r/Unity3D • • 8h ago

Official We're looking for new moderators

20 Upvotes

Hello everyone!

Together, with you guys (thanks to all of your reports) we've tried our best to keep this sub as clean as we can from rule-breaking and toxicity.

This past year, together with our updated automated systems we've taken (at the time of writing) over 23,000 moderator actions and sent more than 600 ModMail replies.

But unfortunately, even though we've managed to automate quite a few things these past 6 months or so - we have started to build up a backlog as of recently.

With the number of posts, comments, and ModMails coming in every day, it has become a bit too much for the three of us.

For this reason we're looking at adding one or more moderators to help us and we're hoping that there are people in our community willing to help us.

Here is a small list of requirements for those willing to apply:

- You cannot be employed by Unity Software Inc. (Unity Technologies);

- Your account must be at least 3 years old and have a verified email address;

- You must be a frequent Reddit user who has also contributed to this subreddit as a developer (preferably actively);

- You use the Unity game engine either for work, or as a hobbyist whilst actively developing something;

- You must be 18 years or older.

It will involve replying to ModMails and approving or removing posts and/or comments from the moderator's queue.

Prior moderation experience is not required, and we will help you with onboarding. Having said that though: Reddit also provides you with a lot of resources when becoming a moderator.

If you're interested in becoming a moderator, you can apply by leaving a comment below with your time zone, and we'll get in contact with you through ModMail if you're selected.

Kind regards,

u/nostalgicbear, u/hotrian, and u/rlaan


r/Unity3D • • 5d ago

Official Unite Tokyo Keynote and Roadmap are streaming live on YouTube (Nov 16 PT / Nov 17 JST)

9 Upvotes

Hey folks, Trey here.

Unite Tokyo is next week, and both the keynote and the roadmap session will be streamed live on YouTube. You don't need a plane ticket to Shibuya to catch them.

Keynote

Roadmap

The time zones are a little rough for folks in the Americas. Monday evening dinner and a keynote isn't the worst combo. Both will be up on YouTube afterward, so you can always watch them later.

– Trey
  Senior Community Man @ Unity


r/Unity3D • • 1h ago

Show-Off We've just won the Best Made With Unity Award @DevGAMM! - Tempus Vitae

65 Upvotes

It's quite insane tbh.
Since I wasn't in the stage to say thanks to Unity I'll do it here: thanks Unity for everything!

Also, for anyone curious about the game itself and the behind the scenes, we did a deep dive into the engineering of it at the official Unity Livestream, which is here: https://www.youtube.com/watch?v=6_WNKyqZO_M
And if you want to help your wishlist will be very very helpful: https://store.steampowered.com/app/2360820/Tempus_Vitae/


r/Unity3D • • 1h ago

Show-Off Physics are important in gaming. Especially jiggle physics.

25 Upvotes

When we set out to make Surfpunk, we knew bikini laden characters were inevitable. To that end, we also figured boob physics were similarly inevitable. Although we realize physics might not be for everyone, from a practical animation standpoint, we did want to have nice secondary animation on our characters. We found a cloth simulation package on the Asset Store called Magic Cloth 2 and realized it could be used for more than just hair and clothing. The set-up was fairly straightforward.

This particular character is a giant siren that can be found in levels that grants powerups. Since she’s oversized, her model is more detailed than our regular characters, so the extra animation felt valuable.

Fun fact; at some point we spent like 3 months developing realistic surfing physics that no one noticed, but the breast physics took us a couple of days and garnered way more attention online.

How did we do? Too much jiggle, or not enough?


r/Unity3D • • 6h ago

Show-Off Finally got my troops and the skeletons fighting each other... 3rd person Thronefall anyone?

39 Upvotes

After allot of work on systems and combat, I finally have troops fighting each other. The end goal is a defence game, where you defend your Island from waves of attacks. This is the first real milestone on the way to that. How does it look?


r/Unity3D • • 1d ago Bravo

Show-Off Made tendrils that find their own way to any object and wrap it (Unity)

3.3k Upvotes

Been working on this for my Unity asset. You pick an object, and the tendrils crawl over to it, climb whatever's in the way, wrap it, then move on to the next one. Nothing is hand-animated.

4 styles so far: Symbiote, Ink, Cables and Vines. (Car and boxes are just test models.)

Not released yet. Would you actually use something like this? Which style do you like most?


r/Unity3D • • 5h ago

Show-Off An experiment in ocean wave simulation based on Tessendorf's FFT ocean waves. 🌊

18 Upvotes

r/Unity3D • • 21m ago

Shader Magic Multi scale scene voxelization for cascaded real time global illumination, covering both GI at large distances and in near details.

6 Upvotes

r/Unity3D • • 8h ago

Solved Tip: put your cloud shadows in the sun's light cookie, not in a screen overlay (URP)

15 Upvotes

A while ago I shared how one clip shader builds all the buildings in my game, and the comments were great, so here's another one from the same project: cloud shadows. (Clip: Venice at 5× game speed, UI hidden.)

The first version was wrong in a way that took me a while to see

It was a fullscreen pass that darkened the final image wherever a cloud was overhead. Fine in a screenshot, but it darkens *everything*: building shadows under a cloud went double-dark, the sea kept its sun glint (just greyer), and the sky light dropped too. A real cloud only blocks the direct sun.

The fix: let the sun carry the shadow

Render the clouds as seen from the sun into a small texture and assign it as the directional light's cookie. URP multiplies the cookie into the main light only, so under a cloud the direct light goes away (and with it the hard shadows and the glint) while ambient stays. Which is what happens outside.

1. The texture

512×512 R8_UNorm RenderTexture covering 2048 m in light space, so 4 m per texel. A fullscree triangle fills it every frame from a CommandBuffer.

2. One texel = one ray

Each texel is a point on the light plane. Map it to world space, slide it along the sun ray down to the ground, then march the cloud volume toward the sun:

float2 ls = (uv - 0.5) * _Rect.zw + _Rect.xy; // same mapping URP uses

float3 p = mul(_LightToWorld, float4(ls, 0, 1)).xyz;

p -= sunDir * (p.y / max(sunDir.y, 0.05)); // drop to y = 0 along the ray

float lit = exp(-CloudShadowDepth(p, camPos, sunDir));

The cookie is projected along the light direction, so one value is right for the whole ray: a roof and the street below it get the same shadow.

3. Hooking it to URP

sun.cookie = rt;

var data = sun.GetUniversalAdditionalLightData();

data.lightCookieSize = new Vector2(2048, 2048);

data.lightCookieOffset = snappedCenter;

URP looks it up as uv = (light-space position - offset) / size + 0.5. Your shader has to use exactly the same mapping, or the shadow lands shifted or mirrored.

4. Snap the offset to whole texels

The square follows the camera, but in steps of one texel (Mathf.Round(x / texel) * texel). Move it smoothly and every cloud edge shimmers while you pan.

5. Fade to lit at the border

Past the square, URP stretches the edge texel to the horizon. I fade the cookie to 1 over the last ~8% on each side: saturate((0.5 - abs(uv - 0.5)) * 12).

6. Custom shaders need one line

URP/Lit picks the cookie up on its own (30k+ renderers in one city scene, zero changes). My own shaders, water included, needed

#pragma multi_compile_fragment _ _LIGHT_COOKIES

GetMainLight(shadowCoord, positionWS, shadowMask) then applies it for you; where I build the light by

hand it's mainLight.color *= SampleMainLightCookie(positionWS). The sun glint on the water now

switches off under a cloud by itself.

Gotchas

  • My helper GameObjects used HideFlags.HideAndDontSave and survived exiting Play mode: after four Plays I had four copies, each holding live RenderTextures. HideInHierarchy plus DestroyImmediate in OnDestroy fixed it.
  • I kept the old overlay for edit mode (the cookie only runs in Play, and editor captures still need clouds). A static flag turns the overlay off whenever the cookie is active, otherwise you get both and the shadows are twice as dark.
  • Cost: 512² is about 262k samples a frame, half of what the old half-resolution pass did at 1080p. I haven't profiled it in milliseconds yet.

It's from FONDACO, a merchant strategy game set in the Mediterranean of 1400 that I'm making solo.

One thing I haven't solved: with a low sun I clamp sunDir.y at 0.05 and the shadows get very long near sunset. How do you handle cloud shadows when the sun is low?


r/Unity3D • • 1d ago

Game This is Tiny Fishing, a mixed reality game created in less then 2 months for a VR Dev Competition. Would you play it?

195 Upvotes

r/Unity3D • • 1h ago

Game making my first story driven horror game I'd love your feedback!

2 Upvotes

Hello everyone! I’m 13 years old and joining from Turkey. I’ve been interested in programming and technology for a long time. I have an intermediate level understanding of C++ and C#, some experience with Unity, and I also know how to use Blender.

I’ve been involved with electronics for about 3 years ever since I was 10In fact, I recently designed my own development board based on the ATmega328P. It’s currently on its way; once it arrives, I’ll likely make a video about it.

Anyway, I’ve set a new goal for myself: I plan to develop a story-driven horror game using Unity. I would love to hear your thoughts on the story

I’ve been trying to come up with a name for the game for the past three days, but I haven’t reached a decision yet.

Our main character is 36 year old Tahir Acar, who has a very dark past. He used to work for a criminal organization and is known for being ruthless, aggressive, and merciless. He has killed hundreds of people and made everyone around him fear him. However, he has another side: he never harms the vulnerable the very thought of hurting a child would never even cross his mind. He is also a devoted father to his 8 year old daughter, Nehir; there is nothing he wouldn’t do for her. (Nehir’s mother passed away while giving birth to her.)

The game begins on an ordinary morning at their home. We spend some time with Tahir and Nehir, observing their daily interactions and the nature of their relationship. While Nehir is a talkative, curious, and cheerful child, Tahir is generally cold and serious toward everyone else. His daughter, Nehir, is almost the only person capable of making him smile.

However, these peaceful mornings do not last long.

Tahir’s former accomplices track him down. The ensuing confrontation escalates into a violent clash, during which Nehir loses her life. This event changes Tahir completely; all that remains is rage and a burning desire for revenge. In his search for those responsible, he arrives near an abandoned village that was once submerged by the waters of a dam. As the water level recedes, the forgotten village gradually emerges from the depths and this is where things take a terrifying turn.

People begin to disappear, strange sounds emanate from the abandoned houses, and something in the village is capable of mimicking human voices even the voices of people who died long ago.

At one point, Tahir hears Nehir calling out to him from inside an abandoned house.

Even though he knows Nehir is no longer alive, a part of him desperately longs to believe that it is truly her.

As the story unfolds, Tahir encounters other survivors among them a woman named Suna, whose family was completely wiped out by the very same criminal organization Tahir was once a part of. Tahir gradually discovers that his own past is linked to the horrific events taking place in the village.

The narrative explores themes such as revenge, guilt, survival, loss, and the consequences of our actions. I want Tahir to be a morally complex character; while he is capable of being ruthless and frightening, there is also a good side to him one that players will discover over time. My primary goal is for players to form a genuine connection with Tahir. I don’t want him to feel like just another run of the mill video game character; I want players to understand him, value him, and truly feel something when he suffers.

Since I am developing the game entirely on my own, I plan for it to be a relatively short experience, lasting about two hours. I also aim to keep the game world and its mechanics at a scale that is manageable for a single developer.

Another challenge I’m currently facing is that my computer isn’t powerful enough to compile the game properly; however, I’ll work with the resources I have and see how far I can get.

The project is still in its early conceptual stage, so I would love to hear your thoughts. Do you think this story has potential? What would you change or improve?

Thanks for reading(I translated this using Google Translate; please excuse any linguistic errors.)


r/Unity3D • • 4h ago

Question Any good YouTube channels that show full 3D level design / environment creation in Unity?

3 Upvotes

r/Unity3D • • 2h ago

Show-Off I created a Grass Cutter game! You can use this too for your project!

2 Upvotes

r/Unity3D • • 6h ago

Game I picked my mixed reality tower defense back up for a hackathon, would you play something like this?

4 Upvotes

Hey everyone! Some of you might remember Portal Defense from a post I shared here a while back. It’s now called Pocket Havoc, and I’ve picked the project back up for the Meta VR Start Developer Competition!

Having a deadline gave me the push to get things moving again. I’m building it solo as my first game, under my little indie studio, Pulsar Studio.

The idea is simple: turn your room into a battlefield. Grab turrets from a floating arsenal, throw them into position, and defend a tiny planet against enemies coming through portals. All with hand tracking on Quest 3 / 3S, with destructible walls and a few powers for when things get out of hand.

I want to make a slightly unconventional tower defense, playful and chaotic. Weird powers, over-the-top destruction, and moments where you look around your room and think, “WTF is happening?” There’s a lot of room to experiment, and that’s the part I’m most excited about.

I’d really love to take this beyond a competition prototype. I’m hoping to find enough people interested in playing it to keep developing it towards a public demo or an early access release.

The response to my earlier post was really encouraging. A huge thank you to everyone who shared feedback back then, means a lot and made me want to take the project further.

Could you see yourself playing this? And during the waves, would you prefer to focus on deploying turrets and watching your strategy unfold, or regularly jump into the fight yourself with powers?

If you’d like to follow along, share ideas, or just chat about the game:

Discord: https://discord.gg/zpx7JvQyzZ

More about the project and where I’d like to take it:

Devpost: https://devpost.com/software/pocket-havoc-xr-tower-defense

This is a short gameplay preview, you can watch the full trailer here: https://youtu.be/k__LWPbc-AI


r/Unity3D • • 8h ago

Show-Off Small scene I made, hoping for better days in the industry !

Post image
5 Upvotes

r/Unity3D • • 1h ago

Show-Off Ten years on: bringing Amplify Bloom to URP

1 Upvotes

Amplify Bloom turned ten, which felt like the right moment to finally do what people have been asking for since the day URP appeared: a proper URP version (HDRP is next). A decade is a long time for an effect to stay in people's projects, and we wanted to mark it by bringing it forward rather than leaving it behind. The original Built-in version stays free and open on GitHub under MIT, so you can dig through it or learn from it.

What it was always about

Bloom has a quiet flaw. It's great at making flicker visible. A one-pixel shimmer on a specular glint gets spread into a big glow that pops on and off. Amplify's answer is to filter carefully at every stage, so a single hot pixel never gets to dominate.

It starts at the threshold: a soft knee that preserves hue and caps runaway specular values before they enter the chain. The first downsample is a wide 13-tap filter that weights each group of samples by its brightness (a Karis-style average), so one firefly can't outvote its neighbours. Each mip then gets its own Gaussian blur, and the chain is recombined with a tent filter rather than plain bilinear upsampling.

On top of that sits an optional(but highly recommended) dedicated temporal filter, enabled per camera. It blends the first bloom mip with its own previous frame, and every lower mip is built from that result, so the whole glow settles. It doesn't reproject, so it can trail on fast-moving highlights; that's why it's a choice and not a default. Between the two, you get a stable image without having to strip the highlights off your materials.

Everything else is switched on individually, so you only pay for what you use. Lens dirt, starburst, lens flare and glare each have their own intensity, and zero means off: their passes are skipped and the final composite drops their texture samples. Bokeh is a toggle, masking is a texture slot, and blur is controlled per mip. Flare and glare are built from the filtered bloom chain, and dirt and starburst from the combined mips, so they inherit its stability. That matters on low-end devices and VR.

Starting over, ten years later

The old BiRP version was one big camera component that grabbed the finished frame, ran a shader over it and handed it back. URP does things differently enough that we had to rebuild. We split the code into an engine that holds the bloom logic and a thin URP layer on top. That split is also what lets HDRP reuse the core.

What we found

  • Render Graph: Unity 6 plans the whole frame up front. We support it, plus the older compatibility path, from one source file. Both run the same bloom recipe; only the wrapper around it differs.
  • Volumes: The default blending broke on our parameters, especially Scatter, which has an "off" state you can't blend through. So we wrote custom parameter types: Scatter switches over like a bool when either side is off, and each mip's blur steps, radius and weight blend as one value.
  • Cameras: Each camera gets its own engine and its own temporal history, and cameras vanish without warning. We clean up stale state whenever a new one appears.
  • Missing setup: URP doesn't add renderer features on import, and a missing one looks exactly like a broken effect. Our inspectors now warn about it, by re-reading the pipeline asset's serialized renderer list twice a second. It isn't elegant, but it works.
  • Masking: The effect takes a mask texture that is multiplied in before the threshold. What once needed a second camera to fill that texture is now a sample you can copy: a component on the camera, an opt-in component on objects, and a small pass that draws only those objects, depth-tested against the scene.

It supports 2022.3 LTS and up, with a handful of version #if blocks to prove it.

What still bothers us

Setup is three pieces (a renderer feature, a volume override and an optional per-camera component), which takes more explaining than one component. Keeping Render Graph and the compatibility path behaving identically is our biggest regression risk. Excluding a single camera still means giving it its own renderer.

What's next

HDRP is up, and it's a different challenge: where your effect sits in the post-process list decides whether you're still in HDR. We'll write that up when it's further along.

Ten years in, we'd like to hear from you. If you're still working in BiRP, we hope Amplify Bloom has served you well over the years. Some great games shipped with it, some we probably will never know they used it.

We hope you enjoyed this "short" behind-the-scenes view of our bloom work, we didn't want to make this sort of "postmortem" too long so feel free to ask any questions you might have.

What do you think?

Is custom post-processing for URP and HDRP as painful to maintain as it felt to us?

How do you handle per-camera state? Has anyone found a clean way to detect a missing renderer feature without reading serialized internals?

What would you want from a bloom replacement that the built-in one doesn't give you?


r/Unity3D • • 5h ago

Show-Off I made a pixel-art VFX generator, and the sprite sheets work in Unity's particle system too

Thumbnail
jankybydesign.itch.io
2 Upvotes

Hey everyone! I'm a Games Art student who makes small tools for indie devs, and PixelBurst FX is my latest one.

It generates pixel-art effects and exports them as sprite sheets or GIFs, ready to use in your game. The export window also shows you the Unity slicing settings, so there's no guesswork when you bring them in.

There's a demo if you want to try it first. It exports watermarked GIFs, and sprite sheet export is in the full version.

https://jankybydesign.itch.io/pixelburst-fx

What effects would you want to see added next?


r/Unity3D • • 3h ago

Game A little space pirate trouble in my puzzle game

Post image
1 Upvotes

r/Unity3D • • 9h ago

Game CO-OP Bartending Roguelike in Unity

3 Upvotes

Bartend With Your Friends - Online 1-4 player co-op robot-bartender roguelike full of physics-driven chaos. Work together to mix drinks, manage demanding customers, and pick upgrades to hit the bar's daily quota before your shift ends - or the bar shuts down for good.

Feel free to ask any questions


r/Unity3D • • 14h ago

Show-Off A little VR Project of Mine!

7 Upvotes

Week 3-4 of development and I finally settled on the name 'DamnedVR' for my COD Zombies inspired physics survival game!

Obviously it's still very early and super buggy, but it's finally starting to become fun to play! 😁 Lmk what you guys think!

I'll probably be be taking a break from development for at least a week or two to consume GTA, and then it's back to 10 to 13 hours a day in the unity editor 🥀

Ignore the instances where I tried to shoot the gun and it just wouldn't fire, that's not an issue with the game.. the quest 3 recording icon has an overlay that goes over my screen in the headset view and it detects that I'm pointing at it rather than letting me shoot my gun.. really annoying.


r/Unity3D • • 11h ago

Question Is it normal to use simpler collider shapes than the visual mesh?

4 Upvotes

I'm having some trouble solving collider standards, such as which collider to place on a particular mesh in terms of player movement + collision and what works best and more smoothly.

In the image, I have a cluster of capsule objects just to test my player collision. I noticed that when I jump on top of these capsules, my player jitters and behaves a bit weird, but it's an edge case. When I switch the collider to a cylinder, it seems to have removed every issue, and my player doesn't float too much. In the top part of the image, my player on Call of Duty is floating so far away from this boulder. I'm assuming there's a huge box collider covering the entire rock? But visually even in LAN it looks very bad because the player is nowhere near the rock and is standing mid air.

Is this a normal approach? Could I do this with rocks, and other objects? Because, some terrain objects are very sharp and pointy the player can get caught on those edges (rarely) so could I just add several colliders to one object, position them on "bad" parts of it, and then I could save that as a prefab, and place it a bunch of times in the scene or something like that.

Are there any good examples of this? And how would realism be balanced in terms of floating above a mesh versus having good, smooth movement?


r/Unity3D • • 13h ago

Game Any dinosaurs fans here? Our tiny team is making DINOVER, a 2D pixel art survival sandbox.

5 Upvotes

Hey! We’re a tiny team making DINOVER.

We just put up our Steam page and wanted to share a couple of shots from the game.

It’s a 2D pixel art survival sandbox where you play as a young tribe member trying to pass your clan’s trials. You’ll explore jungles and caves, dig for ore, build, and make better tools and weapons as you go. There are some pretty big boss fights, too.

And some of the things you’ll run into out there aren’t dinosaurs at all.

If our game looks like something you’d play, we’d love it if you added it to your Steam wishlist <3


r/Unity3D • • 9h ago

Show-Off my procedural planet project, still a prototype. thoughts?

2 Upvotes

r/Unity3D • • 11h ago

Show-Off Creating Shorelines and Shore Foam for Stylized Toon Water

3 Upvotes