r/3DScanning • u/LiDAR3DGUY • 5h ago
Wanted to share a recent reality capture project I worked on.
used LiDAR scanning to create a detailed 3D digital twin of the production floor, capturing equipment, machinery, and the surrounding environment.
r/3DScanning • u/LiDAR3DGUY • 5h ago
used LiDAR scanning to create a detailed 3D digital twin of the production floor, capturing equipment, machinery, and the surrounding environment.
r/3DScanning • u/Tight-Fact4035 • 12h ago
So a little while ago, I bought a budget 3D scanner (3DMakerPro) to replicate orthotics for a ski shop. It works pretty well and is quite good at capturing the surface--which is all I really needed. Regardless, every scan needed a good amount of post-processing, cleaning up the edges, removing the background, etc... The software from 3D maker pro was okay at this, but very manual, and when it came to 3D printing, it was another hassle to import into GH, refine the mesh, extrude...
Anyway, I built an app that does all of it for me and trained a neural network on the cut lines so that I spend less time post-processing. TBH it took 2 years to build, but now it takes ~1 minute to clean the scan and print it, rather than 30 minutes.
It's free and available on Mac and Windows if anyone wants to try it out. I've only used it on orthotics, but the tools work on other objects as well. https://lefeetlab.com/got_mesh/
r/3DScanning • u/Plastic_Phase_4672 • 10h ago
Hi everyone!
I’m looking to buy a 3D scanner as a Christmas gift for my husband, and I’d really appreciate some recommendations based on real-world experience.
My laptop is a 2020 MacBook Air M1 with 8GB RAM, and this is currently the only computer we have available for 3D scanning and processing.
We also own a Bambu Lab 3D printer.
Our main goal is to scan existing physical objects and 3D print copies of them. Most objects will be relatively small or medium-sized, generally up to around 25–30 cm. We might also want to scan separate parts of a larger object and combine them.
We’re particularly interested in:
● Good accuracy and detail
● Reliable tracking
● Software that runs smoothly on an M1 MacBook Air (not just M1 Pro/Max)
● Minimal post-processing, if possible
● A scanner suitable for creating printable 3D models
My budget is approximately $300–650, although I could stretch it a little for a significantly better option.
I’ve been looking at:
● Creality Otter / Otter Lite
● 3DMakerpro Seal Lite
● Revopoint scanners
However, I’m finding mixed information about Mac compatibility, especially with the base M1 chip.
Which scanner would you recommend for this setup? Does anyone here actually use one of these scanners with a base M1 MacBook Air and 16GB RAM?
I’d especially appreciate real-world experiences, including software performance, crashes, tracking issues and overall scan quality.
Thanks in advance!
r/3DScanning • u/RollingCamel • 8h ago
We received the update now and after installing the tracker is not identifying the calibration rod. Anyone facing similar issue?
r/3DScanning • u/FoldOutrageous5532 • 1d ago
Is it realistic to think I can scan this insert well enough to get a 3d printable model from it? I tried polycam on my iphone and got about 60 images of it, but it's pretty bad. So I'm exploring trying a better scanner.
I'm also trying to model this in Fusion but I'm not a skilled fusion user. Willing to learn...
r/3DScanning • u/Snooze0perator • 10h ago
Hi all, I have used the search button and yea its a dime a dozen post which you probably are getting tired off but I can use some guidance.
Im into 3d printing (as a hobby with a X1C) and would like more flexibility in scan to print kinda solutions. My Cad/modeling experience is limited and since time is a factor for me the learning curve seems pretty steep. I chatted with AI a bit about 3D scanners and with all the deals flying around for Black Friday im seeing if there is anything good to get. Budget wise im aiming to stay well below 1K and portability is a factor. So far I narrowed it down to a Creality Raptor and Otter (hate the pc link part) they have pretty good deals. A pika which Creality has on sale. Or the Revopoint Miraco which I can get a pretty good used deal on. Currently im mostly on the fence between the Pika or the Miraco and since they are a tier apart I cant seem to find a good comparison. Hopefully you guys can weigh in! many thanks.
r/3DScanning • u/UsualStretch1234 • 11h ago
r/3DScanning • u/rakhimano • 15h ago
r/3DScanning • u/Apprehensive_Low_219 • 1d ago
Hi, I was looking for the Black Friday deals and I just found this new 3D Scanner from Creality, the Raptor Pro Max, just like the iPhone!!
Jokes aside, was this scanner announced anywhere? Or they just released it in the store with no announcement? Do we know if there are more technical characteristics anywhere?
r/3DScanning • u/Rilot • 1d ago
Revopoint sent me a pre-production Miraco 2. I only got it last night so take these results as they are. No prep (other than on the very shiny metal car part) and all scanned in cross-lines. I've yet to try any of the other modes but will do soon.
It's..... rather good.
r/3DScanning • u/Ok_Bad6575 • 1d ago
r/3DScanning • u/srtgt • 1d ago
First scan with the Revopoint Trackit SR using Marker mode!
The part is a Nissan Primera headlight bezel. A friend of mine previously tried scanning it with an EINSTAR, but the scanner struggled to capture it properly.
Really impressive to see that the Trackit SR was able to capture even a tiny hole of approximately 1.3 mm! 😍
r/3DScanning • u/PaperYo • 1d ago
#Creality3DScanner #3dscanning #SermoonP1S #reverseengineering #scanyoureveryday
r/3DScanning • u/UsualStretch1234 • 1d ago
r/3DScanning • u/Recent-Midnight6376 • 1d ago
Yeah I did Google but haven't come to a definite conclusion.
So for that price point, what would be the smartest solution?
I'm afraid most of what I want to scan is black. But only small things, wireless isn't necessary.
r/3DScanning • u/AbjectChildhood1207 • 2d ago
Hey everyone,
Dinovi just got approved on the App Store, so anyone can try it now. (last update was Ultra Wide ANGLE dinovi now support ULTRA WIDE ANGLE FOR LIDAR and RGB on iPhone !! EASIER CAPTURE THAN EVER !! : r/GaussianSplatting)
https://apps.apple.com/app/id6822437306
For anyone new here: you scan a room or an object with your iPhone, and everything gets computed on the phone itself. The Gaussian splat, the mesh, all of it. No PC, no GPU, no uploading your scans to a server and waiting, your phone thats it. The Splat that you see in the video is 10k iteration arround 1m splats and took arround 20 minutes.
I'll say it: I think the quality beats Polycam and Scaniverse. Thanks to everyone who tested it, sent feedback and shared the scans that helped me on few points :) So thank you, really.
There's also a new tutorial I'm pretty happy with. Before your first scan, it plays a small animated 3D demo of the path to walk around a room or around an object, with the phone view right next to it. Half of a good result is how you scan, so it makes a real difference.
The 0.5× ultra wide is now available everywhere too, with LiDAR or with the camera only. Dinovi works with LiDAR on Pro iPhones, and with just the camera on any iPhone 12 or newer.
Scan the same room with Dinovi and with your usual app, and tell me if I'm wrong. I read every comment.
r/3DScanning • u/taecrazyy • 1d ago
I’m trying to get accurate molds not sure if anyone can help me I have a Metro X 3d scanner and can’t seem to capture a lot of detail
Point me in the right direction pls :)
r/3DScanning • u/WearyMap3233 • 1d ago
We have a mold about 2 m long that needs to come back as CAD. And also, the accuracy needs to be under 0.5 mm, not just the rough shape. I noticed that half of it is shiny, and some spots are hard to reach. Our plant also won’t allow spray or stick-on targets on it.
From your experience, who does both the scanning and the CAD rebuild? And what should the quote include?
r/3DScanning • u/Employment-Tough • 2d ago
Audi A6 Fog Light Grille – 3D Scanning with EinScan Rigil!
This time, I scanned an Audi A6 fog light grille, capturing both sides, including the complex grille pattern, mounting points, and internal geometry.
⚙️ Scanning setup:
- 🔹 Scanner: SHINING 3D EinScan Rigil
- 🔹 Resolution: 0.25 mm
- 🔹 Scan mode: Cross Laser only
- 🔹 Total scans: 2 (front and back)
- 🔹 Connection: Wired to laptop
- 🔹 Scanning spray: None
- 🔹 Markers: Only a few, for tracking and alignment
Despite the complex geometry, thin structures, and multiple openings, the Rigil managed to capture an impressive amount of detail without any scanning spray.
After aligning both scans (manually aligned) and processing the scan, the result is a detailed 3D mesh ready for further work.
This is exactly where 3D scanning becomes valuable for automotive applications, reverse engineering, replacement parts, custom modifications, and 3D printing.
What do you think of the final result?
r/3DScanning • u/ReputationWorried369 • 2d ago
r/3DScanning • u/TeeneKay • 2d ago
Hello. Im thinking of making a front lip and ducktail spoiler for my car. For that id need a 3d scan of my bumper and trunk. Would my iphone 12 pro be good enough to capture the geometry so i could put it in blender and get a model for printing. I know the phones lidar is not the best at small details but im guessing a bumper is big enough to get enough detail out of it. Any recommendations for apps if this would be possible?
r/3DScanning • u/Lost-Brief-7499 • 2d ago
r/3DScanning • u/ovsazi • 3d ago