r/GlockMod • u/--Combat-Wombat-- • 4h ago
r/GlockMod • u/greekplaya990 • Dec 09 '25
Reddit Gun Network Subreddit List 2026
reddit.comr/GlockMod • u/Dramatic-Table3574 • 12h ago
New build...
Faxon Fx19 Hellfire upper - GG19 stripped lower
r/GlockMod • u/Aware_Background_997 • 6h ago
does anyone know why my gun has failure to return to battery?
my g28 frame and g26 slide gen 3 has failure to return to battery whenever i rack the slide it feeds a bullet then the slide slightly goes out of place before snapping into the correct spot can anyone give me any tips?
r/GlockMod • u/hndrck_ • 11h ago
Glock gen 3 with Performance trigger has light strike?
My G19C gen 3 has about 2k rnds on its firing pin. It has stock springs. I recently slapped the Glock performance trigger and gen 5 back plate on it. Ive been shooting some Eastern European made in bosnia ammo, maxxtech 124gr. And on my g19.3 it keeps on getting light primer strike. Yet on my g47.5 with a GPT it doesn’t. (G47 has 3.5-4K rnd on it) What are somethings I can do to diagnose the root of the problem??
What I’ve done so far: check and cleaned trigger, check sear engagement it’s healthy
Cleaned and dried the firing pin channel, re did the firing pin channel sleeve.
Checked the firing pin condition visually it’s healthy nothing out of the ordinary
It runs federal 124 HST perfectly fine
r/GlockMod • u/Jdubb83 • 1d ago
Newest setup
Grit grips frame w/ overwatch polydat trigger.
r/GlockMod • u/Z-Goose • 1d ago
Glock 17 complete
My G17.1 (remake) sent her to the GS to have ported and optic cut. Added GS extended controls. Polished trigger. Holosun dot and HandkeItGrips (a must for me). Got trigger pull down to 3.5#. The only other things I want is a steel recoil assembly and maybe a brass plug to give her more weight.
r/GlockMod • u/VinV01 • 15h ago
Safariland 6354 RDSO
Can anyone confirm if the g19/45 (gen 6) fits in a previous gen Safariland (g19/45 gen 5)?
TIA 🙏🏼
r/GlockMod • u/Euphoric-Ad-6878 • 20h ago
Help with polydat trigger shoe
I have multiple other polydat triggers and never had this issue before so im a lil confused. Shoe is too wide cause slide release to not fit around it? did i buy the wrong shoe or?
r/GlockMod • u/Black_Kais3r • 1d ago
Linear Comp Slaps
I recently purchased the strike industries linear comp for shits and giggles and was planning to put it on my CZ scorpion s1 but first wanted to try it out on my Glock 17 g3. Definitely improves follow up shots.
r/GlockMod • u/Consistent_Class508 • 1d ago
I present to you, John-117.43X

Finally complete with the addition of the custom backplate from Classy Raptor Tactical.
OEM Coyote slide and internals +Radian Ramjet/Afterburner (sprayed with ODG Aluma-Hyde 2)
TruGlo Tritium X night sights, EPS Carry green dot
Grit Grips frame with magwell, OP PolyDAT trigger shoe, OEM lower parts for rest
Handleit grips Edge series grip tape (cut to fit)
TLR-7X Sub with Tactical Force pedal and Emissary Paddle Shifter button replacement
Pearce mag grip extension
r/GlockMod • u/Nearby_Dirt_4485 • 1d ago
High-res orthographic reference photos of a Glock 17 Gen 3 (all 6 sides) for a 1:1 scale replica build Spoiler
I’m currently building a 1:1 scale physical replica of a Glock 17 Gen 3, and I’m looking for clean, straight-on reference photos to make accurate templates. Most photos online are taken at slight angles or have lens distortion, which throws off the dimensions (especially around the trigger guard and grip).
If anyone owns a stock Glock 17 Gen 3 (or an accurate 1:1 Gen 3 replica/airsoft model) and has a few minutes to spare, I would really appreciate photos taken straight-on from all six angles against a plain/contrasting background:
• Left side (flat profile)
• Right side (flat profile)
• Front (muzzle end, level with the bore)
• Back (rear slide plate / backstrap view)
• Top (looking straight down at the slide and sights)
• Bottom (looking straight up at the rail, trigger guard, and magwell)
A couple of quick tips to avoid camera distortion if you're willing to help:
• Place a ruler or a sheet of grid/graph paper next to the frame so I can verify exact millimeter scaling.
• Hold the camera a bit further back and zoom in (2x or 3x) rather than shooting super close with a wide-angle lens—this keeps the proportions flat and orthographic.
Thanks in advance to anyone who can help out! I’ll gladly share the finished 1:1 printable templates with the sub once I have them dialed in.
r/GlockMod • u/suatkelem • 1d ago
Manual safety for Glock 17L with Recover Tactical 20/20 and frt
Before diving into the SMG world, I decided to experiment a bit more with pistols first. Picked up a Glock 17L in pretty decent condition, and I’m planning to turn it into an FRT build.
My question is: is there any way at all to add a manual safety to a Glock?
On the pic:
Glock 17L Gen 3
Recover Tactical 20/20 brace
A3 angled front grip
PB-3 red dot
X300 (for upvotes 😁)
Some $10 laser sight from Amazon
Magpul 50 round drum magazine
To be installed:
SilencerCo threaded barrel
A.R.T. trigger
A.R.T. compensator
Recoil spring for frt (bought several of different weight to adjust while practice)
UTG light and laser sight (it seems to me a laser sight makes sense when shooting from hip)
r/GlockMod • u/TxTradman68 • 1d ago
Recognize this trigger ?
It’s in a G35.4 I come across on a deal