r/335D • u/Prior-Bake5772 • 44m ago
Injector Help Post
If you have these codes for your M57 335d or X5 35d, I will tell you how I solved mine and what to check.
- 004595 - Cyl 6 Smooth Running
- 004BA2 - Cyl 2 Injection Quantity Compensation
- 004BA6 - Cyl 5 Injection Quantity Compensation
- 004CEE - Cyl 2 Injector Rate Adjustment
- 004CF9 - Cyl 5 Injector Rate Adjustment
- 004BD9 - Cyl 6 Activation
If you have other codes pertaining to Injection Quantity Compensation or Rate Adjustment, first off grab your scanner and check the Injector Programming. I found that for Cylinder 2 and Cylinder 5, the injectors were coded as AAAAAAA, which is impossible. The rest of the injectors again did not have the correct code for any of the cylinders. I recoded the injectors with the 7 digit code off each injector and it eliminated the Injection Quantity Compensation and Inejctor Rate Adjustment codes. Please note, cylinder 1 is closest to radiator, cylinder 6 closest to firewall and goes in order. When inputting the codes, make note to input the codes for which cylinder. These codes tell the DDE how to work with the injectors.
As for Cylinder 6 codes, this could pertain to any injector. If you are having these codes, first you'll need to check the Ohms of the injector. Remove the connector, use the volt meter to check Ohms on affected injector. If you are getting anything below 170, replace the injector. My injector was reading 19-20, when the others read 180, which is within specification. The injector functioned, but, it would go into limp mode after 10-15 minutes.