r/Plumbing • • Sep 08 '23

Read the rules before posting or commenting!

440 Upvotes

Due to a large influx of people not reading the rules and how small of a Mod team we are this is here to serve as the only reminder of the rules. Just to be clear asking or commenting about prices is a permanent ban, the internet is not the place to judge if prices are "fair".

Rules are available on the sidebar.


r/Plumbing • • Dec 22 '22

FROZEN PIPES MEGATHREAD

167 Upvotes

Please post any questions you have regarding frozen lines here. All other new posts will be removed from the main feed and directed here.


r/Plumbing • • 21m ago

Guy turned down my low end offer. He thought he was getting a better deal. It got red tagged.

Thumbnail
gallery
• Upvotes

Just a little more pipe dope on that union. Somehow he made the pre-installed pilot tubing leak.


r/Plumbing • • 4h ago

I received this Ridgid faucet installer as a test tool in '06 or '07, before it was released. It's heavily used and still going strong.

Post image
33 Upvotes

Absolutely love this tool and will be upset when it breaks.


r/Plumbing • • 7h ago

How critical is it to meet this requirement that the wall drain be at least 24" above the bottom of the washer?

Post image
33 Upvotes

Just got a new LG 4.5 cf front load washer (model WM4000HWA). Didn't buy the pedestals because they were out of stock and figured we'd see how it goes without. Well, I'm not thrilled with how low the washer & dryer are. However, the manual says the wall drain must be a minimum of 24" above the bottom of the washer. Ours is 35" up from the floor, leaving 11" to raise the washer. The LG pedestals are 13.7" tall according to the product specs online. That means there would only be about 21.3" from the bottom of the washer to the top of the drain pipe. I'm considering building my own that would be shorter to keep that minimum distance, but am curious if it's necessary and worth the hassle. What is the reason for that minimum distance? Would being short 2-3 inches cause issues?


r/Plumbing • • 39m ago

Well filter question

• Upvotes

Hello, I’m new to having a well we bought a new build house back in December with the well being drilled then. I’m having to change my filters every couple weeks at Most due to the water pressure will drop until I change it. When I change it, it always has this orange floating things in it and some black looking sand. Can anyone tell me what this is and if it’s normal to still be having this after a year and after changing the filter every couple weeks.


r/Plumbing • • 1d ago

Should I hire it out or fix it myself?

Thumbnail
gallery
141 Upvotes

I consider myself pretty handy. I re-plumbed my entire house myself with PEX. No issues or leaks from that for 2 years now.

But there’s something about replacing this corroded elbow section that makes me nervous. This is before my main shutoff, so I’d have to call the city to shut off my water at the street. There is a very small dripping leak coming from the elbow. The incoming line appears to be galvanized steel.

Should I be concerned about fixing it myself?


r/Plumbing • • 2h ago

What is this

Thumbnail
gallery
2 Upvotes

What is the name of this plug thing in the sink and how do I remove it? Keeps clogging and draino isn’t working.


r/Plumbing • • 3h ago

Can I get this drain flush with floor?

Thumbnail
gallery
2 Upvotes

I'm replacing a bath tub and this drain is 6 inches above the floor. The new pan requires it to be flush. If I lower the drain to floor level, the p-trap would be below the main line. I'm guessing that is an issue? If so, how would you go about plumbing this?


r/Plumbing • • 15m ago

Linear shower drain installation?

Thumbnail
gallery
• Upvotes

Hi all! We just moved into a house and this piece of mesh is sitting over the linear, wall-adjacent shower drain. Does anyone have experience with this? How do we move forward with installing a proper drain? What would the process look like? Thank you in advance.


r/Plumbing • • 16m ago

Better way to (or ideas) to improve dryer duct

Post image
• Upvotes

Is there a better way to run the flexible duct? I was not able to run it behind the wall because behind the drywall there is a weird combination of a corner post/2x stud/T intersection. (I have a photo) if needed.

I’m just wondering if there’s a way to flush the dryer as close as possible to the wall since after this is setup cabinets Will be installed.


r/Plumbing • • 16m ago

Can Somebody Tell me what I’m looking at here?

Thumbnail
gallery
• Upvotes

The spot where the pipe goes down into is solid concrete.


r/Plumbing • • 23m ago

Tapping noise from pipes

• Upvotes

Almost every single night around 12am to sometimes 7am I hear a tapping noise in my bedroom and in the bathroom beside my bedroom. My bedroom is directly over where the main comes into under the crawl space of my house but generally the tapping noise is louder in the bathroom until I open the cold water side on my sink then it’ll stop for a while. Any ideas on what it could be?


r/Plumbing • • 1h ago

Does this look right?

Post image
• Upvotes

The white plastic drain sits above where the cast iron drain starts. Is that ok?

Im assuming not and itll collect water and bacteria. Been like this since its built in 1987.

If not what do i do? Fill in with grout?


r/Plumbing • • 1h ago

What kind of connection is this? Lead Joint?

• Upvotes

I've got this galvanized pipe coming from my kitchen into what I think is a cast iron bell before it goes under my slab and to the curb. It hasn't failed (yet). Lets just say this Galvanized pipe rots or breaks off the rest of the way, is there a fitting or method for me to attach PVC to this Cast Iron housing?


r/Plumbing • • 7h ago

What is this loop for?

Post image
3 Upvotes

All of this is on an island underneath the sink, there is a loop that comes out of the wall, and goes back down, what is this for typically?


r/Plumbing • • 20h ago

Daughter flushed toilet and it was clogged. She flushed again and water overflowed.

Thumbnail
gallery
29 Upvotes

To flushes and water went down. I used a plunger and wipe/tag came up. Tag is attached. My husband and I didn’t purchase bottle cleaner. Judging by the shape of the tag it was flushed not too long ago.

We live in a four story townhome, bathroom is on the third floor. Do we share plumbing with our neighbors? Townhomes are attached. Sorry if this is a silly question. No clue this wipe/tag got in our pipes.


r/Plumbing • • 8h ago

Leaky outdoor faucet

Post image
3 Upvotes

Plumbers of Reddit!

This faucet has a slow drip which I’d like to resolve before we get hit by a deep freeze here in Kentucky. The drip comes from the opening and drips no matter how hard I try to tighten the handle. Any advice would be much appreciated!


r/Plumbing • • 2h ago

Should I replace or just repair?

1 Upvotes

I have polybutylene water entry pipes under part of my crawl space. The rest of the pipes have been replaced previously. Right now there are 2 leaks in the polybutylene piping and I can either repair what’s leaking or replace all the polybutylene left. With their bad history, which one do you guys recommend I do?


r/Plumbing • • 2h ago

Sticky Toilet Handle -Help?

Post image
1 Upvotes

Lately for the past few months, my toilet handle has been stuck after flushing, causing copious amounts of water being wasted. I removed the handle and I was wondering do these need to be lubricated? If so, how do I remove the screw? Are the screws clockwise or counterclockwise? Or should I just replace the whole unit?


r/Plumbing • • 8h ago

Trying to Change the faucet and having a hell of a time getting the plastic bolt off. Any ideas, tips, or special tools I can get to use to make it come off easier? Previous plumber had to have tightened it as tight as humanly possible. Thank you

Thumbnail
gallery
3 Upvotes

r/Plumbing • • 2h ago

Weak flush with pressure-assisted toilet

Post image
1 Upvotes

I live in an apartment building, and the landlord recently had his "handymen" install new toilets in all the units. Right away it was obvious that our new toilet had a weaker flush than the old one.

The the brand/model numbers are:

* Niagara 7714 (tank)

* Niagara 7717 (bowl)

I think I have discovered the problem, and I want to confirm my suspicions with some actual plumbers:

As with most pressure-assisted toilets, there is an air channel between the trapway and the tank, and there is a gasket between the tank and the bowl. It seems that the gasket is not fully pressed between the bowl and the tank, as you can see in the picture. So therefore the air channel is not airtight, and the "pressure assist" is non-functional.

The manufacturer specifies a 12" rough-in distance, but I measured and there is a ~10.75-11" distance from the wall to the bolt caps. The tank is directly touching the wall, so the tank cannot sit in its proper position, preventing the gasket from properly sealing the air channel.

Am I correct in thinking this is the problem? Do I need to tell my landlord to install a toilet with a 10" rough-in?


r/Plumbing • • 2h ago

Pouring water down the hole of doom and despair?

Thumbnail
gallery
1 Upvotes

Hi all, I just have a quick question. Landlords came by today and looked over are whole place. As to be expected, they were being chud. However, they mentioned someone interesting about remembering to pour water into the boiler. I remember them saying that when we first moved in, but I also remember my realtor being confused as to about where the place to pour the water is, so I just kinda forgot about it.

I researched this boiler afterwards and everything I read says there isn’t a specific hole to pour fresh water down, and that’s when me and me roommates realized there was only one real hole to actively pour water down into. The 3 piped hole of doom and despair.

Now, I am unsure if our realtor simply got it mixed up with a different apartment this building , we don’t understand how this boiler works, or there is magic down there into those pipes for that boiler. I’d greatly appreciate any help as while my instincts tell me to NOT pour water down there, but maybe I’m just ignorant and don’t understand how a boiler works. Thank you for your time.


r/Plumbing • • 2h ago

Help with hot water not shutting off.

0 Upvotes

I replaced the hot cartridge, gasket, and spring on a delta shower faucet. It worked for a week then stopped working again. I replaced it all again and again it worked for a week then stopped working. I don’t know what I’m doing wrong.


r/Plumbing • • 6h ago

Outdoor hose faucet dripping - not sure of best fix

2 Upvotes

I have a drip on an outdoor faucet that sits on a 2' copper pipe riser that is away from my house wall, about 2' away from the wall. The drip is somewhere between 50 - 100 gallons per month, pretty slow. The water doesn't collect, it drains away.

I can replace the valve and this would stop the leak. But that has me thinking that maybe the leak is helping with freeze-resistance. Insulating the copper riser got me down a rabbit hole - I started out thinking I'd use foam pipe-wrap, then ChatGPT tells me to install a frost-free yard-hydrant.

Where I live we have a few occasional nights below freezing and a hard freeze that lasts for a few days maybe once every 2-3 years. I know this pipe has survived a few hard freezes in the 25 years I've lived here.

I'm not going to run power to connect active heating pipe wrap.

So, should I -

  1. Let it drip until / unless the drip gets worse

  2. Replace the valve and leave it at that

  3. Replace the valve and use pipe foam insulation

  4. Option 3 plus an enclosure for the riser

  5. Full on frost free self-draining hydrant

  6. Something else?

I'm not sure if the drip has been protecting me all this time and just fixing it will give me a burst pipe the next time we have a hard freeze.