r/2Strokes • • 4h ago

Rieju MRT 50

1 Upvotes

Hi

i have a Rieju MRT 50 and I wanna make it higher because Im 2 Metres tal. Should i add a Self construction at the suspension to make it higher. It musnt be legal


r/2Strokes • • 6h ago

Question Thinking about Restoring A 2 Stroke as a Summer Break Quest, Any tips?

1 Upvotes

Im a guy from India and im thinking of restoring a RX100 and im not sure where to start


r/2Strokes • • 14h ago

Help!!! Need a kickstart for YZ490

Post image
2 Upvotes

r/2Strokes • • 15h ago

XP100 in RX100

Thumbnail reddit.com
2 Upvotes

r/2Strokes • • 1d ago

Self-contained front-wheel drive 36cc 2-stroke looking for replacement

Thumbnail gallery
5 Upvotes

Originally came with folding handlebars and a wooden cart that was pulled from the wheel


r/2Strokes • • 1d ago

POLL personal opinion on a Yamaha tzr

Thumbnail gallery
10 Upvotes

I have this yamaha tzr 50, in the first pic there aren't any fairings, just that light. in the second pic, the bike as it sits now. the problem is: the fairings are really beaten up, the other side hasn't got any stickers and it mounts on the bike just with zipties. new fairings are impossible to find (if not for 1k, and it's not worth it) and repairing them would me as expensive as buying a new set. from far away they look great, until you look closely. do you think the fist pic is better (maybe with a mt09 2018 headlight) or the bike with the fairings is just better?


r/2Strokes • • 1d ago

Cerco qualcuno esperto di scooter 2T a Firenze e dintorni (preferibilmente sesto fiorentino)

1 Upvotes

Ciao a tutti! Ho un Piaggio Typhoon 50 2T raffreddato ad aria e sto cercando qualcuno di Firenze o zone limitrofe che abbia esperienza con questi motori e sappia mettere mano alla parte di aspirazione.

In particolare vorrei lavorare su carburatore, collettore e pacco lamellare, mantenendo il gruppo termico originale 50cc.

Cerco qualcuno che possa aiutarmi con la scelta dei componenti, il montaggio e la corretta messa a punto.

Se conoscete qualcuno oppure siete voi stessi esperti, scrivetemi nei commenti o in privato. Grazie!


r/2Strokes • • 1d ago

Question How hard can I be on my cr125r?

0 Upvotes

I know I can rip the shit out of it on tracks n stuff, but can i trail ride it? Will doing rocky hillclimbs/hard enduro on tuff trails harm it? If I stall it or it bogs out is that bad? I recently blew this thing up and rebuilt it and now in terrified to do it again lol. (recently transferred over from a 4stroke)


r/2Strokes • • 2d ago

Question Split between power valve and case?

Thumbnail gallery
3 Upvotes

This is my project 2001 Cr125r, Is it leaking air/a problem for the engine? I can see a considerable gap.


r/2Strokes • • 3d ago

2009 yz 250/300 works big bore kit runnin 110vp fuel with klotz

Thumbnail gallery
13 Upvotes

r/2Strokes • • 3d ago

​Beta RR 300 (2020): hohler Sound im Leerlauf / unterer Drehzahlbereich

1 Upvotes

Ich habe eine Beta RR 300 (Bj. 2020, 2-Takt). Bei niedrigen Drehzahlen und im Standgas hat der Motor heftige Knallgeräusche und einen hohlen Auspuffsound. Ab einer bestimmten, konstanten Drehzahl schaltet es abrupt um, das Knallen ist komplett weg und sie läuft normal.

Bisher gemacht: Neue Zündkerze (Kerzenbild davor war stark verrußt/fett), Krümmerdichtungen/O-Ringe geprüft, Leerlauf-Gemischschraube eingestellt (reagiert kaum). Bedüsung und Luftfilter sind Standard. Wer hat einen Tipp, woran das im Leerlauf- oder Zündkreis noch liegen kann?“


r/2Strokes • • 3d ago

My latest 'china girl'

Thumbnail gallery
5 Upvotes

r/2Strokes • • 3d ago

2009 yz 250 /300 with works big bore kit runnin 110 vp race fuel

Thumbnail reddit.com
1 Upvotes

r/2Strokes • • 3d ago

salut a tous

1 Upvotes

salut a tous je fait mon premier post sur reddit pour un soucis que j'ai avec mon 70 motoforce monté sur ma rieju Mrt de 2022

le soucis est que j'ai le joint torique de culasse (celui du milieu) qui se pince ca me l'a fais deux fois ( et les deux fois avec un joint neuf 😉😉) ps: je mets de la graisse dans la gorge du joint pour le faire tenir ( mais rien n'y fait 😓😓😓) donc si a tout hasard vous auriez des solutions/idées je suis plus que preneur car la je désespère merci d'avance


r/2Strokes • • 4d ago

Question Mitaka pistons

2 Upvotes

Has anyone ever bought Mitaka piston ? I found one for my 150 Sx 2012 and it was pretty cheap compared to others, I was wondering if somebody had buy a piston from them before and what was it worth in terms of reliability ? Thanks


r/2Strokes • • 4d ago

Does my 1999 yz125 sound normal?

2 Upvotes

This is as low as I could get the idle by turning the air screw out. Turning the air screw in makes the idle higher which I thought was supposed to be opposite. I just cleaned the carb and replaced the het block gasket. I’m not sure if that deep rumble noise is normal either when it is idling.


r/2Strokes • • 4d ago

About crossline

1 Upvotes

Hello guys, to the pros out there, I just wanted to ask, s it really necessary to have the engine block honed? My block has no scratches and the ring gap is still within specs. The only issue is that there's a part where the 'crosshatch' (crossline) is almost gone. Do I still really need to do it or not? Please help.


r/2Strokes • • 4d ago

now what do i do

2 Upvotes

carters are destroyed. what can I do?


r/2Strokes • • 4d ago

Anybody Else Running Klotz 2 Stroke Oil In Their Gas Powered RC?

Thumbnail reddit.com
1 Upvotes

r/2Strokes • • 4d ago

YZ250 Engine Noise

1 Upvotes

r/2Strokes • • 5d ago

What could have caused this piston damage?

Thumbnail gallery
14 Upvotes

Hey everyone;

I was randomly taking my 125cc Sachs 1251/5B 2-stroke engine apart to check on things and saw this severe scarring on the piston (rubs on the nails) but the cylinder has nothing...

Bike had around 8 bars of compression cold and ran normally, if not very well (for a 1970 military motorcycle [Hercules K125BW] it reached 100km/h) so I was wondering what could have caused this?

I don't want to spend 100 bucks on a piston that will end up like this one, so I was wondering if y'all had any ideas what could cause this ?

Bike has a full aluminium cylinder (no iron sleeve inside) and runs a bit too advanced for maximum power (original with points was 2.5-3.5mm before TDC, I set 2.1mm with my electronic ignition) but doesn't look like overheating. I run 1:33 mix and in fact from 2nd picture it looks like slightly too rich (I'll probably diminish the main jet). Ideas?


r/2Strokes • • 5d ago

Fresh rebuild, what would cause this?

Thumbnail gallery
5 Upvotes

r/2Strokes • • 6d ago

Is this connection from expansion chamber normal

Post image
9 Upvotes

I’m not too sure if it is or not but ever since I added this pipe the bike can’t even keep up on roads not passing 28mph?


r/2Strokes • • 6d ago

old skool ignition with 2-in-1 ignition coil

Post image
2 Upvotes

i only know 2 ignition technologies for 2T engines

1 contact points

2 CDI (requires a pulser)

the motor i have (Kawasaki AR80 or Magnum 80 if you're Thai) do not have contacts and does not have a pulser. it relies on the primary coil and a "magic" 2-in-1 ignition coil that contains both CDI and the step-up coil. Kawasaki term for it seems to be "Ignition Coil CDI UNIT".

from what i can see the primary coil is just connected to the 2-in-1 ignition coil with just one wire coming out of the stator.

i want to understand how this works but i can't find information. i have the "Motorcycle Electrical Haynes Techbook Haynes Repair Manual" but no information on this ignition type. pointers please