r/3dprinter • • 13m ago

3D Printer suggestion[beginner]

2 Upvotes

Hi everyone - my 5 year old son has really shared an interest in 3d printing

I am looking for a suggestion or a starting point on where I should start with this.

I don’t want to spend a huge amount of money I had a price range of 200 to 300 euro in my head as a gauge(please correct me if I’m delusional with this budget)

Google gives me so many suggestions but nothing is really narrowed down for me.

Ideally I would like something not so difficult to set up. The prints will be very basic I suspect and if he really enjoys it we can make upgrades along the way.

Thanks in advance for the help.


r/3dprinter • • 31m ago

3D Printer for a 10 Year Old. Where Do I Start?

Thumbnail reddit.com
1 Upvotes

My 10 year old son has been asking for a 3D printer for Christmas, and I honestly know next to nothing about them.

I’m looking for something beginner friendly, easy to use, and that he can grow into. I don’t mind spending a little more for something worthwhile, but I have no idea which brands or models to consider.

Any recommendations or advice from those with experience, especially parents, would be greatly appreciated. Christmas is coming up fast, and I have no idea where to start!

Thanks!


r/3dprinter • • 1h ago

Budowa drukarki

1 Upvotes

Siema. Zastanawiam sie nad budowa drukarki bo mam czesci od ender3v2 i anycubic i3mega s, plyte mks robin nano v3.1 z sterownikami tmc2009 i też plyte skr mini e3 i mniej więcej wiem co I jak ale chciałbym zrobic osobna jednostkę zasilająca sterującą jak to jest w którymś modelu. Pytanie brzmi jakich kabli używaliście lub używacie do stworzenia takiego wynalazku.? Moze macie jakieś rady lub linki odnosnie budowania takich maszyn z chęcią przyjmę rady i pomysły.


r/3dprinter • • 1h ago

What percentage of Isopropyl alcohol concentration should I get ?

Thumbnail reddit.com
1 Upvotes

r/3dprinter • • 2h ago

Getting spiderweb stringing on my CR-6 SE, how do I fix this?

Thumbnail
gallery
2 Upvotes

How do I get rid of these fine cobweb strings? i tried changing the retraction but it doesn't help!


r/3dprinter • • 2h ago

Firmware para Cube generacion one y two

Thumbnail reddit.com
1 Upvotes

I don’t understand how you can fail to share something so important to the owners of the Cube printer—a product that has been discontinued, leaving its users stranded, unable to use their machines due to a lack of filament cartridges and with no updates to keep their hardware functional.


r/3dprinter • • 2h ago

Recommended small printer with enclosure

2 Upvotes

At my new place I had to move my Core One to the storage room, where I can’t access it as convenient as I would like to.

So I’m considering to buy a 2nd printer, a small one, which I can use in my room (limited space) but for that I need one with an enclosure for air filtration.

Which one would you recommend? I would be happy to buy Prusa Mini but that is years old and expensive. A1 Mini seams nice and cheap as well, but I don’t want tent enclosure or building a custom one which i have to maintain. I’m not familiar with other brands like Flashforge or Elegoo.

Thanks!


r/3dprinter • • 3h ago

I designed a 3D-printed push-to-open click latch mechanism using a pen spring - I’ve already sacrificed every clicky pen in my house for 3D prints, any left in yours?

Thumbnail gallery
6 Upvotes

r/3dprinter • • 3h ago

Bambu Lab H2D

1 Upvotes

I am looking to buy this printer. I am a beginner and don’t know a lot about software but I’m sure I can figure it out. Can anyone tell me what the learning curve will be between the software and the machine itself? Any advice would be greatly appreciated.


r/3dprinter • • 3h ago

Beginner

2 Upvotes

I’m looking into which printer I should get it would mostly be used for my sons birthday party like centerpieces and such his 5th birthday is august 2027 and it’s Pokémon them I was thinking of printing Pokemon balls with opening on top like planter for centerpiece and other goodies so possibly a multicolor printer which one would be best for someone that’s never used one before and just starting out

Thank you send me your recommendations please :)


r/3dprinter • • 4h ago

My first 3D Design Christmas Ornament

Post image
2 Upvotes

Hey everyone!

With Christmas coming up, I wanted to share my very first 3D design!

I recently designed and printed this snowflake ornament on my Bambu Lab P1S. It was quick and easy to do im happy with how it turned out!

If anyone wants to give it a print, here’s the MakerWorld

link:
https://makerworld.com/models/3636323?appSharePlatform=copy

I’d love to hear your feedback or see pictures if you print one!

Happy printing! 🎄❄️


r/3dprinter • • 4h ago

Printer recomendations ?

0 Upvotes

Looking to buy a 3d printer for printing and not repairing it , few years ago i had artilery sidewinder x2 , was a nightmare

Im looking mainly at bambu lab a1 combo , as my budget is maxximum 350€

Simple prints , click and forget type , looking at bambu because it has a camera and everyone seems like have one , any recomendations for no brainer ??


r/3dprinter • • 5h ago

50$ 3D printer

Thumbnail
gallery
6 Upvotes

i bought this 3D printer for 50$,and it have some problem like the extruder cover broken and dead PSU so i bought a 13$ 360W psu from my local store and glueing some plastic and use rubber band to pull the small bearing i salvage from an old spinning fishing reel, and printing quality is kinda mid not too good or bad, but more importantly it's a working 3d printer for 63$


r/3dprinter • • 6h ago

Paid for a Prusa CORE One, never received it. Prusa says it's not their problem!

Thumbnail reddit.com
2 Upvotes

r/3dprinter • • 7h ago

3d printer

Thumbnail reddit.com
1 Upvotes

r/3dprinter • • 7h ago

Thanks for the reccomendations! This is my third print! First was tools, second was a fan deflector, I had some stringing on the first...added the deflector no stringing on this print!!!! 🫠 its so close to being done its killing me 😂

Post image
3 Upvotes

r/3dprinter • • 9h ago

What the heck is this noise

0 Upvotes

Been at work for the last 4 days, came home and started a print and now my printer sounds like a rattle gun


r/3dprinter • • 9h ago

Filament out of stock

0 Upvotes

I live in the UK and the 7-color filament is out of stock until at least early December.

Is there any third-party replacements on Amazon that would work with the Ugee Funbox?


r/3dprinter • • 10h ago

Erster Drucker, brauche Rat

0 Upvotes

Ich bin aktuell auf der Suche für einen 3D Drucker für so Organizer in Schubladen, und so ein Kram. Ein- oder Mehrfarbig ist noch offen, vielleicht auch erstmal einfarbig und dann später mehrfarbig. In Aussicht hab ich aktuell folgende 3 Drucker, hat da jemand Erfahrungen mit?
- Bambulab A1 für 239€ (oder mehrfarbig 339€)
- Anycubic Kobra X für ca 280€ (mehrfarbig ohne Trockner)
- Anycubic Kobra 4 für ca 200€ (einfarbig aber erweiterbar mit so einem Trockner)

gerne auch Reddit Posts die die gleiche Frage stellen verlinken oder so. Vielleicht hab ich die übersehen.

Zusätzlich würde ich mich für laufende Kosten interessieren (Strom, Filamentverbrauch) und auch sonstige Tipps für den Einstieg (z.B. empfohlener erster Druck für Qualität, Sonstige hilfreiche Sachen, Wie lagere ich filamente idealerweise und so)

Vielen Dank im Voraus :)


r/3dprinter • • 10h ago

New to resin printing and need recommendations.

Thumbnail reddit.com
1 Upvotes

r/3dprinter • • 12h ago

AMS 2 Pro Diagnostic Swap Test Procedure

Post image
2 Upvotes

Was told to carry out this procedure to troubleshoot my printer issues but I am stuck at step 3. How do I physically swap the left and right side?


r/3dprinter • • 12h ago

Asking for your 3d printing photos

0 Upvotes

Hi all! I'm Matteo (aka justwhitee), on my spare time I am working on Spaghetti 🍝, a self-hosted hub for FDM printers (queue, timed starts, fast slicing, notifications and much more). I want to release it ASAP and for free.

There are still things I really want it to do, in particular

- check the camera before a scheduled print starts, so it never prints on top of a leftover part (this is helpful for scheduled printed).

- catch failures while printing.

To make this work on any printer (not just mine or similar) I'm planning to train two small open models that run even on a Raspberry Pi. They need variety: different printers, cameras, plates and lighting. So if you have a minute, I'd love some photos from your printer setups!

Here is exactly what I am looking for (but that's almost everything)

- empty beds (the most useful, any plate: textured PEI, smooth, glass…)

- beds with a finished print or leftovers on them (also just supports and brim are good)

- prints in progress that are going fine

- failed prints: spaghetti, detached parts, blobs (yes, your worst moments are gold here 😅)

Shots from the printer's own camera or a webcam pointed at the bed help the most, but phone photos are welcome too.

👉 Here the link

To upload you don't need an account and to fill the form you need just 30 seconds.

A few notes:

- photos are resized and stripped of metadata (EXIF/GPS) in your browser before sending

- please no people or personal stuff in frame

- there's a short licence checkbox so I can use them for training and, later, an open dataset

I'll share the models and the dataset when they're ready, and also spaghetti itself! Stay tuned on my GitHub and Hugging Face pages (you can find them here)!

Thanks a lot, every single photo helps (even one)! 🙏


r/3dprinter • • 13h ago

Ayuda la anivelacion automática sale toda mal

Post image
1 Upvotes

Hola necesito ayuda con esto, soy nuevo y no se cómo ayudar a la anivelacion, no es cuestión de mi mesa ya que antes estaba perfecta pero de repente la nivelación empezó a salir mal, le quite la camilla y la volví a poner y ahora está peor

Y no puedo modificar los valores por qué no avanza de ahí ya que detecta que está mal y vuelve a nivelar pero sale mal y es un círculo


r/3dprinter • • 13h ago

P1S or P2S ?

0 Upvotes

My first 3d printer ever , I just got the p2s but I did not open the box yet and I’m having second thoughts if I shoulda went for the P1S