r/materials • u/Vailhem • 2h ago
r/materials • u/MatterSeek • 9h ago
What do you write down before comparing two materials-screening workflows?
We’re the MatterSeek team at Yuyao Technology. When comparing materials-screening workflows, we suggest writing down four things in advance: the target property and test conditions, hard constraints, reference evidence, and the first follow-up check.
The last part is where we’d like to hear other approaches. Before screening candidates, do you define a specific result that would rule a candidate out? For example, if a candidate meets your target property in a calculation but falls outside the processing window you can actually test, do you drop it or keep it for a separate round?
We’d be interested in examples from either computational or experimental work. A general or non-confidential example is plenty.
r/materials • u/LinaCeramics • 17h ago
What's the most unexpected cause of premature wear you've come across?
I've been thinking about how often wear problems get blamed on the material first.
But sometimes the material isn't really the problem. Poor alignment, unexpected loads, lubrication issues, or even small changes in operating conditions can make a big difference.
I'm curious about the cases that weren't obvious at first.
Have you ever dealt with a part wearing out much sooner than expected, only to find out the real cause was something completely different?
What was it?
r/materials • u/Safe-Law8961 • 23h ago
Question about electrodeposited p-SnS absorber layers: how much do deposition potential and substrate matter for PV efficiency?
reddit.comr/materials • u/Vailhem • 1d ago
Two-dimensional material membranes with precisely tunable interlayer spacing from nanometre to submillimetre | Nature Materials
r/materials • u/No-Direction-727 • 1d ago
How do you check the fit of a ceramic plunger and sleeve after measuring both parts?
I work with precision ceramic parts. After measuring the plunger OD and sleeve ID and checking roundness, we do a simple bench check to see whether the plunger moves slowly and smoothly through the sleeve. For those of you who work with close-fitting parts, how do you check the fit before installation?
r/materials • u/Plastic_Clock2179 • 3d ago
What’s the difference between a property and an attribute
r/materials • u/chrispaul765 • 2d ago
Could chip-scale electron accelerators enable new microscopy applications?
I recently read about dielectric laser accelerators (DLA) and had this thought of whether they could eventually enable new types of electron microscopy or materials characterization.
I am not trained in material sciences so I wonder: are there applications where this would offer a meaningful advantage over existing instruments? What capabilities would make it genuinely useful?
Appreciate your thoughts on this. Thank you.
r/materials • u/jer6776 • 3d ago
I don’t know where to post this, hoping somebody might point me in the right direction
is there any material that I can cover or soak this in so the plastic doesn’t fluoresce? i’d like these to not glow under a black light but sunscreen didn’t work and I’d like to avoid paint. it’s LEGO ABS plastic and I’ve had trouble finding any answers
r/materials • u/Stevemdi • 3d ago
[article] Ru 1 − x Cox)2FeSi Heusler alloys: Bridging spintronic, energy harvesting and high-strength structural applications
r/materials • u/Naa_b321 • 4d ago
[ARTICLE] Photovoltaic performance improvement of organic solar cell with ZnO nanorod arrays as electron transport layer using carbon quantum dots-incorporated photoactive layer
r/materials • u/ComfortableGold8398 • 4d ago
How did you actually learn metallography? Looking for advice on how to develop a better understanding of microstructures.
I am currently learning metallography, but I find it difficult to organize and connect all the concepts. I often get confused between phases, microstructural constituents, and the various structures found in different alloy systems.
For instance, when studying carbon steels, stainless steels, aluminum alloys, or copper alloys, I struggle to build a coherent framework that helps me understand what I am actually looking at. There are so many different phases, constituents, transformations, and microstructures that I sometimes find it hard to classify and distinguish them.
However, I believe my main challenge goes beyond just memorizing the names of the phases.
I want to understand how the microstructure relates to mechanical properties. Why does a specific microstructure result in a particular mechanical behavior? How do phases, grain size, morphology, distribution, and heat treatments influence strength, hardness, ductility, toughness, etc.?
Sometimes I feel like I am just looking at micrographs without really knowing why. I can observe a microstructure, identify certain features, or describe what I see, but I don’t always know what conclusions to draw from those observations or what I am supposed to learn from them.
I would like to move beyond simply recognizing microstructures and develop the ability to interpret them from a metallurgical perspective.
I also have access to an inverted-stage optical microscope, which gives me the opportunity to practice and examine actual metallographic samples. I would like to make better use of this opportunity.
My questions are:
How did you learn metallography? What approach or learning method worked best for you?
How do you organize your knowledge regarding phases, microstructural constituents, and different alloy systems?
How did you learn to relate microstructures to mechanical properties and material behavior?
How do you practice? Did you use textbooks, microstructure atlases, reference samples, or did you systematically examine specimens under the microscope? If you were to start over, what would you do differently?
I’m not necessarily looking for a list of textbooks. I’m particularly interested in your learning process—how you developed the ability to interpret microstructures and how you moved from merely observing them to truly understanding their significance.
I would greatly appreciate hearing about your experiences and any advice you might have.
r/materials • u/Vailhem • 4d ago
A new twist on 'magic-angle' graphene: Tuning resistance with strain
r/materials • u/Vailhem • 6d ago
Scientists Just Found a Key Ingredient for Superconductivity at Room Temperature
scitechdaily.comr/materials • u/loqueseteantoje • 6d ago
Reflection characterization lab
reddit.comToday, during my Materials Characterization Laboratory, we conducted a series of tests on different polymers to study their mechanical properties and how they behave under different conditions.
One of the things that caught my attention was observing how, when exposed to heat, a polymer's molecular structure could rearrange, allowing it to take on an entirely new shape. However, what truly made me stop and think was its behavior during a tensile test.
The machine began applying force to the specimen, gradually stretching it. We expected it to eventually reach a point where the material would yield and ultimately fracture. But that never happened. It continued deforming, enduring increasingly greater amounts of tension, even when the testing machine reached its maximum capacity. The specimen never broke.
At the end of the laboratory session, while everyone else was disposing of the tested materials, I decided to keep that particular piece of polymer.
I am not entirely sure why, but looking at it made me reflect.
How much must a material change before it becomes something different? How much energy must it absorb to abandon its original structure? How far can it withstand tension before reaching its own limits?
And, most importantly, I began wondering how much of this could be applied to my own life.
Perhaps I, too, have a structure that needs to change. Perhaps there are parts of myself that need to be rearranged, ideas that need to evolve, and limitations I have yet to understand. It is not simply about enduring more pressure or resisting indefinitely. It is about understanding what I need to change in order to become someone capable of achieving what still seems beyond my reach.
That piece of polymer did not break the machine's measurement limits; it simply exceeded what the instrument was capable of measuring.
And I believe that is the reflection I took away from the laboratory:
How far can I go before my own limitations stop being a measurement of what I am and become merely a measurement of what I have yet to learn to overcome?
I walked into that laboratory and left with a piece of plastic that was destined for the trash.
Thank you, I just wanted to share my thoughts.
r/materials • u/Successful-Lab8951 • 7d ago
How employable/in demand are materials engineers?
I’m currently a freshman ChemE major in college and I’m really considering switching to materials science engineering because I feel like I would not enjoy chemical engineering at all and would enjoy working with materials a lot more. The only possible thing that would stop me would be if materials engineering was not in demand at all/has very low employment.
r/materials
•
u/fishdefish
•
6d ago
Thinking to do MSE in uni. Any advice please?
As the title says, I’m thinking of applying to Mat Sci in uni. I’m currently in Year 13 (UK system), studying physics, chemistry and maths with predicted grades AAB.
However, I’m planning to take a gap year and reapply once I’ve received my actual A-Level results. I’m determined to achieve at least AAA and ideally aiming for A*A*A.
I didn’t started revising until two or three days before my previous school mocks, which is why my predicted grades weren’t as high as I’d hoped. I’ve started taking my revision more seriously now, though, and I’m working towards improving my grades before the real exams.
I was wondering if anyone could offer some advice on what I should focus on during the remaining 6 months before my A-Level exam, as well as during my gap year.
I’m particularly interested in specialising in semiconductors, as it’s an area I find my interest while having pretty decent paid. Of course, I know I don’t need to decide on a specialisation just yet, and I will explore more options further once I’m at uni.
I’d really appreciate any advice, whether it’s about preparing for a Material Sci degree, making the most of my gap year, or anything else you think might be useful.
Btw, any UK uni recommend me to apply to (despite my predicted grades)? Although it’s only around 10-15 uni have MatSci in UK.
Thx a lot!:)
r/materials • u/Possible_Passage_300 • 6d ago
[Article] Study on the mechanism of enhanced conductivity in sputtered MoOx films through heating
r/materials • u/Vailhem • 7d ago
One material, three responses: Mizzou researchers rethink how solids can behave
r/materials • u/Schmorc • 7d ago
In the U.S. is a materials science and engineering undergrad degree worth it over an electrical engineering degree?
I find both majors interesting, although I find MSE more interesting. If I’m concerned about job prospects, is it a bad idea to major in MSE? I would like to get my masters, but that would happen after I find a job.
r/materials • u/piwi109 • 7d ago
Opening Glass Ampoule inside Glovebox

Hi everyone!
Our lab recently purchased some neodymium metal powder (Thermo Scientific, 99.8%, −40 mesh, 25 g), which comes in a glass ampoule sealed under argon.
We're planning to open it inside our argon glovebox, but I'm unfamiliar with this particular ampoule design and the appropriate equipment for opening it safely.
I've attached a photograph of the ampoule. It appears to be flame-sealed, but I'm unsure whether the neck is pre-scored.
For those who have worked with similar materials:
- What type of ampoule opener or glass-cutting tool do you typically use?
- How do you minimize the risk of glass fragments contaminating the powder?
- Are there any specific precautions you recommend for opening these inside a glovebox?
Thanks in advance for any suggestions!
r/materials • u/SwimmingPhotograph35 • 8d ago
From a chemistry bachelors to a materials engineering masters – Struggling with the math side. How to catch up?
Hi everyone,
I recently started masters in materials engineering, but my background is a bachelors in chemistry. While i understand the chemistry concepts, im really struggling with the engineering math and physics (like taking derivatives, limits, logarithms and trigonometric/graph transformations). My undergraduate math foundation wasnt heavy on these, and actually i didnt care it that times as i didnt use them,so when professors jump straight into heavy mathematical derivations, i get lost. For those who made a similar switch:
How did you bridge the math gap without relearning an entire calculus textbook?
What are the best simplified resources, channels, or strategies to understand why these math operations are done physically?
r/materials • u/Brighter-Side-News • 8d ago
Scientists recycle old wind turbine blades into graphene and silicon carbide
A wind turbine blade must survive years of weather, mechanical stress and temperature changes. That toughness creates a difficult waste problem once the turbine retires. Researchers have now demonstrated a way to transform blade material into a useful ingredient for making stronger resin, rather than simply grinding it into filler.
The team, led by Bing Deng at Tsinghua University, used an intense electrical pulse to turn discarded blade powder into silicon carbide and flash graphene. Their findings appeared in Chem Circularity. The process adds a chemical conversion route to existing efforts at blade reuse.
The recovered mixture improved several properties of laboratory epoxy samples at low concentrations. Environmental and economic models also suggested advantages over two comparison routes. Those estimates are promising, but the demonstrated process remains small, and the study did not produce or test a complete replacement wind turbine blade.