r/Blacksmith • • Dec 30 '25

Current Bot Invasion

Post image
33 Upvotes

r/Blacksmith • • 20h ago

Made this yesterday

786 Upvotes

r/Blacksmith • • 13h ago

Well, looks like my wallet may be in trouble...(took a bladesmithing class)

Post image
129 Upvotes

r/Blacksmith • • 1d ago Bravo

Had a go at forging a skull from 1.5mm mild steel. What’d you think?

Thumbnail
gallery
629 Upvotes

It’s only 4 hours in so quite a lot of refining to do still. Quite a big piece at 300mm wide x 370mm tall


r/Blacksmith • • 17h ago

Knife made from file and stabilized poplar

Thumbnail
gallery
107 Upvotes

This is a 2 man project where I made a sketch and from there we got and old file forged quenched and tempered it, we also cast brass for the bolster and the end of the handle is a snail I wanted to add


r/Blacksmith • • 12h ago

Saw the tiny axe and had to post mine from a few years ago. Some other minis as well.

Thumbnail
gallery
37 Upvotes

The tiny Bowie is the only hardened/tempered one in W2 steel and is 1.61 inches long on malachite. The skewer bow is my favorite by along shot tho. Pun intended.


r/Blacksmith • • 20m ago

Help a girl out-- husband starting a forge

3 Upvotes

Hello!

Please excuse if I get any terminology wrong. My husband has been wanting to start forging for nearly over a year. We've gone to conventions, talked to our local blacksmiths, and I've gotten some great information on what he needs to start. That being said, Christmas/his birthday is around the corner and I really want to surprise him by getting the basic stuff he needs to start. I've snooped around his notes and took some of my own from the blacksmiths we've met and just wanted to make sure I'm on the right track and haven't forgotten anything major. Any advice would be so helpful! He wants to make knives and other small projects starting out.

For the anvil, one of the blacksmiths told us to look at Harbor Freight and to upgrade the equipment as he learns. I have a 65lb DOYLE cast steel in my cart.

The same blacksmith also recommended a VEVOR portable propane forge, and I'm thinking about getting a double burner unless anyone here has a better recommendation?

I'm completely lost on what type of hammers/tongs or whatever other tools he might need. Does anyone have any recommendations on what start/beginner ones that he may enjoy? I'd like to start out on a cheaper scale and that way he can upgrade once he finds out which one he enjoys.

Please tell me what else I'm missing, as I'm sure I am missing a lot of stuff. I just know he's been really wanting to do this for a long time but never willingly spends money on himself.


r/Blacksmith • • 16h ago

Rotative scales deployment knife, based on 19th century patent and adapted to fit forged elements

51 Upvotes

r/Blacksmith • • 4m ago

Mokume Lanyard

2 Upvotes

Handforged triple alloy mokume gane lanyard bead with a snake knot lanyard. I went with a brushed finish on this one.


r/Blacksmith • • 15h ago

What tools could you forge that would be useful in a bushcraft/outdoor situation?(besides a knife lol)

Post image
14 Upvotes

r/Blacksmith • • 8h ago

Finished up a knife I promised a friend.

Thumbnail gallery
2 Upvotes

r/Blacksmith • • 1d ago

What's this? An axe for ants?

102 Upvotes

r/Blacksmith • • 16h ago

Built a small gas forge from a tin can — first test firing

Post image
7 Upvotes

I'm a beginner blacksmith in Japan. I built a small gas forge from an 18L tin can, lined with ceramic blanket (about 5L inside), with a homemade venturi burner (0.8mm nozzle — worked better than 1.0mm).

Everything is knock-down: the burner sits on its own stand and just slides into the side hole, because I forge in my backyard and put everything away each time.

First test firing: the iron reached orange heat, but then the gas bottle ran out, so I still don't know if it can reach forge-welding temperature. The bottle is refilled now — the real test comes next, and I want to combine it with actual forging.

The video has no music, just work sounds.

Any advice on getting a small venturi forge like this up to welding temperature would be really appreciated.

The test-firing video is on my YouTube — the link is in my profile.


r/Blacksmith • • 23h ago

Beginner needs help

Post image
25 Upvotes

Absolute beginner here:

How do I prevent these craters while smithing and how do I get a smooth surface without grinding/polishing it?

It's pretty basic construction steel, if that's helpful.


r/Blacksmith • • 1d ago

Can I hire one of you to make this?

Post image
496 Upvotes

I've had this 3D printed joke tool on my shelf for a while and it gets a good laugh from my buddies when they come over. I want to take it to the next level and get a real metal one made.

Dunno if this kind of thing is allowed on this subreddit. Remove if it's not!


r/Blacksmith • • 9h ago

Splitting Froe question

Thumbnail reddit.com
1 Upvotes

r/Blacksmith • • 1d ago

First week of blacksmithing

Thumbnail
gallery
144 Upvotes

Refractory cement finally arrived in the mail to properly coat my forge, so I thought I'd share my "finished" setup for any other newbies looking to take the cheap way out:
Vevor Single Burner, railroad track, and a plain old 1 lb carpenter's hammer. It's been a ton of fun.

I need to make some tongs next instead of using pliers though.


r/Blacksmith • • 1d ago

Advice for a newcomer.

Post image
15 Upvotes

Hello, I'm interested in trying my hand at blacksmithing, I can build a coal forge but i don't have an anvil. I've found this listing for a railroad track piece for 27€, could I use it as an anvil to try and see if smithing is something for me? And also, other than eyepro, what is something I should get before starting?

Thanks in advance!


r/Blacksmith • • 1d ago

Do you guys like my assortment of skulls? Bottom ones are newest

Post image
34 Upvotes

I love seeing the progress and learning where I can improve :)


r/Blacksmith • • 20h ago

Question on trailer ball steel

4 Upvotes

I welcome to wise cracks about trailer balls as this would not be the trades without them,

But jokes aside, I know stainless steel isnt supposed to be thrown in the fire because of the off gassed, but it’s the perfect size and shape for making the pommel for my sword(art project, give very little shits about the quality of my materials at this stage in my practicing.)

Are there trailer balls that aren’t stainless or galvanized that I can cast into the fire, or is possible to throw a normal one in and just stand back for like an hour or whatever while it burns off the toxins? I want to be safe about this, but I don’t have the money to invest in lots of extra tools or stock steel to machine down to what I need.

If what Im trying to do with a trailer ball isn’t possible, Im ok with accepting that and looking for a work around, and suggestions are welcome, but this was the first solution I could come up with.

It is fairly frustrating to me that I have an entire book on sword smithing and it covers in detail every part and there is nothing for pommels, not anywhere in the book. The pommel is all I need, as soon as I find a safe way to drop the ball my wall hanger will be well hung.


r/Blacksmith • • 1d ago

How can I make a replacement blade like this?

Post image
2 Upvotes

I need to make a replacement blade for my PVC pipe chamfer tool. The blade that came on it snapped and there are no replacements available in the dimensions I need. The blade in the picture is for a paint scraper, but the design is exactly the same, but with smaller dimensions and the holes are in a different spot. The one pictured is 60mm x 12mm x 1mm. I need one that is 30mm x 12mm x 1 mm. If I were to buy the 60mm blades, I could cut them in half, but the holes would not be in the right spot. Drilling a new hole would be difficult since it would overlap the other.

I do not have much for tools. I don't have a bench grinder, which I'm sure would be useful if fabricating from scratch. How else can I go about this? Also, it doesn't need to be double-edged if that makes it easier to make. I live in a very small town, so all I can get is cold or hot rolled steel.

One other idea I had was finding a bracket that I could cut to size and sharpen the edges on.


r/Blacksmith • • 1d ago

Forging 304 SS?

2 Upvotes

Hi, I was curious if folks had experience with forging 304 SS? I may be coming into some sheets of 1/8" thick plate that I was curious if I could forge - more specifically forge weld to aim for a sort of stainless Damascus. I have a 16ton press and a p&id controlled forge so I should be able to keep the heat pretty consistent but wasn't sure if the material is suitable.

Thanks!


r/Blacksmith • • 1d ago

Picked up the bottom one a week ago and the top one today! Marketplace has been going off! Hay Budden 106lber and Hay Budden 175lber.

Post image
17 Upvotes

r/Blacksmith • • 1d ago

28' of texturing down, 155 still to go.

21 Upvotes

Normaly i enjoy a brute de forege finish, but for fuck sake, texturing a little under 200' of steel is going to make for a shitty few days. At least i got a power hammer this time around.