im seeing marks like this on touchpad and side body and i dont know how to describe them, does anyone know hoe to remove these and also maintain to not appear marks like these?
i am having power problems with my hp omen and my games run poorly with my CPU and GPU running at bellow 50% usage for example i am playing apex legends at the lowest settings possible at 1080p and barely getting 130FPS with a 5060 115w and a Ultra 7 255h and 32 ram dual channel , but when i do a power test in OCCT both the CPU and GPU are able to reach 100% at the same time with no errors so that indicates that there is no issues with the charger
I just found out there are third-party alternatives to Omen Gaming Hub, and the three I know of are:
OmenCore
OmenMon / OmenMon Reborn
Ohman
For those of you who have tried them, which one is the best in terms of features and effectiveness? Also, are there any other good alternatives besides the three I mentioned?
I acquired my laptop five months ago. Since the tenth day, I have noticed repeated screen freezes and black screens, which reappear even after a restart. I reached out to HP, and they advised downloading drivers from their site. However, none of the AMD drivers function correctly on my system; all trigger freezes and black screens.
After reviewing posts in the HP community, I realized the issue might relate to the AMD graphics version. I reverted to the factory version of AMD, which proved much more stable than before.
I have contacted HP too regarding this matter, they are not able to help me with this. It has been mail chain of 60 mails. I have shared all dump files, IDR logs, livekernelevents and screenshots showing repeated AMD timeouts.
I am asking you all whether I am the only one experiencing this or if anyone else faces the same problem. That would help me determine whether it might be a hardware issue rather than an AMD driver issue.
So, I got a new HP Omen 16 gaming laptop with an RTX 5060 and an Intel Core Ultra 7 255H from Croma.
Everything was fine on the first day. I had to go out of station for a day, so I didn't use the laptop. Then, on the third and fourth days, I used it and had a lot of fun playing Sekiro and other games.
However, after playing Resident Evil 3 Remake, I wiped the screen with a cotton cloth, and that's when the flickering started. I was shit-ass scared because this was quite an expensive laptop.
I tried uninstalling and reinstalling the display drivers, but nothing fixed the issue. Eventually, I told my dad about it, and we decided to take it back to Croma. They said they would file a complaint and asked us to come back on Monday since it was Saturday and the HP service team wasn't available.
I had to return to my college city because college was starting in two days, and I had a train to catch at midnight. So, I left the laptop at home, and my dad said he would take care of everything.
On Monday, the person we had spoken to wasn't available, so my dad couldn't get anything done. Today, when my dad finally went back to Croma, the laptop's keyboard had suddenly stopped working as well!
At this point, my dad told them that he wasn't going to accept this particular unit anymore and wanted a brand-new replacement instead.
Seriously, it's barely been a week, and this laptop has already developed multiple issues. I spent around ₹1.70 lakh on it, and I honestly didn't expect to deal with all this within the first few days of ownership.
Guys, I'm using hp omen laptop and found many task scheduled and many has the same names.
If I want to keep windows running properly and I also use hp omen gaming hub overlay to monitor my CPU GPU usage and temp and to control the fans, Which ones I can safely disable without compromising my gaming session.
Please don't say all 😄.
And for now I'm not planning to uninstall omen gaming hub.
My HP omen is having an unusual issue. I bought it last year and the warrenty's been over for over 2 months now. It only charges when it's shut down. If I turn it on it does not charge. I have checked and consulted many people. Nobody could identify the issue. Finally One technician told me that it's an I/O chip issue and that you have to replace the motherboard. Has anyone experienced the same issue? What should I do now?
I've recently started experiencing constant game crashes on my laptop. Some games crash almost immediately after launching, while others last a little longer, usually making it past the main menu before crashing.
Laptop specifications:
Model: HP Omen 15 (15-ek1xxx)
CPU: Intel Core i7-10750H
GPU: NVIDIA RTX 3070 Laptop GPU
Battery: Removed due to swelling (should be irrelevant since it was working fine for ages after removal)
OS: Windows 11
What happened:
I recently replaced the thermal paste with PTM7950 (CPU and GPU) and cleaned the laptop, which significantly improved my temperatures. CPU idle temperatures dropped from around 85°C to 50–60°C, and GPU temperatures also improved.
Everything was working fine after the replacement. Other games were performing well too, including Hogwarts Legacy. The last thing I remember before it all went downhill was leaving Hogwarts Legacy running AFK for about 3 hours while I was doing something else. After that, I started experiencing Hogwarts Legacy running at 5 fps and then constant crashes in almost every game.
I also installed various software updates over the past few weeks, including NVIDIA driver updates, so I'm unsure whether any of those contributed to the issue.
My laptop has been running without a battery for a while, and I was previously able to play games for hours without issues, so I don't think the missing battery is the cause.
Errors from Windows Event Viewer:
All errors are from nvlddmkm under \Device\Video7.
Event ID 153:
Error occurred on GPUID: 100
Event ID 13:
Graphics SM Warp Exception on (GPC 0, TPC 1, SM 0): Illegal Instruction Encoding
Graphics SM Global Exception on (GPC 0, TPC 1, SM 0): Multiple Warp Errors
Graphics SM Warp Exception on (GPC 4, TPC 0, SM 0): Illegal Instruction Encoding
Graphics SM Global Exception on (GPC 4, TPC 0, SM 0): Multiple Warp Errors
Graphics SM Warp Exception on (GPC 5, TPC 0, SM 0): Illegal Instruction Encoding
Graphics SM Global Exception on (GPC 5, TPC 0, SM 0): Multiple Warp Errors
I've removed the repeated errors and generic Event Viewer descriptions.
What I've tried:
Reinstalled Windows.
Checked for and repaired corrupted Windows system files.
Completely uninstalled NVIDIA drivers using DDU and reinstalled them.
Ran multiple OCCT stress tests.
Checked CPU and GPU temperatures, which are significantly better than before.
Lowered in-game graphics settings to see whether stability improves (seems to last a bit longer before crashing).
Disabled overlays and unnecessary background applications.
Current situation:
Games like Valorant and Wuthering Waves seem to run fine at low settings, but more demanding games like Satisfactory and Hogwarts Legacy crash frequently.
Satisfactory crashes most of the time in the main menu, and lowering the graphics settings seems to make it last a few more minutes, although it still crashes after 5–10 minutes. I don't think it's an issue with the games themselves because Satisfactory was running completely fine before all this, so it's the best test case I have at the moment.
OCCT stress tests generally complete without errors. I've tested combined CPU + RAM, CPU, Memory, VRAM, and 3D Adaptive tests for around 10 minutes, and they usually come back clean. Occasionally, I get a VRAM error, but I haven't been able to reproduce it consistently enough to determine whether it's related to the crashes. The individual tests generally pass without issues, which makes this even more confusing.
I do plan to open the laptop again, but I'm waiting for new thermal pads so I can replace the ones on the VRAM. However, I'm not sure why the thermal pads would suddenly be the issue, considering everything was running fine after the thermal replacement and the initial stress tests.
I also considered whether the missing battery could be contributing to the problem, but I'm not sure how likely that is. My laptop uses a 200 W power adapter, and during OCCT testing, the total power consumption I observed was around 150 W at most with the lower temps.
I'd love to hear if anyone has any suggestions or has experienced something similar. Any advice or possible solutions would be appreciated.
I can confirm successful cpu swap from the 8000-series Ryzen 7 8700F with 9000-series Ryzen 7 9700X with some caveats that one may have to live with.
My particular Omen 35L unit involved:
-65w Ryzen 7 8700F (CPU/NPU)...arguably a mid cpu but by no means a bottleneck with midlevel cards
-RTX 5060 Ti (16gb)
-32gb Fury Beasts
-3tb ssd storage
-7th gen Asetek HP Omen 240mm AIO liquid cooler
-8CF4/Wolant Motherboard (B650 AM5) with max 65w TDP
CPU swap
-65w Ryzen 7 9700X (provides increased L3 cache with the same 8-core setup as the 8700F which improves cpu-intensive game performance and a general performance gaming uplift of 18-20% as per UserBenchmark)
-tested games on average had 20-30 frame gains while gameplay remains silky smooth (my undervolted RTX 5060 Ti/16gbs can carry games no problem to begin with)
-------------------------
Steps taken:
-update to the latest bios and bios revisions F.42
-turn off and unplug from power source, unplug all cables and then press and hold power button down for half a minute
-uninstall cooling solution (wraith, fan tower or AIO) and wipe off the existing thermal paste
-unlatch the cpu bracket and gently liftoff the existing cpu to avoid damaging the pins on the motherboard
-uninstall graphics card to reach the coin/CMOS battery
-REMOVE the coin/CMOS battery for about 15 minutes...Pressing the CMOS reset button does not seem to fully disengage current settings which may result to the motherboard not recognizing the new cpu
-install the new cpu which in my case is the Ryzen 7 9700X; GENTLY and SLOWLY guide the unit down while matching where the arrow and the notches are against the slot; give it a gentle wiggle to make sure that is is seated properly before closing the bracket down and locking it in place with the latch
-when 15 minutes has passed, reinstall the coin/CMOS battery and then do the same thing with the graphics card
-apply thermal paste on the cpu's IHS surface and then reinstall cooling solution
-boot the system up and wait about 5-10 minutes for the retraining process to fully POST
-when prompted to reset TPM settings, choose yes; this will also erase and turn off your current PIN in your PC
-in the next screen, click enter to allow for CMOS reset
-in yet another screen, you can then type in your bitlocker key that you can find within you Microsoft account; it will tell you exactly which code to enter to match your PC (you will need your phone or another PC or tablet to lookup your codes in your MSFT account)
-the final screen will allow you to keep the PIN off or enable PIN again by entering your new PIN (you can use the old PIN)
-aaaaand...just wait for the system to fully boot back into Windows
-------------------------
Now, for the caveats/quirks:
-the 9700x at idle and light to moderate duty in this proprietary setup needs good cooling system and/or mildly aggressive fan curves or in case of AIO liquid coolers, substantial rpm increase to liquid flow paired with increased radiator fan curves; this may be due to the proprietary motherboard's own limitations; in-game temps remain on par with the original cpu though
-sustained temp comparison with AIO liquid system @ base/default settings:
Original 8700F temps: 25-35 celsius at idle/light load; 40's/50's at moderate; 60's-70's with intensive games
9700X temps: 40-50 celsius at idle/light load; 40's/50's at moderate; 60's-70's with intensive games
-HWiNFO64 will report PCIe error counters maxing out at 65,000-plus with multiple lane errors here and there but with good recovery count also at 65,000-plus; so far, I could not (yet) tell any notable/significant adverse performance issues meaning any long-term effects remain to be seen and unfortunately there is no way within BIOS/UEFI to switch PCIe gen options
-with the proprietary motherboard not having a native video out, the onboard graphics is essentially useless in this prebuilt setup
-------------------------
So...this 18-20% gaming upgrade...IS IT WORTH IT?
If a prospective upgrader thinks a moderate uplift as mentioned above is gonna be worth it notwithstanding the aforementioned caveats, it is safe to say that the whole process is well worth it. However, if someone becomes easily backed into a fence when stepping out of their comfort zone dealing with such undertakings resulting to some of the above quirks, I would advise to just stick with their current prebuilt setup or move on and up to building their own systems (but not in this current PC environment).
I bought an Omen 17 4080 for cheap to repair. Newly installed, freshly cleaned mobo with VRM putty and PTM on the gpu/cpu. I havn't done the heat cycles yet, but idling now at avg cpu package at 54-56c temp. Only have 16gb installed, but will add more ram later.
Got a benchmarks in. Overall score slighty below avg, graphics score (41271) slightly above average.
I've had my HP Omen 16 for about 4 years now, and in recent months, the battery has been going from 100 to near 0 in about an hour, even while using non-intensive programs on the standard GPU (not the gaming GPU)
I've been trying to find possible battery replacements, but I thought I would ask here first to see if anyone else has replaced theirs before and with what. I've looked for alternatives beyond the standard straight replacement from HP, but wanna make sure I'm getting a reliable one that will actually work for a long while.
Any recommendations for replacement batteries or specific sites to look out for would be greatly appreciated, as I've never had to do a laptop battery replacement before.
Bought an omen Ryzen 9 rtx 5070 laptop around 3 weeks back, till when I'm eligible for warranty extension. Any chances of offers in December like a black friday sale or anything like that?
I have on bought this year. It has a 5090, 64GB of DDR5 6000 and the Intel 265K (meh)
I get a bunch of random errors like bluetooth disappearing, my file system hanging during transfers, and other things that a computer like this should never experience. I want to keep the case of course and swap out the motherboard. But I'm just wondering if anyone has succeeded in swapping out the motherboard or if there are proprietary things like power connectors, fan connectors, rgb connectors (and even things like motherboard size/fit for PCI Slots
Buenas, estoy pensando meter otro SSD en mi omen 45L, el slot de m.2 está al lado del conector de la gráfica 5080, por lo que hay que sacarla para ponerlo. Mi duda es si alguien ya ha instalado un m.2 en este pc y que disipador ha comprado para que no choque contra la gráfica. Había pensado en un be quiet mc1 pro, pero no sé si será demasiado grande.
I recently upgraded my PC. I gave my old HP Omen Obelisk to a friend. I carefully connect everything. I try to turn it on by pressing the button, but it won't turn on. I've unplugged the RAM and graphics card. I've checked the thermal paste, but nothing. It's absurd. I wanted to try replacing the power supply, but the cables are running under the chassis. Impossible to move.