r/openscad • u/NdyGen • 1h ago
Parametric clip-free cable lanes in OpenSCAD (openGrid / Multiconnect / screws)
I wrote Snakeway in OpenSCAD because I wanted under-desk cable lanes without clips or zip ties, and I needed the sizes to be parametric.
Cables snake between alternating hooks and stay put. You lay a cable beside a hook, slide it under, and the hook overlaps it so it can't fall out. Slide it back out when you want it free. The holders lock together with puzzle-style tabs.
The customizer is set up in 28 mm openGrid cells: width, length, one lane for thick cables (up to 9.5 mm) or two for thin ones (about 3.7–4.0 mm), an optional stacked-cable hook height, and the mount type — openConnect, Multiconnect, or none, with optional countersunk holes for 3.0 mm wood screws. There's also a snap-on cover. (Multiconnect needs a thicker plate, so the max cable in a 1-lane cell drops to 8.2 mm.) The .scad file is on the model page.
It prints without supports. I recommend PETG, 0.2 mm, 3 walls, 25% infill. The default profile is about 2.3 hours and 56 g on one plate.
The images are renders — I don't have a make photo up yet. It's a free model:
https://makerworld.com/en/models/3625038-snakeway-clip-free-under-desk-cable-lanes
Happy to talk through the OpenSCAD approach or the hook geometry if useful.
