r/knifemaking • • Feb 21 '18

Official WIKI Have a question about knifemaking? START HERE

Thumbnail reddit.com
89 Upvotes

r/knifemaking • • Dec 22 '23

Mod Post Update to self promotion rule

65 Upvotes

Hello all, after quite some time I have decided to reevaluate, the old rule preventing sales posts and self-promotion. The rationale behind the change is that the makers will benefit from community support. There has been hesitation to change the rule based on the idea that sales post will run rampant if allowed; however, I have some requests in exchange for those who want to post a link to their website.

All criteria must be met.

  1. Items for sale have to be made by you.
  2. There is a detailed specification list for the item being displayed. you can find an example here, does not have to be as in depth; however, at a minimum you have to have steel type(s) and handle material(s). Simply stating damascus will not be enough for future posts.
  3. Only knives and supplies related to knife making can be sold. You can sell knives, handles, scales, or handle materials. As a reminder, you cannot sell items that are not made by you; you cannot sell a bench grinder here.
  4. There is no price displayed. Pricing cannot be discussed in public whatsoever.
  5. You must be active in the post you make. You cannot just drop your website link and disappear. I am not asking that you respond to every comment on your post or that you reply to a comment on a month-old post; however, some effort must be put in.

There are a few additional limitations to this change

  1. Do not put "available" or anything of the likes in your title. All indications of your work being for sale must be in the description or comments, I suggest the latter as I will remove your entire post if you do not meet the above criteria if it is in the description rather than just deleting a comment
  2. Your posts should not all be advertisements; you should show off your work without all your posts having a link to your website.

I hope that this change to the rule is favorable, if you have feedback or comments, I would like to hear it and may make changes accordingly.


r/knifemaking • • 4h ago

Showcase Blue titanium, Damascus, and a teddy bear with an attitude

Thumbnail
gallery
12 Upvotes

Here’s a recent engraving project from our shop at Noblie Custom Knives. I wanted the artwork to read as one image across the lockbar cut, so I included a close-up of the scales before assembly and another shot with the pocket clip installed. You can see how much of the bear is still visible once everything’s together.

We also used the laser to produce the blue color on the titanium itself. I’m happy with how the darker lines in the stitching still show up against the blue.


r/knifemaking • • 16h ago

Feedback WHITE AND GLOW

27 Upvotes

Which set do you guys like the best? Playing around with color combos today.


r/knifemaking • • 1d ago

Showcase Been a little bit, but I wanted to share these new Raptors I just finished!

Thumbnail
gallery
202 Upvotes

Really proud of how these turned out. Blades are AEB-L, heat treated to about 62-63 HRC. Mix of Micarta and G10 on the handles scales, so much work went into the CAD on those! Really wanted to make them look like a Velociraptor claw🦖


r/knifemaking • • 20h ago

Showcase Axe Handle Prototype

38 Upvotes

Been working on this one for a minute now, it's a new prototype! Calling it the "Haft" after it's axe shaped handle inspired by Bill Ruple and his traditional axe handle slip joint knives. I'm in LOVE with it 😍 It has a Flint Lock blade which I feel really works with the overall flow of the design. Stonewashed CPM-154 blade at 63 HRC. Gorgeous chatoyant Curly Siam Rosewood procured from @greenberg_woods paired with royal blue G10 liners and pins for some nice contrast to the reds and oranges on the wood. The sheath was skillfully made by my father @trilobiteleatherworks and truly elevates this build, I couldn't be more happy with how the entire package turned out. I'll be making more of these for sure (one for myself 😅) in the future! This one is spoken for.


r/knifemaking • • 1h ago

Question Type of Metal question

Thumbnail
gallery
1 Upvotes

Hey there. I was hoping to make some cheese knives out of some scrap metal I found. Pretty sure it was kitchen stuff but not entirely sure (found at good will). Metal bends relatively easy if you bend the areas where it’s bent. Doesn’t shoot off a ton of sparks will light application to a grinder. Makes rolled edges/lips when cut with a grinder and isn’t magnetic. Is this aluminum?

I know the metal isn’t ideal but it’s for blunt cheese knives


r/knifemaking • • 2h ago

Feedback New line of Customizable Sheath Belt Clips

Thumbnail
gallery
1 Upvotes

Hey all, Ive been working on a new line of BVL Belt Clips for Knives. These are similar to the DCC clips we all know but are a hair thicker and different shapes. Im making these so theres a spot for custom makers logo to be etched in the front. Im starting with about 5 styles, all for 1.5" belts to start except a shorty version for your pocket and a offset style. Please let me know your thoughts on this project, as far as the pricing, what shapes and lengths might be best, I'll be selling the first batch discounted in exchange for feedback.

Specs:

-.040" Spring Steel

- Black Oxide Conversion Coating

-Sold as Blanks ( my logo will be located down near the harware) or Customizable with minimum of 10 units.

- 1-10 pcs will be $12 each, 5 pack $55, 10 pack $100

-Logo etching prices will be 10-19 Pcs $1.50 each, 20-49 Pcs $1.25 each and 50+ will be $1 each

Heres a photo of laser cutting and the mixed bag of 100 samples before Oxide coating


r/knifemaking • • 9h ago

Question Damascus steel gauntlet

3 Upvotes

So this is a deep search question. I remember about 10 years ago finding a picture of a knife maker's one off project. It was a Damascus steel gothic gauntlet. The only thing i remember from the picture was that it was mounted horizontaly on a wooden stand.

Does anyone in the knife maker community know this project or knife maker?


r/knifemaking • • 21h ago

Showcase Another pocket fixed blade

Thumbnail
gallery
30 Upvotes

I made another pocket fixed blade out of 80crv2
5”overall length 2.5” blade.
I have gotten a lot of encouragement from people at my Muay Thai gym after the knife I gifted our coach one and a competitor one for winning championships, I did get some offers from people from people to buy one but i know I’m still far from making sellable knives but hopefully we’ll get there soon.


r/knifemaking • • 22h ago

Showcase One down, one more to go

Thumbnail
gallery
18 Upvotes

This karambit is 1 of 2 projected commissioned by a USMC brother. One of the biggest challenges to date. This is the first Karambit I’ve made and it’s made from 52100/15n20 Damascus, random pattern. Custom handle resin scales, USMC mosaic pin and peened brass pins. This project is the first time I took my time with the design, researching, logistics, materials and manufacturing(same with the Kukuri).


r/knifemaking • • 1d ago

Feedback #5, a lot of firsts in this one!

Thumbnail
gallery
30 Upvotes

Knife number 5 for me (plus 3 railroad spike knives but I consider those letter openers). I am having a blast learning knife making and a friend who liked my work wanted to commission a couple blades (understanding that I am still new). We picked out a style and materials - nothing too hard or fancy but will require me to learn some new things...

This is the finished prototype to test the design, construction, and features he wanted. Some big firsts for me:

- using micarta, and scalloping handle

- sandblasting & parkerized finish

- working with kydex

Got to say it was a big success. Its not perfect, but I am keeping this one myself anyways. All the new things I tried worked pretty well but some things to improve... the scalloping turned out fine but I did a kind of random go at it. The scallops on one scale don't line up with the other side and it bugs me. Its not a big deal, but I decided for a knife I'd like to sell I will put guide marks on it and make them evenly spaced. My production pieces that followed were perfect in that regard. Kydex - looked easy in tutorials and was pretty easy until I got to adjusting the retention. Man is that fiddly getting it right. I trimmed off too much on this one but it still seems plenty secure (been my EDC now for a few months).

And my biggest struggles? Still the basics - getting the bevel lines and plunge lines matching side to side. Still going to take some more practice on that. Also I've found electro-etching works well but using my Cricut to cut out vinyl stencils limits how fine I can make the print. Its a pain in the butt to make really small fine letting that way. I can see a big advantage in lasers, but dang those are expensive for just doing some engraving.

I've already completed the three commissioned blades based on this prototype - this was a few months ago, I'll post about them when I get the pics edited, but still open for CC - I know I am newer and learning. Oh some specs... this one is 1084, with green/black layered micarta (honestly in person it looks much darker - green isn't very noticeable, blade darker too). 3-3/4" blade and 8" overall. It was designed to be about as large as EDC knife as still practicable. While the blade is fairly long and wide for EDC. the handle is a bit on the lean side so its not too heavy and still disappears in hiking pant pockets with deep carry clip. I am also designed a slightly smaller variant, same size handle since its already slim but about 3/4" shorter blade.


r/knifemaking • • 1d ago

Showcase Skeleton dagger / D2 steel.

67 Upvotes

r/knifemaking • • 1d ago

Showcase Made another little guy, really happy by how it came out, customized commission for my client

Thumbnail
gallery
122 Upvotes

9KhS, Soviet chromium-vanadium high carbon steel blade, Caucasian Walnut handle, Brass inlay and guard, Textolite spacer


r/knifemaking • • 1d ago

Question Should I make this a member of my line up? I would offer with choice of actual scales,Ito Wrap, or Bare metal

58 Upvotes

r/knifemaking • • 1d ago

Showcase Magnamax

Thumbnail
gallery
58 Upvotes

Finished up this customer submitted design. With Jhue customs scales with copper and glow liners.


r/knifemaking • • 1d ago

Work in progress Hand Satin Goodness

55 Upvotes

This hand satin makes me feel all warm and fuzzy inside 🙂 Next step, scales! Stay tuned, this little guy is getting the royal treatment with OPAL scales 😍💎


r/knifemaking • • 22h ago

Feedback Something seems to be missing.

0 Upvotes

r/knifemaking • • 22h ago

Feedback I think that something seems to be missing. What should I do?

Post image
0 Upvotes

r/knifemaking • • 1d ago

Question Feasible stock?

Post image
9 Upvotes

Found this piece of steel on the job site and am wondering if it's even worth trying to shape and grind it down to a knife. I know nothing about this piece other than that


r/knifemaking • • 2d ago

Question Utah Knife Makers Willing to Help Heat Treatment

4 Upvotes

Hey there! I'm a beginner knife making hobbyist in Utah. I'm making some knifes for Christmas presents and I was wondering if anyone local would be open to austenatizing them for me? Of course I'd be willing to pay. I'll have a four knives in 1084 and one in 80crv2.


r/knifemaking • • 2d ago

Question Sanmai with Thick Billet Layers

4 Upvotes

Hey all. I've been wanting to do some more sanmai but was wondering how the soft cladding would move under the hammer in thicker billets. I've only done sanmai once a while back with like 2-3mm layers of 1084 and wrought iron.

I have a slab of 1095 at ~3/8" thick and was planning to pick up some 1008 or 1018 of the same or slightly higher thickness, maybe wrought if I can get my hands on some more. Last time I went with a 2:1:2 ratio and had issues with cladding reaching the edge so I was thinking to give a little more room for error with a 1:1:1; maybe 1/2" : 3/8" : 1/2"?.

My question is: would these thicker layers (3/8" each) lead to issues with cladding deforming too much and core steel remaining thicker during the forging process? Have any of you done similar billets? This will also be forged out on a power hammer.


r/knifemaking • • 2d ago

Feedback Edc I finished up last week. Nitro-v ssteel with a stabilized bog oak handle and stainless pins handstiched Herman oak leather ssheath by me

Thumbnail
gallery
146 Upvotes

r/knifemaking • • 2d ago

Showcase OG V2 tomahawk I made a while back

69 Upvotes

r/knifemaking • • 2d ago

Feedback Knife #6, first forged one

Thumbnail
gallery
42 Upvotes

Knife #6

Procut
Forged
Desert Ironwood with copper spacer
171mm long, 52mm tall at the heel.
Distal taper starts at 2.6mm, 2mm at the mid point, 1.2mm where the Ktip starts to dive.
172g total weight, blade weight is 97g (ironwood is heavy AF).
Balance point is around the ferule. Light blade + heavy handle makes for a handle heavy knife, but it doesn't feel bad at all

Decided to take this bunka thinner than what I have done previously and it paid off. I went fully convex on both sides, but felt a little more food release might be nice so I also put in a subtle c grind that you can see in the spine shot at the tip. It really made food release pop.

Forging the whole blade was fun and made getting the bevels in a lot faster. I didn't forge too close to shape since it was my first time, but it significantly cut down in the over all time. I'll try going closer to shape next time. Forging is also more fun than grinding.

Worked on my polishing a bit and I'm pretty happy with how this one turned out. Not a mirror polish, but there aren't any super visible scratches, so I'm happy there.

I spent some time making sure my glue up was super clean, and also included some pics of the spine to try and show the curvature on that.

Speaking of the glue up, you can see I didn't quite nail getting it perfectly square... Doh. I was too focused keeping it clean that I missed that slight tilt. It's pretty subtle though and didn't notice until I went to take the choil shot. It didn't seem to effect cutting that I could tell. I use hot glue for my glue up, so I could fix it relatively easily. I also decided to shorten the neck(?) of the knife too right before my glue up. One side I nailed, the other I slipped just a bit (so you can see a little raw metal right before the ferule). I'll probably coat that as well using a tiny paint brush.

Speaking of the coating, I decided to leave this in my "patina solution", which resulted in this dark brown color that pairs nicely with the ironwood and copper, but what you can't see is that in person it has an almost oil slick kind of rainbow look to it. Pretty cool if you ask me.

Performance wise I'm really happy with this one. I'd say it rivals my Tim Hoover, which is an absolute laser. His is definitely slightly more effortless though (and his fit and finish is much better than mine). I'd put this one on the light side of a middle weight. I'll upload a video at some point.