r/SoundSystem • u/Icy-Acanthaceae9720 • 1h ago
Our new Paraflex stack.
4x C2E Silver Formula (Ex Sinai) loaded with B&C 18DS115 using 18” adapters.
4x Trapezoid C2D loaded with 15” volts
2x Martin Audio W8C
Powered by MC2!
r/SoundSystem • u/miserlou • May 06 '20
This is a sub for the technical side of "Soundsystem Culture" - big, loud speaker boxes, often hand-built, in the dub-reggae tradition. Stuff that looks like this. Or this.
If you're looking for advice on home audio/theater systems, please try asking at /r/BudgetAudiophile, /r/Audiophile or /r/HomeTheater. Car Audio questions go to /r/CarAV.
Discussion about music should go here: https://www.reddit.com/r/SoundSystem/comments/ge9sov/official_rsoundsystem_music_thread/
Thank you!
r/SoundSystem • u/djscsi • Oct 11 '26
This sub was created on October 11, 2011 when reddit (and the internet I suppose) was a very different place. This sub seems mostly the same as it's ever been though.
Just wanted to say thanks to everyone who's contributed for all the photos and stories over the years.
cheers-
r/SoundSystem • u/Icy-Acanthaceae9720 • 1h ago
4x C2E Silver Formula (Ex Sinai) loaded with B&C 18DS115 using 18” adapters.
4x Trapezoid C2D loaded with 15” volts
2x Martin Audio W8C
Powered by MC2!
r/SoundSystem • u/ooMrQueenoo • 7h ago
Have you guys filmed or know of someone who documented the entiere process of sound system comming to life and put it up somewhere on the internet for others to watch/read?
Thanks a lot for all inputs:)
r/SoundSystem • u/Any-Selection-6773 • 2h ago
Hello! Does anyone have information about these boxes?
r/SoundSystem • u/Ok-Read-156 • 47m ago
Enceinte introuvable sur Google est ce sue quelqu un l a déjà vu ou en a carrément un car elle est inconnue sur toutes les sites
r/SoundSystem • u/Diligent-Tea8613 • 6h ago
Hello all! I’m looking at getting into sound systems as a complete newbie. I know nothing. I currently have a budget of around £2000 but will look to expand the system in the future. It will be used to host small parties with friends and friends of friends of up to about 30 people.
The main genre I play is Bassline and hardbounce so will ideally need to be fairly punchy as opposed to a more deep sounding bass.
Got any tips or resources that I can use? Would it be best to DIY it or not. With my budget I’ll have to purchase used parts.
r/SoundSystem • u/mariekondo13 • 7h ago
Hi, I have a small soundsystem composed of:
-EV sh1502er
-15" scoop
-t-amp E800
-t-tracks dsp 206
The current setup is both the volume knobs of the t-amp are all the way up and the dsp has a limiter on the mid top channel (since the EV handles 250w RMS)
The issue is that even if I turn the signal source full volume (from the console and the mixer) and the mixer LED shows peaks of +1Db, the LEDs on the dsp only light up on peaks and only at -30Db.
Also the T-amp's LEDs only light rarely on peaks.
My guess was that I had some sort of limiter or gain reduction on the dsp, but I checked and it doesn't seem so.
Has anyone else had this problem?
Is this something to do with the mixer?
r/SoundSystem • u/TwoDropsThisTime • 22h ago
It's been one month since I "completed" my first build of JMODs + SKRAMs (still lots of work to do). Haven't even thrown a proper party with them yet and I'm already dreaming of what to build next.
I am 100% going to build a pair of SAWMODs next. I want a pair of these for a multitude of reasons, one being for indoor house parties or very small gatherings.
A SKRAM is usually going to be too big to haul around for this type of thing.
What would you recommend as a smaller, more manageable sub to pair with SAWMODs for this type of thing? From my naive perspective, I assume a single 18" enclosure would be nice, but I'm really not sure.
Would greatly appreciate any recommendations here.
r/SoundSystem • u/KainoVaii • 1d ago
Pour ceux qui avaient vu passer mon premier post, le système a un peu bougé depuis :
J'ai regroupé toutes les specs et l'avancement du projet au propre ici :https://kainovaii.github.io/kicknode6tem/
r/SoundSystem • u/little_lichen_sound • 20h ago
With the recent influx of vibe-coded DSP control apps I'm curious - has anyone seen one for Hypex Fusion amps? I couldn't find anything googling around, but sometimes search doesn't work great for random GitHub repos etc.
Hypex only publishes their control app for Windows machines. Looks like it's possible to use Parallels to run it on a Mac but want to check if something better/easier exists before jumping through those hoops.
r/SoundSystem • u/coax_k • 1d ago
Generator gig coming up. The venue has asked what we need. Rather than quote amp spec sheets, we put the whole rig through one plug-in power meter and walked it up from nothing to the limiters. The video is of the top end: a couple of minutes of the mix playing, REW SPL meter in the corner running approx 108-115 dB, and the ATORCH meter live alongside it.
Gear
Method
Idle (amps on, outputs muted)
| What's on | V | A | W | PF |
|---|---|---|---|---|
| nothing | 244.3 | 0 | 0 | - |
| laptop + Shures + Server-IO | 243.4 | 1.04 | 110 | 0.44* |
| + HF amp (BG2.6) | 243.3 | 1.17 | ~134 | 0.47 |
| + tops amp (FP clone) | 244.6 | 1.64 | ~248 | 0.62 |
| + sub amp (FP clone) | 243.5 | 2.20 | ~353 | 0.66 |
*The first PF is calculated (W / V×A); the rest are read off the meter. Per amp at idle: HF ~24 W, tops FP ~114 W, sub FP ~105 W. PF climbs as the load grows. The electronics alone sit at 0.44.
Playing (DSP -Level In -20dB and Level Out 0dB- and amp gains fixed, only the laptop playback volume is raised)
| SPL (C, Slow) | Leq (Z) | V | A | W |
|---|---|---|---|---|
| 93.7 dB | 82.6 | 242.7 | 2.24 | 356 |
| 108.4 dB | 94.4 | 242.6 | 2.46 | 395 |
| 113.7 dB | 100.7 | 241.8 | 2.99 | 491 |
At the top step the HF limiter was sitting at threshold (0.9 dB under). That's the ceiling for this rig as it stands. The whole rig drew 3.0 A / ~490 W at its limiter ceiling. Voltage sagged only ~2.5 V from the no-load reading.
What was surprising
What this doesn't tell us (honest limits)
So: what should we be asking the venue for, generator wise?
The measured ceiling is ~490 W / ~720 VA (on this specific material which is generally representative of what will be played), but the inrush and the sub amp's ceiling are both unknowns. For crew who run off generators on the regular:
r/SoundSystem • u/RollingMeteors • 1d ago
From r/dancefloors: Source: https://www.youtube.com/watch?v=9jFLrLQ0-cI
¿Is anyone familiar with this Phase On design?
¿What happened to it?
Last Richard Long soundsystem is in a bumper car place on Cony Island.
r/SoundSystem • u/neilt001 • 2d ago
Just built a second X1 (middle top in the pics) for the rig. So much better having a second one so they couple and reinforce each other. The system is sounding insane. The first rave with new sub is in a few weeks so looking forward to hearing what it can do playing techno.
And how do you like my fancy spinning logo plates which have tiny rubber o-rings on either side so you can turn them depending on how the X1 is oriented/stacked? (The logo also denotes the deeper/larger bass chamber so you know which mouths to couple together).
(Next on the build list is two more MHBs and also gonna get a few MC2 Delta 50 amps, and add a distro).
r/SoundSystem • u/Jumpy-Machine-8391 • 1d ago
I recently pulled the trigger on a mobile
setup for high-end weddings in and around Cape Town. Majority of these weddings are on wine farms with a mix case of indoor and outdoor setups.
My current rig consists of:
2x Bassboss DV12s
2x QSC CB10s
1x Rane System One Controller
1x A&H CQ18T mixer
2x Phenyx Pro Dual Microphone System PTAU-2
Etc
Im in the market for subs to pair with my DV12s. I was looking at 2x BB15s which hit hard and are easy enough to carry around for one person OR I start with 1x VS21 with the option to buy a second one later on which is 80kgs and takes up a lot of space.
Does anyone have a similar setup? Are 2x BB15s strong enough to keep up with 2x dv12s? Are they powerful enough to throw outdoors? Ive read mixed reviews and have been advised by the local distributor to get the VS21. Also that the BB15s move around when played at high volume.
The cost to import the BB15s is not cheap. So looking for best options for a business Im wanting to grow.
I want a Bassboss rig so not really interested in other brands but if you have recommendations, please say so. For example for the price of 2x BB15s I can buy 4x RCF 15ax subs…
r/SoundSystem • u/jack-frames • 2d ago
hey sound system enthusiasts!
I have a small 3-way speaker stack and would like to add a fourth way dedicated to kick bass.
Do you have any recommendations for suitable speakers or cabinets to use for this? I’m very open to DIY suggestions, ideally with speaker plans if available.
I’m also happy to hear recommendations for individual drivers.
I have a 5-way preamp with an integrated DSP, so the crossover and tuning shouldn’t be an issue.
Thanks in advance for your help!
r/SoundSystem • u/Ok-Bridge5820 • 1d ago
I'm building a speaker cabinet with a dual speakON (NL4-style) panel mount in a dish plate. Left connector is the input, right connector should become a parallel link-out for daisy-chaining a second cabinet.
Current situation:
Single driver, wired to pins 1+ / 1- of the input connector (with crimped push-on terminals, no soldering on the connector)
Pins 2+ / 2- of the input are still free
Output connector is completely unwired
How should I wire it to get the speaker going and use the right port as a link out?
r/SoundSystem • u/NefariousnessLow6177 • 2d ago
Hey there,
I'm looking for a Power amp that could handle my whole system without occupying too much space. Right now I use two Crown XLS amps plus a DSP and the size of the rack is just a bit of an inconvenience. I would say that size sound quality and integrated DSP are priorities. The system is two tops rated for 150W AES each and one sub rated for 1100W AES. I was thinking about either an used Mc2 Delta 80 DSP or a Lab Gruppen IPX 1200 for the tops + a IPX 4800 for the subs. Any opinions? maybe a Powersoft T604A? Any input would be much appreciated =)
Thanks!
r/SoundSystem • u/DeadHead426 • 2d ago
I’m looking for the communities input on a top cabinet design incorporating a B&C 8PE21 and a B&C DE250 + 16”x6” hornflare (outside dimension of flange”.
Idealy this top cab would take over from a hot loaded Kick. Aprox 200hz Tyvm for reading
r/SoundSystem • u/the_flixer • 3d ago
r/SoundSystem • u/haxaxias • 3d ago
We are running 18LW2600 on our subs, gsub-like model. We are running them on an admark AD42 in stereo on 4R per channel (7800W per channel) but keep blowing our woofers, even on very low volume like 95dbc.
Hpf is set at 30hz
Lpf set at 85hz
32db gain on the amp
2 woofers per cabinet, wired parallel
All our speakoncable is H07rnf 4mm2
We are running everything on a 32A power distributor.
Any reason why the speakers might overheat even under low volumes?
The woofers are rated 1500W RMS, 3000w program power and 6000W peak., so that's 3000W RMS required per amplifier channel. We give 7800W RMS.
What are we doing wrong? Why do we keep burning our subwoofers even on low volumes? Max output voltage for the amplifier shouldn't be too much compared to what the woofers can handle.
We are puzzled as to why it keeps happening.
Any info is welcome!