r/Tetherspout • • Jan 04 '26

Tetherspout installation How To and FAQ NSFW

123 Upvotes

https://newbiesub.substack.com/p/installing-a-tetherspout

The internet's current repository for this knowledge is on Blogger, a platform that Google doesn't seem to be very interested in and its author hasn't posted anything in over a decade so I wrote my own version with that-was-a-pain-in-the-ass diagrams.


r/Tetherspout • • Jan 09 '25

Tetherspouts: How, What, When, Where, and Why NSFW

138 Upvotes

Very very short intro: a tetherspout is a short tube (~1") that is inserted into the urethra that, using a little quirk of male anatomy, is able to be secured in place and can be used as, let's call it, a prosthetic PA piecing. They can be worn for extended periods, perhaps indefinitely, and do not present a risk for UTIs.

A note on myself: I am fairly new tohave several thousands of hours in tetherspouts butand I do tend to do a lot of research. Please comment if your experience with anything here runs counter to this, you have some valuable additions, or there's something you'd like to see included.

A must read

Note: there seems to be a bug on Blogger with mobile browsers and mature content. Try from a desktop PC.. it should make you log in with your Google account. I did download the documents as PDF so if it ever does go down, they won't be lost. I'll see if I can contact the author and see if he'd be okay with them being hosted elsewhere.

The definitive info on tetherspouts:

A more modern version of the above by yours truly: https://newbiesub.substack.com/p/installing-a-tetherspout

For those who prefer videos (I would still strongly recommend reading as well):

Hardware

Where to buy spouts:

They are a pretty niche product so there aren’t a whole lot of sources.

  • Badass Workroom.. kinda the gold standard in tetherspouts and they can be customized and for an additional $25 can have a lock ring secured with a security screw.. a pretty simple way to secure a spout to a cage.
  • Ternence.. an inexpensive way to get started but they are needlessly wide and long.
  • Fetish Tools.. high end, 100% custom I believe. Thank you u/JeanDuvall. Seems to be out of business.
  • Fancy Steel.. very pricy, limited options
  • Search for Q407152, available serveral places, titanium.

The OG tetherspout site is still in operation but hasn’t had tetherspouts in stock for a really long time. I’m not sure if the owner / inventor is still in contact with the community. From the little knowledge I have, BAWR seems to be the definitive go to. I have contacted Ternence about the deficiencies in their spouts (too wide and too long as you get into the larger sized retainers). Hopefully they’ll re-engineer them at some point but IMHO, they are useful for experimenting.

Measuring

You’re going to need sizing sounds or just trial and error. You actually want a sound that is flat (Dittel sounds) so you can measure the vertical and horizontal sizes of the tissue independently. You want your spout's flange to easily fit in the horizontal dimension (no reason for the spout itself to be larger than 6 - 8 mm) and you want the retainer to be larger than the horizontal dimension but smaller than the vertical (just smaller may be more comfortable depending on what how you're using the spout and if you're putting any weight on it). I now sell a sound designed specifically for tetherspouts here.

Cage Support:

Unfortunately, the pickings are pretty slim but on the other hand, most cages can be used with a spout without too much difficulty.

  • Evotion has support for an extra $50 with their Bijou and Orion. I’ve been happy with both. I think the headlock feature adds a lot to the comfort.
  • BAWR has a solution with the BA-28T that involves a hook coming over the top of the cage. The advantage is there’s only one security lock to deal with.
  • BAWR will also weld his lock nut to the end of a cage. I’ve seen photos and looks pretty slick.
  • Fancy Steel's cages support tetherspouts but they don't really appear to do anything special but rely on a locking collar or a padlock.

There are plenty of ways to hack a spout onto a cage especially with BAWR’s lock ring. And any cage with a headlock such as Cherry Keeper can easily be made into a shaft-only cage with a washer on one end to hold the spout in place and then take a Dremel to the ring junction hardware. Personally, I have found headlocks fairly important to long term comfort as it helps keep the glans from moving. I tried just a washer on a BAWR test cage and after a few days, it got somewhat uncomfortable but my Bijou is on four days and I haven’t even noticed the spout. I suspect it’s the headlock.

Safety

I want to stress, I am not a medical professional and I’m also fairly new to this but I do research the hell out of shit and I have researched the hell out of this. The main concerns someone getting started with tetherspouts would likely have are:

  • UTIs
  • Unable to remove
  • Losing parts during installation / removal

For a great discussion, see this post.

UTIs

So, a tetherspout, while worn, goes about as deep as a PA. PAs seldom if ever cause UTIs so I’m unsure why a tetherspout would. I’ve never seen a report of a UTI from either. The time of greatest risk to exposure is during installation and removal. Reasonable precautions such as using sterile lube (the kind of lube used for catheters), washing your hands, and using alcohol wipes, and then urinating after done should minimize any chances of getting a UTI.

Removal difficulties

Fortunately, removal is actually easier than installation. I recommend, to calm your nerves, you start a retaining ring that’s too small for you because worse comes to worst, you can pull it out. It’ll be easier if you yaw the spout to the left or right to pivot the retainer so it’s somewhat in the correct orientation and it should come out without too much issue. I’m actually using a too-small retainer with my Bijou and I’m not sure if I’m going to bother upsizing to a BAWR E3 as I can’t get it out by pulling straight out which would be the only way to get it out with the cage locked (well, by pulling my penis straight out the back of the cage).

But what happens when you’re removing is something isn’t working quite right and you panic just a bit. Don’t panic. It’s not doing damage, Take a breath, hell, take a break. Think about what’s going on in your urethra. Re-read the removal blog post above and try again.

Now, there are two posts about retainers that got fused to the spout. Those were nylon retainers (one might have been 409 stainless steel). The more complete account involved a trip to the doctor where a small incision was made in that tissue and it was removed. But that’s not a concern with titanium. I’m not sure about 304 or 316L stainless steel (unsure what the Ternence spouts are made from but unless someone has more info, I would monitor them for deposits that could cause the retainer to stick to the spout). BAWR spouts have been worn for months and come out just as clean as they go in.

Edit: please see this about nitrile retainers. He's the only person I know of not using titanium or stainless steel.

Losing parts

So, the annoying part of installation for newbies is actually keeping the parts in. They really naturally want to come out so if somehow you pull the floss through, they really do want to come out on their own, at least the spout does. But there are some precautions you can take. More for convenience reasons than anything, I use binder clips on the floss ends that way I can string the floss through everything at once and don’t have to string on the 2nd spout, push in the first spout, take the floss out, string on the ring and the 2nd spout.. with the binder clip, it’s easy just to string on everything.

But what if the floss breaks? Try it. Take a length of floss and pull on it. Yeah, pretty damn strong. Floss breaks from abrasion, not tension. Your tissue would rip well before the floss would.

As an interesting historical note, the OG tetherspout guy used 409 stainless because he had a (literal) hard on for magnets and he sold magnetic probes to pull a lost part out of the urethra. One, I can’t imagine how a piece could get lost so far up that you couldn’t easily work it out by squeezing your shaft and two, it seems like a real easy way to rip a giant hole in your urethra. Can you imagine a urologist going “oh, it’s ferric? Let’s just use a magnet”?

Update: an excellent post on how to use the Terence installation tool: https://www.reddit.com/r/Tetherspout/s/aV0e2YpatN


r/Tetherspout • • 22m ago

Finally got my catheter in NSFW

Thumbnail gallery
• Upvotes

I posted a few days ago that I couldn’t get the spout in at all. Well I made progress today. I got a short catheter in. And then was able to get the spout in. I got the spout fully inserted. But only the length of the first spout. Tomorrow I’ll try fully installing (getting in past the point of a retainer).

I used tons of surgilube to get the catheter in. And was extremely slow. Def a little bit of pain and discomfort. But I’ve never had anything in my urethra before. So it was just new and scary.


r/Tetherspout • • 1d ago

Tetherspout content creators? NSFW

5 Upvotes

A while back I found a redgif channel of a straight couple with a lot Tetherspout content but I can’t find it anymore. In fact I can’t find any Tetherspout porn at all. Anyone know where to find some?


r/Tetherspout • • 2d ago

E1 to small ? NSFW

3 Upvotes

Hey everyone,
I recently started my TetherSpout journey with a BAWR E1. After a couple of attempts to get it in, I managed to insert the 11mm retaining ring, but it got pushed out as soon as I got aroused. I then tried the 12mm ring and secured it with a gauge piercing, which also ended up getting pushed out. So I'm guessing the retaining rings are still too small for me?

I also noticed that the 28mm length sits almost completely flush with my glans. To properly attach a cage or the locking ring, I feel like I’d need something closer to 32mm.

Do you have any recommendations on how to proceed from here?
I haven't done any precise measurements yet because I don't have the right tools. Should I get a set of sizing sounds first, and if so, which ones would you recommend?

I'm also wondering if I should try another BAWR model, though since the E2 only goes up to a 14mm ring (and is still 28mm long), I'm worried it might end up being too small again.

Thanks in advance for your help!


r/Tetherspout • • 3d ago

Using Three Rings NSFW

Post image
78 Upvotes

I started using three rings for a better fit and more comfort. Tetherspout moves way less internally like this.so your penis would be on the left. You would gloss and install in this order. Small ring then medium and last, large. I use the two spouts and floss just like with one ring. I just do three rings and then insert the second spout and flip them one by one.


r/Tetherspout • • 3d ago

Another Newbie Question: Sex NSFW

10 Upvotes

Does anyone have penetrative sex as an oral or anal top with your tetherspout in?

The situation: Let's assume that I'm a sub to men, that some of my partners wish to have full access to my penis, that they don't care if I have the tetherspout in while I'm inside them or while they're sucking my penis, and that they want me to achieve orgasm and ejaculate.

I think I can manage them performing oral, but as a penetrative anal top, would the tetherspout be forced against the retaining collar (donut) by the sphincter, putting too much pressure on the fossa novicularum?

Assumption: from a cleanliness point of view, assume that I have a protocol that would flush my urethra after penetrative anal sex to prevent potential bacterial infection.


r/Tetherspout • • 3d ago

Weight of the BAWR lock collar NSFW

2 Upvotes

Does anyone know how much does the BAWR lock collar weigh? I would greatly appreciate an answer.
Thanks.


r/Tetherspout • • 4d ago

First Time Install: Success NSFW

Post image
55 Upvotes

Equipment: CESBondage "E2" titanium tetherspout, fitted with just the disc, no cage.

  1. length: 28mm barrel;
  2. barrel diameter: 7mm:
  3. flange diameter: 9mm
  4. donut diameter: 13mm

r/Tetherspout • • 3d ago

New Spout NSFW

2 Upvotes

Good morning,

I'm looking into buying a new TS. At the moment I have a 9mm one from Aliexpress which has an okish fit but looks way to long and starts to rust. So thinking about going for a BAWR E1 or E2. A 8mm Rosebutt Sound fits easily down my urethra, a 10mm "pops" in and out. The 11mm retainer of the Aliexpress Spout fits ok, i think 12mm will be better. I only intent to wear it as jewelry or for e-stim not for securing. on that topic what's the diameter of the hole across and on the inside? Would you recommend the E1 or E2 for me? And I've seen that there also is CES would you recommend them over BAWR? Last question as I'am from germany is there a EU seller that sells titanium Thetherspouts?

TIA

Bob


r/Tetherspout • • 4d ago

Solving discomfort caused by Spout slowly sliding out NSFW

5 Upvotes

hey everyone, I’ve got a question about comfort and the spout slowly sliding out.

I just started successfully wearing a spout on and off over the last couple weeks after measuring with a hegar sound and trying the smallest Terrence spout, I finally got a BAWR E1 and can now comfortably (ish) wear it with a 12mm retainer with a Kink3d cage and a locking collar.

However, the spout slowly slides out, gradually dragging the retainer with it till it’s right about at the donut ligament. I’ve been assembling the retainer onto the spout while both are basically behind my corona, so its probably deep enough. I’ve also not had any problem with urine leaking. will this sliding problem be solved when I finally get my custom cage that will attach to the spout, or do I need an additional solution?

thanks in advance!


r/Tetherspout • • 4d ago

Newbie Question NSFW

6 Upvotes

TLDR: Does anybody have some ideas about ways to prevent your dick from rubbing stuff and moving the tetherspout all around while you're asleep other than chastity?

Equipment: CESBondage "E2" titanium tetherspout, fitted with just the disc, no cage.

  1. length: 28mm barrel;
  2. barrel diameter: 7mm:
  3. flange diameter: 9mm
  4. donut diameter: 13mm

Installed first try with the 12mm donut. That night however, I awakened to a burning sensation in my urethra. I was asleep, and a I sleep in the nude, and was awakened by the burning sensation at the point where the donut meets the fossa novicularum. I removed the tetherspout and after about an hour, the burning had subsided, so I reinstalled it later in the morning using the 13mm donut.

My thinking: my nighttime erections combined with the tetherspout and disc sticking from the end of my dick may have been catching on the sheets and tugging on the donut, causing discomfort. So, last night, I wore underwear (briefs) to bed with the hope that it would prevent the tetherspout from rubbing and getting tugged, etc. It was a little better, but I still woke up a few times to the burning sensation, albeit not as intense. After peeing and ejaculating, the pain dissipated completely. I didn't remove it this morning and I'm currently experiencing no pain.

I'm uncut, and the disc and tetherspout is under my foreskin most of the time and I tried to keep it like that all night, but the times I woke up, I was fully engorged and hard, so it was able to rub on the underwear, but with less possibility of movement than the previous night.

Does anybody have some ideas about ways to prevent your dick from rubbing stuff and moving the tetherspout all around while you're asleep other than chastity?


r/Tetherspout • • 5d ago

Finally in NSFW

Post image
76 Upvotes

After multiple attempts and frustration, mostly due to figuring out the right retainer size and the actual depth I need to insert for it to "lock", today is the first time I made it happen and it feels solid.

I made the leap and ordered a custom CES Bondage titanium kit E1 but with E3 retainer size and it finally stayed in! Of course, I had to pair it to my cage next!

Had to slightly enlarge my Terrance middle hole to just about fit the E1 tube flushed (I was aiming for looser so it's more of an accidental fit) which is why I don't need the locking ring (kinda hated how large it was anyway), just dropped in a small piercing ring just in case something bumps the tip harder so it can't completely go inside although I'd have to knock it pretty hard.

Finally I can pee freely in my smaller cage that I like!

Fingers crossed no UTI's now. Gonna see just how comfortable it is and might leave it in permanently.

Good luck to anyone else that struggles with fit, you will get there with enough experimentation.

P.S. this is my first ever dick pic online go easy on me 😅


r/Tetherspout • • 6d ago

Not intended to be “too horny” but sorry if it is 😢 NSFW

142 Upvotes

r/Tetherspout • • 8d ago

Adapting to the spout NSFW

10 Upvotes

I've been trying to use a tetherspout for a few days now, and I think it takes a little time for the urethra to adapt to having the spout inside.

The goal is to use the spout to secure a chastity cage, and after my first succesful attempt at installing it I charged ahead and coupled it to my steel cage. That became unpleasant after a few hours, so I took it off. Granted, this is a fairly heavy cage (Looker 02 from Steelwerks - about 180 grams).

Since then I've tried just having the spout installed and a cage on top of it (spout not connected to the cage), and that worked fine for a couple of days. I took it out because I was beginning to feel some irritation - kind of like an itch - inside the urethra. It went away after a good nights sleep.

Is that what I should expect? I plan to gradually increase the time I'm wearing it - without a cage to begin with - until I can go for a week or so, and then try to add a cage. I have a BAWR resin cage with a tetherspout fitting, which is much lighter, so I'll start with that one, and then upgrade to the steel cage later. Does that sound like a good plan?

Couple of pics attached. As you can see I put a piercing-barbell staff in the spout opening - I know the spout won't disappear into my dick, but just to be "safe" ... and because I thought it looked fun.


r/Tetherspout • • 11d ago

First time NSFW

Thumbnail
gallery
54 Upvotes

Hi guys! I’m a new Tetherspout user. Please allow me to share my experiences from my first insertion. I ordered a 9mm version from Ternence to try it out. Before insertion, I disinfected it with 96% alcohol and let it dry. I didn’t use the included string—or any other string—for the insertion. For lubricant, I used Aquaglide; I really like this brand and am quite satisfied with it. So, after applying lubricant, I slowly pushed the stem into my urethra—deep enough so that it wouldn’t just pop back out on its own. Once that was done, I lubricated the included ring and inserted it into the urethra as well, though not as deeply, of course. To help rotate the ring while it was inside the urethra, I used another toy. By inserting this tool after the ring and wiggling it a bit, I was able to turn the ring so that it slid perfectly onto the stem I had already inserted, thereby securing the Tetherspout in my cock. I’ve attached a photo of the toy I used. By the way, I’m not really sure what the thick tube that came with it is supposed to be used for—it seems way too thick to me…


r/Tetherspout • • 11d ago

Is it safe from sliding in? NSFW

3 Upvotes

I am using an 8mm ternence spout and was wondering if it was able to slide in fully if left unsecured. I usually remove chastity before doing sports and I'd like to hide the spout in the shower because I don't want to remove it all the time. I am uncut however the locking Collar I usually use still sticks out noticably.


r/Tetherspout • • 11d ago

Compatabile Cages NSFW

3 Upvotes

Where is the best place to purchase compatible cages that allow for the spout to be fixed to the cage and pivot?


r/Tetherspout • • 12d ago

Locked till tomorrow NSFW

Thumbnail
gallery
54 Upvotes

r/Tetherspout • • 12d ago

Trying out a new cage. Spout really completes it NSFW

Post image
132 Upvotes

I discovered my soulock cage is spout compatible and god how comfortable it is. I am in love with how the spout solves every issue with security, peeing cleanly and overall fit and comfort.


r/Tetherspout • • 12d ago

First time trouble getting in NSFW

2 Upvotes

Hi - I did my research and bought the smallest Terence’s on Amazon 8 and 9mm. I’m trying my first time today, and I can’t get the spout more than 1/8” in without discomfort. I used tons of Surgilube. I read all the guides and lots of posts about people’s first time. What else can I try to work it in? I was going very slow and applying very gentle pressure. I was also standing up (at my bathroom sink) - and soft (not erect).

Any first time secrets I can try?


r/Tetherspout • • 12d ago

Tetherspout long enough NSFW

2 Upvotes

Hi everyone,

I'm relatively new to using a tetherspout and recently got the BAWR E1. When I first inserted it, I was surprised to find that the tip of the spout lines up almost completely flush with my glans, meaning there’s no protruding length or room for adding any external locking mechanism or security screw on top.

Despite this, I wore it for about 15 hours yesterday, and it felt comfortable and stayed securely in place.

Encouraged by that, I tried wearing it overnight.

- The night & morning: My morning erection caused a mild burning sensation, but nothing severe.

- The issue: Later in the day while getting aroused, the spout slipped out entirely on its own.

Based on this, I suspect the retainer might still be slightly too small, and I'm thinking of trying the 12mm size next.

I’d love to get your advice on a few things:

  1. Sizing & Length: Do I need a longer spout so it actually extends past the glans, or is a flush/short fit normal? How do I determine the correct length?

  2. Stability: What causes it to pop out during arousal, and how can I prevent it?

  3. General Optimization: Any tips on how to further optimize the fit and comfort for daily wear and night use?

Thanks in advance for any insights or recommendations!


r/Tetherspout • • 15d ago

Got It in but some blood:) NSFW

6 Upvotes

So short follow up I got it in with just some blood few drops now of course it’s a bit sore so I’m contemplating whether to just leave it in for the night a few days to let it heal and then start taking it out again when it feels fine again or what would you guys recommend?


r/Tetherspout • • 16d ago

First try NSFW

Thumbnail
gallery
78 Upvotes

I think my spout is a little bit too small, but dont came out if i pull.


r/Tetherspout • • 17d ago

Custom cage NSFW

Post image
170 Upvotes

I had a website for a bit with ordering and everything for my cage design but moved on to other work, I am not an exhibitionist and have had this picture for almost a year before deciding to post it.

Maybe I'll make them again one day but being a busy father of 5 means very little time in the afternoon for development and improvement or production.