r/3Dprinting • • 10h ago

Print (model not provided) My wife printed and painted this for me! NSFW

Thumbnail gallery
1.9k Upvotes

I’m really excited to play the game but still 24 hours away. Don’t know how she can even do the tattoos. I love it.


r/3Dprinting • • 6h ago

Project Life Size 3D Printed Horus in Black

Thumbnail
gallery
1.2k Upvotes

I’ve been delaying working on Horus for better weather, and I finally made some progress.

Fully painted black and ready for trim painting. I landed on using brushes as the better option. More control for the amount of detail the armor has.

The noticeable part, seam lines. Some are better covered and blended than others. But with 600 pcs, alignment of parts and a smooth surface isn’t realistic. Offset pcs compound.

Short of using some type of real thick filler to coat the entire part, this is the best I could do.

I’m sure once I paint the trimmings, the seam lines would be less visible or at least not as noticeable.

I still have to fill the seam lines for the top half and paint. Then I can call the project more or less done.


r/3Dprinting • • 21h ago

Project Sauron, in FDM

Thumbnail
gallery
582 Upvotes

I printed the gambody Sauron on my P1S. I made the cape out of microfiber and velvet and designed and printed the custom stand. He’s finished in Nato black and then burnished graphite powder The files are printed at 200% size for a 1:4 scale figure with a layer height of .08-.12


r/3Dprinting • • 17h ago

Discussion 3D Printing Community Needs to Stop Making FDM Pet Toys

379 Upvotes

If you look for 3D printing cat toys, you will find multiple websites and many versions submitted by users. You will find cats biting on these.

Cat biting on PLA

You will even find platforms promoting contests: https://www.printables.com/contest/373-cat-toys

This is all inherently dangerous, I will link just one study: https://www.researchgate.net/publication/370838510_Study_on_the_Sanitization_Efficacy_for_Safe_Use_of_3D-Printed_Parts_for_Food_and_Medical_Applications

But, in summary, 3D printed plastics are inherently made of layers and crevices where the saliva rushes in and bacteria grows in there. When a pet bites on these, the brittle plastic can easily splinter into sharp shards, and the friction causes them to ingest microplastics along with the bacteria.

So instead, and with the sole intention of helping our pets, I am attempting to share awareness here.

If you actually want to make a safe cat toy, design a hybrid. 3D print a custom handle, and attach a rope with a wooden toy or feathers at the end for the cat to interact with.

Keep your pets safe, thanks!


r/3Dprinting • • 10h ago

Project I made a 3D Printed Dell Docking Station and Laptop Mount

320 Upvotes

I designed this mount because some of our staff have limited space to place their laptop and docking station on their desk. This mount hangs in the negative space behind the monitor to store a Dell WD25 and laptop.

Currently I have 2 profiles to fit both the Dell Pro 34 Plus P3425WE and Dell Pro 22 Plus P2225H Monitor.


r/3Dprinting • • 6h ago

Discussion What do you do with nearly empty rolls?

Post image
259 Upvotes

I can’t tell you how many nearly empty spools I have. Does anyone have any suggestions for finishing these off?


r/3Dprinting • • 7h ago

Discussion My last free model - follow up post

Post image
233 Upvotes

I want to thank everyone for helping me get through the very sad day I had yesterday. I have received an overwhelming response from all of you and this really shows what this community is all about, to this day.

Unfortunately, for my sanity, I have decided to take down all my free designs from MakerWorld. I want to say “I’m sorry” to the thousands of people that downloaded my models in the past, but won’t be able to in the future.

My messages will always be open for people that can’t afford the models and I will gladly keep offering them for free, just not publicly anymore.

A few have ruined it for many.

I hope I will get tougher in the future to the point of changing my mind, but for now, I think this is the only way I can feel ok about this.

Thank you all for being such an incredible group of people, I am proud of being one of you.


r/3Dprinting • • 4h ago

Print (model not provided) they print anything these days NSFW

Post image
229 Upvotes

Displayed at Formnext 2026 in Germany


r/3Dprinting • • 12h ago

Troubleshooting How did I do?

Post image
205 Upvotes

r/3Dprinting • • 20h ago

Project Wood Grain Wedding Gift

Thumbnail
gallery
195 Upvotes

Made a fun Mr&Mrs GBA SP wedding bundle gift for family friends about to marry! The faux wood grain printed with wood PLA looked fantastic and I am so happy with how it turned out. Hardware kit from Amazon installed with super glue and heated screws worked amazingly as well😍🤵🏽‍♂️👰🏽‍♀️


r/3Dprinting • • 23h ago

Free Model Sleeping Fox

Post image
158 Upvotes

Model available on MakerWorld


r/3Dprinting • • 14h ago

Project 3d Printed Sticker / Card Vending Machine

136 Upvotes

I'm really proud of how it's turning out! First thing I have designed, I learned as I went. I am still tweaking some parts since it's so tiny inside and I want to maximize performance, if that makes sense.


r/3Dprinting • • 4h ago

Project Indiana Jones and the Last Crusade – A Little Progress Update on My 3D-Printed Diorama

Thumbnail
gallery
116 Upvotes

Dear fellow 3D-printing enthusiasts,

I thought I would share a little progress update on my ongoing Indiana Jones and the Last Crusade diorama.

The motorcycle and sidecar are now largely finished, and both Indy and Professor Henry Jones Sr. are gradually coming to life.

I've been particularly keen to capture the character of the original film scene, from the weathered motorcycle and worn leather jacket to the subtle interaction between father and son.

There are still a few finishing touches to attend to, but I am rather pleased with how everything is coming together.

I hope you enjoy the photographs, and I would be delighted to hear your thoughts, suggestions or constructive criticism.

After all, the adventure is far from over!

Happy printing, everyone!


r/3Dprinting • • 12h ago

Project Massive haul

Thumbnail
gallery
112 Upvotes

I acquired the biggest load of 3d gear a few months ago. It's been stuck in a container for months and I'm real happy that its finally got it unpacked. A friend of mine got screwed over as the landlord of a large Australian retailer. And the result was a seizure of all this stuff and a me getting it all real cheap. It is around 10Metric ton and filled one and a half shipping containers..

In the stash is a bunch of Raised3D machines. E2, E3CF, Pro3, Forge1 and a mix of Flashforge, MakerBot MethodX, and a bunch of Maku vacuum forming machines. It's nice having a little print farm again and I'm sure my engineering brain will figure out heaps of things to make.

Also a huge stack of filiment, about 5000kg. Every possible type, brands like Spectrum, Raise3d, Protopasta, BASF and many specialist filiments. Engineering, jewelry, prosthetics, conducting, dental ect.

Included is also thousands of repair components and spare parts. In tiny little bags, it will take months to get them all listed on Ebay or whatever.

Then I have a huge amount of resin too. About 2000kg. I haven't even started understand the value or uses there. But I'm sure it has value to someone.

I'm exploring ways to move this stock in bul or retail but haven't really settled on anything. I'm just SOOO pumped to have access to all this amazing filiment.


r/3Dprinting • • 21h ago

Project Finally “finished” my cupholder project

Thumbnail
gallery
96 Upvotes

I’ve been working on cup holders for a bmw e46 for maybe 6 ish months, but it’s finally done and is very pretty. A guy can die happy now…


r/3Dprinting • • 5h ago

Free Model Today's the day

Post image
84 Upvotes

r/3Dprinting • • 3h ago

Project Ripple Gear Artwork - Infill Shading + Tessellation

61 Upvotes

It's dark and gloomy in the UK right now, so I took this out to the backyard to catch what little sun we get this time of year. 🌥️

I wanted to share this view because cameras struggle to capture the full effect, and the light makes a big difference. The piece changes with light and angle, and I've found it never looks quite the same twice.

The technique is called Infill Shading and it's something that also got featured on ALL3DP back when I made my first post about it. I've essentially made tessellating tiles and added bands of colour, plus change the print settings to widen or tighten the spacing between the infill lines. That changes how much light comes through from below and how strongly the pattern shifts as you move. The resulting visual glitch like effects also produce much more interesting geometries and shapes depending on the angle and distance you watch it from. It took 40+ prototypes before I started to get the settings right, but what's especially cool is that tiny changes to settings can create dramatically different results and visual artefacts.

Specs: about 84 cm in diameter; about 30–40 mm deep including the back plate and wood backing; printed in PETG for durability over PLA.

I'm now building a few more pieces and hoping to submit one to an exhibition. I'm also keen to learn how to price, market and sell art. If you've sold 3D printed art, how would you price a piece like this? Any tips on where to sell, or on exhibitions, are very welcome.


r/3Dprinting • • 17h ago

Project This is what 3D printing is all about. Going from Frosty the Snowman to Frosty the Swoleman

Thumbnail
gallery
50 Upvotes

I’ve been inspired to continue designing a snowman workout series from here. Next up will be Frosty the Runman


r/3Dprinting • • 3h ago

Free Model I Made this JetEngine nozzle for my Wolfbox MF200 - a Venturi nozzle that pulls in room air. Ran it through CFD Simulation before printing

Thumbnail
gallery
37 Upvotes

I wanted a nozzle for my Wolfbox MF200 that moves more air without losing push, so I went down a bit of a rabbit hole.

It's two parts. The core clicks into the duster and squeezes the fan's air into a tight 19.5 mm jet. The shroud twists onto the core, and that jet drags room air in through the 8 vanes at the back. Both streams mix in a 29 mm tube and leave the tip together.

Before printing anything I ran it in CFD (OpenFOAM, same fan curve every run) and compared the core on its own against core + shroud:

- +36% air leaving the tip

- +24% at 5 cm

- +15% at 15 cm, +8% at 30 cm

- push basically unchanged (232 g vs 238 g in the sim)

- the fan even works against a bit less back-pressure with the shroud on.

Quick honesty bit: a venturi can't add push. Momentum is momentum. What it adds is volume, so you move more air with the same thrust, and the gain is biggest up close where you're actually dusting. I'll run proper scale tests on this version and post them.

Other stuff I cared about:

- 1° taper on the mount so it presses in and seals, plus the bayonet click

- 30° twist-lock between core and shroud. Clicks shut, no tape, no rattle

- One plate. Core prints bayonet end down with supports only under the centre hub, shroud stands on its tip with no supports

- Profiles for every Bambu printer at 0.16 mm. Mine's gray ABS on a P1S, PLA works fine too

Video of it on a pile of leaves is in the comments. Happy to answer anything about the CFD or the design, and if you print one I'd love to see it.


r/3Dprinting • • 2h ago

Print (model not provided) One month into 3D printing

Thumbnail
gallery
32 Upvotes

My company gifted my a Bambu A1 after my wedding (yeah I'm never going to leave this place) and it's been a blast.

I've always been into propmaking and this thing litterally made my dreams come true.

That's it. That's the post.


r/3Dprinting • • 9h ago

Hardware Saying goodbye to an old friend

Post image
25 Upvotes

I have finally retired my Ender 3. Photo taken after I ripped off all the stuff I’m keeping. Served me well(ish) for thousands of print hours. I upgraded a few years ago, but kept this guy running out of nostalgia for everything it taught me about the hobby that has now become my job. I love you. Kinda hate you. So long and thanks for all the prints.


r/3Dprinting • • 20h ago

Question Best software to learn CAD as a 3d printing novice

22 Upvotes

Last few months have been a blast.

Went from an Ender 3 and no idea what I was doing to now two enders, fully modded and buying a QIDI q2 in a few days.

I've been using ai mostly to develop and iterate on ideas but I'd like to gain alot more control over what the models end up like.

I have an hours worth of experience in blender, but that was mostly for animation so I'm unsure where to start with the whole 3d modelling thing.

Any suggestions on free software or any other advice is truly appriciated

Edit: Thank you for all the responses. I'm gona check out all the softwares and watch alota videos on them and see what clicks with me. Thank you!


r/3Dprinting • • 23h ago

Project Metal Rods added to 3D Printed Blocks

Thumbnail
gallery
19 Upvotes

I have been working on a way to add more strength to my 3D printed MADOS blocks and I have settled on using M8 threaded rods.

Here you can see a few photos of how this works. I have 3 different blue connector pieces that all work with M8 rods and bolts.

The rod in these photos is 300mm long bought on Amazon. Other standard sizes like 400mm and 1m are also widely available in the UK.

I chose M8 because it's much stronger than M6 and for me it's much cheaper than M10. Plus it works well with the 20mm MADOS block system.

I haven't done any strength testing yet but I think this could be a way to make much stronger structures out of 3D printed building blocks and also help with things like PLA creep (or other materials could work better with it).

It might work for small items of furniture, engineering projects, making custom enclosures etc.

The only thing I have designed so far is a small trolley on wheels but that didn't use rods, it just used the blocks.

Next I need to figure out how to attach wood or acrylic panels to it.

All these parts are single-filament. They are all made from PLA.

Designs are free and Open Source with STEP files on my Printables page: Printables Page

Youtube video explaining the block system: Youtube - MADOS Block System


r/3Dprinting • • 9h ago

Discussion Anyone change from PETG to PCTG?

15 Upvotes

I don't actually print much in PETG. I keep a spool of transparent PETG around as it's a great support interface material, and it's semi-useful in printing things that I want translucent or need just a touch more flex than PLA. It seems that PCTG has a lot of the advantages that PETG has and then some: better impact resistance, slight flexibility vs PLA/ASA, UV resistance, and better transparency. PCTG is a bit more expensive ($30/kg for 3dfuel) but since this is more of a specialty filament, the price doesn't bother me. I wonder if PCTG would be better than PETG for supports with since it is still a dissimilar material, but may have just a touch more grip than PETG. PETG releases from PLA like a dream, but I've had a couple of print failures where the model detached from the supports.


r/3Dprinting • • 2h ago

Project My sea dragon sculpt, digital and printed versions

Thumbnail gallery
15 Upvotes

Here’s a sea dragon I sculpted in Zbrush, 3D model and printed version. Pretty happy with how the head and fins came out, I wanted to give it an aquatic dinosaur look, like Elasmosaurus. Some say it looks like Lapras, but I don't give them too much credit haha. There are 2 narwhals alongside the dragon, in the base.

It’s one of the dragons from Nemesis Dragons: Sovereigns 2, a collection I’m working on for an upcoming Kickstarter I'm working on. I wanted to share the finished miniature it here, but you have all information in my profile if you like this project.