- r/EngineeringStudents - Approach to the College Career
- Approach to the College
- What Major to Choose:
- How do you accurately figure out a job’s demand?
- GPA:
- Community College Versus University Straight Away:
- University Professor Rushing:
- 1st Year:
- 2nd Year:
- 3rd Year:
- Internship:
- 4th Year:
- Real World Engineering:
- Recommended Approach to College Advice from u/MustardMan007:
- Try to enjoy college.
- Advice from u/Possible_Ad3887: Engineering school is a wild ride:
- Contact the Mods
r/EngineeringStudents - Approach to the College Career
Approach to the College
Author u/PrimeOG_Legend - A graduate Mechanical Engineer (grad in 2023) with concentration in Aerospace Engineering, and professional experience in Software Engineering (job) and Nuclear Engineering (job). Majored in Mechanical Engineering and was fortunate to find many opportunities to learn and work in other disciplines to accumulate a broad experiences.
What Major to Choose:
As for the major, I would suggest thinking about what would be useful in 4 years (the time you'd be graduating) that you also like.
At the current pace of AI, Computer Science would be absolutely obliterated as a job market, legal sector would probably be next, and graphic arts / web design would be pretty gone in four years as well.
The goal is to choose a job that would be safe from AI but still passionate to you and then choose the major to help you get the job. You will revisit this subject more than once in your college career.
College really isn't about learning, it is more entirely about getting a piece of paper called a degree that shows that you have some knowledge and experience in a certain job market, therefore you are more "valuable" than a fresh high school graduate with just a diploma.
How do you accurately figure out a job’s demand?
If you’re from the US, U.S. Bureau of Labor Statistics : U.S. Bureau of Labor Statistics is a good source to start with.
Personally, I also use reddit and check the subreddits of the jobs I have an interest in. I also look at entry level job requirements for those jobs, usually if an "entry level" position job post requires "2+ years of experience", then it is safe to say that job market is officially cooked.
Also typing in your desired job like, "UX for Consumer/Tech", into google and clicking the News tab, it will show you the news of that industry. If there are no new events of mass layoffs in the news, then the job market is relatively healthy.
Ultimately, combining multiple sources is the key here. There is no end all solution to this one.
GPA:
High school GPA only matters for getting into a college. After that, it has served it’s purpose. Going to community college and completing a semester or two there will then give you a college GPA, and once you have that, no one looks at your high school GPA anymore.
Community College Versus University Straight Away:
First, I absolutely think you should do community college. It saves you a lot of money and gets your pre-requisite classes (like math, English, history) out of the way.
I wish I had known about this before going to university for 4 years, I would have saved myself $10k at least by going to community college. The professors at CCs are a lot more passionate about teaching (what they do) as well.
University Professor Rushing:
Most professors - especially at big universities - rush through lecture content because they are not paid to be giving lectures. Majority of professors are hired by a college to do research there, which is why a lot of engineering professors have their own lab or projects going on. Teaching a lecture is more like the unfortunate side effect of being able to do research at that college. It is very easy to tell which professors are there and want to be teaching vs which ones are just there because they have to be.
1st Year:
During freshman year is the year you are going to focus on three things:
- High GPA - get good grades because they matter most in the first 2 years
- Join a project team - during freshman year it is typically free to join as many engineering projects as possible such as IEEE, Formula Team, Drone Team, etc. You are going to join all of them until you find one you like (this will get you a job after graduating).
- Finding a way to love math - the rest of your engineering career is going to have a lot of math and a lot of physics. Your freshman year is best time to find systems that work for you and learn how to learn. You will need all the math you learn, because next year's classes build upon the math you learn this year. Just a hint, everything is founded upon calculus going forward. Get good at derivatives and partial derivatives.
- How do you get yourself to love math?
I used to tutor math and noticed most people dislike math or are scared of it because they do not truly understand it.
What helped me love math the most is understanding how it can be applied. Learning the application of the math alongside the formulas is the key here. I hated calculus until I realized I can use it to code an auto-tracking turret in a video game I loved playing at the time. After that I started loving doing the actual equations and learning more about what I could use them for.
2nd Year:
This is the year you are going to get serious about 3 things:
- Job market demand / Your demand - figure out what type of job you want when you graduate. No, it's not too soon to think about this subject. It is better to have this figured out sooner than later because next year (this year if you’re lucky or Junior year) you will be getting an internship in that job. Research what the job demand is for that specific job in today's current market. If the job demand is essentially zero (like it is for software engineers or CS students), then aim for a new job. It's the hard truth but it will help you after you graduate. If you’re from the US, U.S. Bureau of Labor Statistics : U.S. Bureau of Labor Statistics is a good source to start with.
- Project Group - Okay now that you've found a group you actually enjoy, double down on it. Attend every meeting, every event, contribute as much as you can, try to get onto the competition team if there is one. At this point you'll have almost zero engineering skills to contribute, that is okay, you should have seniors/juniors and a lot of mentors in the group, this is time to go and ask them to learn something from them, or shadow them, or simply ask them "Hey what should I know if I want to be successful in this project and as a career in the field?"
- Networking - Very important! This will get you a job later! This requires social skills, start the process on learning to talk to people to see who or what they know about a job. Go out and ask for jobs or internships and learn to get rejected and keep moving onto the next opportunity. You are not trying to perfect this skill, but you do want to get started in it. Do not wait until senior year to start networking, it will be too late by then because you need to be good at networking by junior year.
- Employers are coming to campus, find out when and where, then go to the job fair and talk to as many of them as possible. “Do not follow the herd,” you’re best chances for an internship/networking is with a recruiter that doesn’t have 100 people waiting in line. Those people are taking resumes and moving people through as fast as they can.
- Communication seems to be one of those skills that doesn't get nearly enough attention during engineering degrees. Being able to solve an engineering problem is one skill, but convincing a manager, client or someone from another discipline that your solution makes sense is another entirely. Your pitched solution in this case is “why hire me!”
- Learn interview techniques and practice them with your friends. You’re working on the “why hire me!” answer.
3rd Year:
This year is a bit more chill, you only have two things to work on:
- Finding an internship: Typically, students will have internships during the summer between their junior and senior year. This gives you experience that you can put on your resume and allows you to network within that company to potentially secure yourself a job after you graduate.
If you are a junior now and you cannot find an internship, that is okay. You just need to contribute and participate even more in your project team. The whole idea is to list resume working experience, so you stand out from the people who only graduated and did nothing else but get a degree.
2. Finding a professor to work for as Federal Work Study (FWS) that has engineering experience or project: This is probably the most beneficial advice that I was never given that I wish I had. But find a professor that teaches a class that you like, where you genuinely enjoy the topic of the class, and ask if they have any student work positions available, or a lab that you can work in.
This will allow you to get hands on experience in real engineering shit that you can also list on your resume. Sometimes, it will even land you an internship and a full-time job after graduating.
Internship:
The internship is not the end all be all of engineering, but boy does it help. It does not matter what type of internship you get, whether it is in a field of engineering that you enjoy or not. It does not matter because it is very temporary. What does matter however, is networking with real working engineers to get a job at that company or get a job at a company that the engineers might know is hiring.
You should also learn literally everything possible that you can here, even if you do not think you will be working in the specific field of the internship. Absorb as much knowledge as possible because most engineering is structured the same: from requirements to proof of concept to final product shipping. For example, if you get an internship at a construction company but have no interest at all in construction, then hide the fact that you do not want to be there and instead focus your energy on learning the systems of how the company works, how they validate products and results, who generates the requirements for the project, how money flows to fund the project. All of this knowledge is transferable to other engineering fields.
4th Year:
Just graduate. Seriously, at this point you will be absolutely tired of the engineering grind, barely scraping by to get a degree, and wanting to quit/give up at every moment. This is normal, just focus on graduating.
Typically, you'll have a capstone project that is required before you graduate. You can list this as resume experience too. If you have the willpower for it, try to get yourself into a leadership role on this capstone project (project engineer, subsystem lead, principal engineer, etc) because you will need to be able to talk about leadership opportunities during technical interviews with employers (such as Raytheon).
Real World Engineering:
So in the real-world junior engineers (entry levels) do not design the parts on their own. Most of the work as a new hire is reviewing the parts made, making sure it fits in an assembly, and/or conducting mathematical analysis such as FEA or thermo-analysis on the part depending on the application of the part itself.
A Senior engineer would be the one that actually designs the part to be used. So, in your first year of working, you will not be designing parts yourself, but you will be dealing with assemblies with parts that are assigned to you.
For example, at Boeing, there is a whole team that does nothing but design and analyze parts, then passes the finalized design to the assembly team, which is responsible for putting parts together to make a plane virtually in CATIA (software like SolidWorks). It would depend on which team you get hired on, but most generally the design team is a team of seniors / more experienced engineers.
Also, in the car manufacturer and aerospace world, everything has a digital twin. So for example, there is a CAD file somewhere out there that has the entire F-35 Lightning Fighter Jet completely made virtually before it even enters production. Most (if not all) companies have moved to virtual testing. Which means instead of building the prototype and testing it in a real-world scenario, companies just build it virtually and subject it to virtual tests instead. The virtual tests can explore design regimes deemed too dangerous to actually perform. Eventually there are some real tests but the virtual testing cuts way down on the actual tests which can be tremendously expensive to perform.
SolidWorks Knowledge:
The way the solid works class is laid out is usually just an intro class to SolidWorks. You can think of it as a big picture exposure to everything SolidWorks can do that would be useful to you as an engineer. In one semester you can get a glimpse of the software and how it works.
However, one semester is not enough to become proficient enough with it to put on your resume or go into a real-world job and start doing SolidWorks right off the bat of being hired. For this type of experience, you should join a project or club or team that is required to use solid works for their "product" and gain experience by using SolidWorks in a real project environment. For example, my SolidWorks class made me create a coffee mug and extrude it to be 3D. However, my capstone project was constructing a 3U Cube satellite where I had to work with others to use SolidWorks to do FEA (finite element analysis) on the structure of the satellite frame to make sure it would not break under load during a rocket launch - much more useful application of SolidWorks here.
How much do you have to love your job versus it being secure and well paying?
I would advise you to get a job that you love. From my experience, I left a really well-paying nuclear engineering job ($150k USD a year starting pay) because I absolutely hated every second of being in that office environment. The security and pay of that job was the best it ever gets, but I was willing to walk away from it because it was draining the soul from my body and leaving me exhausted every day to the point I was only living just to go to work.
So, if you find yourself not enjoying MechE Design, definitely learn what you can from it to apply to somewhere else.
=============================================================================
Recommended Approach to College Advice from u/MustardMan007:
I just finished the first year of my career in mechanical engineering. Figured I'd circle back around and offer some advice. For context, I work in the downstream oil and gas industry as a reliability engineer. Here's some advice I wish I had while I was in school:
Try to enjoy college.
- This is a fantastic time to explore who you are, figure out what your interests outside of school are, and develop lifelong friendships. You are there to study, yes, but you're also still living your life. Enjoy it.
Develop your social and interpersonal skills.
There are too many engineers that struggle in their careers simply because they don't know people. You are going to ask 10 people for 20 things every single day. Learn how to get people to want to help you rather than being a thorn in their side.
- Pursue real world experience through internships. I'm going to be honest, your 4.0 GPA does not impress me. Your experience in streamlining a process, implementing a program, or otherwise adding value to a company impresses me. You need to add more value than you are taking home in pay.
- Who you know matters I only got my current job because I networked through a classmate that had previously gotten an internship at this company. This all ties back into enjoying your time in college, meeting new people, and building a network of people that can support you.
=============================================================================
Advice from u/Possible_Ad3887: Engineering school is a wild ride:
- Part brain workout, part emotional rollercoaster. Between late-night problem sets and mentalmeltdowns, here are 4 things I wish someone told me earlier:
- Master the art of learning University won’t teach you everything and that’sokay. What really matters is how quickly and effectively you can teach yourself. Whether it’s a new software, a weird problem, or a subject you barely understood in class — learning how to learn is your most powerful tool.
- Ask questions, always There’s no such thing as a dumb question in engineering. If you’re confused, speak up — because chances are, others are too. Being curiousand unafraid to ask is what separates good engineers from great ones.
- Use your digital toolbox Don’t suffer in silence — you have access to ChatGPT, YouTube, Google, Reddit... these are your secret weapons. Learn how to search smart, follow tutorials, and troubleshoot on your own. It’s a vital skill in the real world.
- Start networking early Engineering isn’t a solo journey. Get involved — join clubs,attend events, connect on LinkedIn, ask for internships. Your future job might comefrom a conversation, not a CV.
Bottom line: Engineering isn’t just about passing exams — it’s about becoming a creative problem-solver. Stay curious, fail fast, learn faster. You’ve got this.
- Top 10 CRUCIAL tips for every freshman engineering student: Becoming an Engineer https://www.youtube.com/watch?v=9rt2OJuXxZg&ab_channel=BecominganEngineer
- Tips and Tricks I Used to Pass My Engineering Degree! How to Actually PASS Engineering: What Your Professors Won’t Tell You -Rafael Sigmada https://www.youtube.com/watch?v=ePgDZJURDVE&ab_channel=RafaelSigmada
Contact the Mods
Have a question, issue, or suggestion? Message the mod team.