527564f6aae1c28af53a


r/CrealityCloud • • 1d ago

Print Showcase 🖨️ Is it too early to start Christmas printing? I made a knitted Santa’s sleigh diorama that glows with an LED tealight

3 Upvotes

I wanted to make a Christmas decoration that feels warm and cosy, like a hand-knitted sweater. So I designed a whole North Pole scene with a knitted texture on every piece. Drop a battery LED tealight inside and the whole diorama lights up with a soft glow.

The scene includes

Santa and his sleigh

A Christmas tree

A snowman

A little elf helper

How it prints

Two ready-to-print profiles included:

Multicolour AMS version: 13 plates, 5 colours

Single-colour version: 15 plates, one colour per plate, so no AMS needed

PLA

The only extra you need is a battery LED tealight

The hardest part was getting the knitted pattern to print cleanly on every piece while leaving room for the light to shine through the scene.

It’s available on Creality Cloud:

https://www.crealitycloud.com/model-detail/santas-sleigh-christmas-diorama-knitted-led-scene

When do you start printing your Christmas decorations? I’d love to see your colour versions!


r/CrealityCloud • • 1d ago

Print Showcase 🖨️ Heatwave Duck — The Duck Who Melts Christmas | Multicolor

Thumbnail
crealitycloud.com
2 Upvotes

r/CrealityCloud • • 1d ago

Original Design 🎨 A little campfire nostalgia for your laundry day! 🔥

Thumbnail
gallery
3 Upvotes

I turned a roasted marshmallow on a stick into a quirky lint roller.

The main technical challenge was designing the internal mechanism so the roller spins smoothly, securely holds the lint roll in place, and can be 3D printed without any supports.

What lint roller design should I tackle next?

Model link:
https://www.crealitycloud.com/model-detail/marshmallow-stick-lint-roller?profileId=6a8735d589206ab021374a6e


r/CrealityCloud • • 1d ago

Discussion 3D Printing Community Needs to Stop Making FDM Pet Toys

Thumbnail
reddit.com
1 Upvotes

r/CrealityCloud • • 2d ago

Original Design 🎨 Fancy Skadis board

Thumbnail
gallery
12 Upvotes

The idea:

Hey everyone. I noticed that a lot of the Skadis boards available to print are all the same. You can print them in different or sizes but they all looked the same. I decided to try something different at add some flair to the board while keeping the functionality of the Skadis board.

The design:

I want to really go nuts with the design and stand out a little with the Skadis board while also keeping this function of the original board. I used the simple diamond design that will really stand out while hung on the wall. Speaking of the wall, I added an offset in the back to easily allow Skadis style hooks to be added with ease.

The print:

Again, here's where the fun begins. You can really go to town on using what color you like and make it really stand out and yours. My print was in PLA but if you want to add some strength, I would use some PETG.

Happy printing!

Grab it for free on Creality Cloud: https://www.crealitycloud.com/model-detail/6afc5a56c1c88e9552c33d6c


r/CrealityCloud • • 1d ago

Original Design 🎨 Fixed my daughter's closet chaos with a 3D printed rotating belt/accessory hanger

Thumbnail
gallery
3 Upvotes

My daughter’s closet was (is) an absolute disaster zone. She is a very girly girl—huge into accessorizing, belts, necklaces, headbands, and all that stuff—which meant her closet looked like a shop exploded into it.

So in an attempt to create some order, I made a belt hanger. But then she couldn’t really get to the ones hanging on the back, so I made it rotatable with a simple 3D printed connector.

It is still going strong in her closet, but I have to admit I often have to remind her to hang her belts on it 😅

One step at a time.

Want to bring order in your closet? Check out the design on Creality => crealitycloud.com/model-detail/rotating-belt-accessory-hanger


r/CrealityCloud • • 1d ago

Original Design 🎨 RIPPLE – Keychain lipbalm holder

2 Upvotes

I wanted to create a small, practical accessory that you could easily carry around every day. Something simple, but with a little twist – quite literally!

That's how the RIPPLE Lip Balm Keychain Holder came to life.

The idea was to combine a compact storage container with a keychain, making it easy to keep your lip balm within reach instead of having to search for it at the bottom of your bag.

The container features a simple thread that keeps it securely closed while still making it easy to open whenever you need it.

A few details about the design:

- Thread opening mechanism

- Keychain attachment

- Two available sizes:

- Small: Ø29 × 80 mm – fits lip balms up to Ø16.5 × 70 mm

- Large: Ø33 × 80 mm – fits lip balms up to Ø20 × 70 mm

I also wanted the design to have a recognizable look, so I used one of my geometric pattern to give the container its distinctive surface.

It's a small project, but I really enjoyed designing this and I am happy that Creality Cloud users like it. It already became a Spotlight Model.

Model is available on Creality Cloud: https://www.crealitycloud.com/en/model-detail/6a8785d289206ab0213b45fe?cloudPlatform=19

What do you think? Would you use something like this, or do you have other ideas for small everyday accessories that I could design?


r/CrealityCloud • • 2d ago

Discussion How often do you actually wash your build plate?

Thumbnail
gallery
5 Upvotes

I always tell myself I’ll wash mine after the next print...

Do you wash yours on a schedule, give it a quick wipe between prints, or wait until the printer starts dropping hints?

Those aren't scratches. They're the scars of a thousand battles.


r/CrealityCloud • • 2d ago

Original Design 🎨 One of my very first 3D modeling designs: a combined TV remote & Xbox controller organizer!

Thumbnail
gallery
3 Upvotes

Hey everyone! 👋

I wanted to share a project from back when I was just starting out with 3D modeling.

Like many of you, my living room coffee table was constantly cluttered with TV remotes and console controllers lying around everywhere. I was looking for a simple, clean, and practical way to keep everything organized in one spot, so I took the leap and designed my own combined remote and controller holder!

Quick update: back in July, following requests from users who needed room for extra remotes, I added a 3-remote version to the files. Also, community members have shared photos showing that it works great not just for Xbox controllers, but for PlayStation and Nintendo Switch controllers as well!

Why it works:

  1. All-in-One Storage: Holds both your console gamepads (Xbox/standard controllers) and TV remotes cleanly on a single compact stand.
  2. Declutters the Living Room: Clears up space on your coffee table or TV stand by making use of vertical storage.
  3. Simple Beginner-Friendly Design: Being one of my early models, it was designed to print easily in one piece without complex assembly.

Print Recommendations:

  • Material: Standard PLA is perfectly fine for this indoor organizer.
  • Settings: 2 to 3 wall loops/perimeters with 15%–20% infill is more than enough to give it good weight and stability for daily use.

The 3D model is completely free to download on Creality Cloud if you're looking to tidy up your setup:

🔗 https://www.crealitycloud.com/fr/model-detail/support-remote-controls-xbox-controllers?profileId=67e168f7ab0cf8df595aba49

It’s always cool to look back at early designs and see how useful 3D printing is right from the start. Let me know what you think ! 🎮📺


r/CrealityCloud • • 2d ago

Original Design 🎨 La Porteña – Locomotora de incienso Retro

Thumbnail
crealitycloud.com
1 Upvotes

🚂 LA PORTEÑA – Retro Steam Locomotive Incense Burner

History comes back to life with the smoke of an authentic steam locomotive!

La Porteña is a historic locomotive reinvented through 3D printing as a collectible piece, retro decoration, and an original incense burner.

Its design combines 19th-century British railway engineering with modern technology, recreating the visual effect of steam through the smoke of an incense cone flowing out of its chimneys.

1856: The birth of a legend.
1857: The beginning of Argentine railway history.
2026: A new life through 3D printing.

🇬🇧 From Hunslet, England, to Argentina

La Porteña was built by E. B. Wilson & Co. at The Railway Foundry in Leeds, in the industrial district of Hunslet, England. According to various historical studies, its construction dates back to 1856.

On August 29, 1857, it led the inaugural journey of the Western Railway between Parque Station and La Floresta, marking the birth of Argentina's railway history.

Its design shares characteristics with British industrial locomotives manufactured by Manning Wardle, a company that acquired drawings and foundry patterns from E. B. Wilson following its closure in 1858.

An ideal tribute for enthusiasts of Hunslet, Manning Wardle, The Railway Foundry, Victorian steam locomotives, and historic railways.

💨 A Locomotive That Comes to Life

Unlike a conventional scale model, this design incorporates an internal incense cone holder, recreating the visual effect of steam from a real locomotive.

Its removable body provides easy access to the holder for replacing incense cones and cleaning. No motors, electronics, or electric smoke generators are required.

The real photographs showcase the 3D-printed prototype and the visual smoke effect achieved.

🕰️ RETRO REVIVAL – The Past Reinvented

Inspired by the Industrial Revolution, its aesthetic combines a riveted boiler, spoked wheels, external connecting rods, chimneys, a historic headlamp, and gold-colored details.

A creation that brings together nostalgia, vintage decoration, steampunk style, classic engineering, and digital manufacturing. Perfect for railway modelers, collectors, incense lovers, 3D printing enthusiasts, and anyone looking for a unique decorative piece.

🛠️ Design Features

  • Modular model with separate, interlocking components.
  • Removable locomotive body and internal incense holder.
  • Four spoked wheels, connecting rods, and external cylinders.
  • Chimneys, headlamp, valves, and historic nameplates.
  • Display track included, complete with rails and sleepers.
  • Can be printed in different colors without an automatic multicolor printing system.
  • Ideal for painting, customization, and weathering techniques.

Assembly: The components fit together and require adhesive for permanent assembly. DO NOT GLUE the locomotive body to the chassis, as it must remain removable.

🖨️ 3D Printing

Designed primarily for FDM 3D printing. For decorative display, the model can be printed in PLA, PLA+, or PETG.

Recommended print settings:

  • Nozzle diameter: 0.4 mm.
  • Layer height: 0.12–0.20 mm.
  • Walls/perimeters: 3–4.
  • Infill: 15–25%.
  • Supports: As required for each component.

📖 Includes English and Spanish Assembly Manuals!

Two professional 10-page PDF manuals, featuring real photographs, exploded views, step-by-step assembly instructions, display track assembly, chassis, wheels, locomotive body, and recommendations for preparation, cleaning, and safety.

A complete building experience, just like a traditional scale model kit!

⚠️ Safety

Using lit incense requires a non-combustible incense holder, properly insulated from the plastic, and prior validation of the entire assembly's thermal resistance. ABS, a coin, a washer, or aluminum foil alone do not guarantee sufficient thermal protection.

Never place burning embers directly on plastic or use open flames. Ensure adequate ventilation, supervise the model during use, and allow it to cool completely before disassembly.

Until thermal validation has been completed, use the model for decorative display only.

🇦🇷 TINO MODELISMO

A locomotive from 1856. A story that began rolling in 1857. A retro creation reinvented for the present.

Print history, build your own locomotive, and relive the age of steam!

Original design by Tino Modelismo – Scale Design & Manufacturing.

🏆 Submitted to the Creality Cloud Retro Revival Design Contest.


r/CrealityCloud • • 2d ago

Original Design 🎨 The spring powered hot air balloon!

Thumbnail
gallery
2 Upvotes

Ready to lift your prints to new heights? Launchable hot air balloon!

Grab the free files here: https://www.crealitycloud.com/model-detail/launch-hot-air-balloon-to-space?profileId=6ad0c21b884bda5c49a933e8

Using the same mechanism as my Vanguard rocket, you can now also launch flying hot air balloons! You can find the mechanism files and build guide here: 

https://www.crealitycloud.com/model-detail/kp3d-project-vanguard-mechanical-motion-launchable-rocket?profileId=6ac38490faee9c1a19668052

I have modified the shaft to look like fire to really set your hot air balloon off!

The balloon itself is designed to be lightweight and prints support-free. Please use PETG for strength. These files are designed for the i8 and K3, so will require many colour changes. If you are worried about waste, you can decrease the details or print single colour!


r/CrealityCloud • • 2d ago

Print Showcase 🖨️ A ghostly little upgrade for your bathroom! 👻

Thumbnail
gallery
6 Upvotes

I designed a wall-mounted razor holder that keeps your razor neatly stored and off the counter, while adding a bit of spookiness to an otherwise boring bathroom.

Would you give this ghost a spot on your bathroom wall?

Get the model: https://www.crealitycloud.com/model-detail/ghost-razor-holder?profileId=6ac67f7af5ed98d3278d9ed0


r/CrealityCloud • • 2d ago

Original Design 🎨 A simple little Corner Bookmark

Post image
5 Upvotes

I designed and 3D printed this corner bookmark to keep your place in a book without needing to fold the page. The design starts as a flat print, with the ribbon added through the hole if you want. The two sides are then folded up and glued together, creating a pocket that fits over the corner of a book page. Just slip it over the corner of the page and you're good to go!

Simple, practical and easy to print. Would you use something like this instead of the traditional bookmark?

I've uploaded the model to Creality Cloud for anyone who would like to give it a try.

Free download: https://www.crealitycloud.com/model-detail/corner-bookmark


r/CrealityCloud • • 2d ago

Original Design 🎨 3D-Printed Sink Strainer — No More Food Scraps Down the Drain!

Thumbnail
gallery
7 Upvotes

Cleaning food scraps out of the kitchen sink is one of those small but annoying tasks that never seems to go away. I wanted to make it a little easier, so I designed this simple strainer basket.

The idea is to have a dedicated place to collect leftover food while letting the water drain through. Once you're done washing dishes or preparing food, you can simply empty the basket into the trash.

I enjoy designing practical household prints like this. They're not particularly exciting, but making everyday chores a little easier is exactly why I love 3D printing.

Creality Cloud -Sink Drain Strainer Basket From fifindr https://www.crealitycloud.com/model-detail/sink-drain-strainer-basket

Would something like this be useful in your kitchen?


r/CrealityCloud • • 3d ago

Original Design 🎨 Haunted Mountain - Backflow Incense Burner

Thumbnail
gallery
7 Upvotes

I've designed this Haunted Mountain Backflow Incense Burner for Halloween, and I must say, it turned out amazing!

The waterfall has 13 slots for the three decorations I've designed. All decorations have the same connectors, so you can put them anywhere you'd like.

You can also create your own custom decorations using the connector I uploaded.

And with two slots for LED candles, it really becomes a beautiful decoration.

You simply print the waterfall base, put two LED tealights into the slots, print and add up to 13 decorations, glue a washer to the top of the mountain so the holes line up, put a Backflow Incense Cone on top of the washer, light it up, and bam!

It was kind of stressful to design because, in the end, it turned out to be more work than I expected, and I had to finish it before Halloween.

But I managed to do so and even won at the Halloween Design Contest on Creality Cloud!

I think this Halloween decoration turned out amazing! What do you think? Let me know! :)

If you want to print it yourself next year, I've uploaded it to Creality Cloud: https://www.crealitycloud.com/en/model-detail/6ae60f95726880555ae6501f?cloudPlatform=19

And I also made a video about it: https://youtube.com/shorts/dS-Zrx8Y88M?si=X6iQhgWPPaF4Nr_H


r/CrealityCloud • • 3d ago

Original Design 🎨 I painted a ripe banana! 🍌

13 Upvotes

This banana paper towel holder was a fun design challenge. It was too tall to fit in a standard 3D printer build volume, so I had to split the model into two parts and design a clean connection between them.

The finishing touch was the custom paint job. I added hand-painted brown speckles around the banana, not just for a realistic ripe look, but also to disguise the seam where the two printed parts meet!

Would you keep this in your kitchen?

Get the model: https://www.crealitycloud.com/model-detail/banana-paper-towel-holder?profileId=6968ef65d1b7a16c7ab43b52