r/986Boxster • u/CorgiSplooting • 22h ago
Anyone have STLs of the speed humps?
Now that my resin an FDM printer capable of printing ASA are dialed in I kind of want to make these.
r/986Boxster • u/CorgiSplooting • 22h ago
Now that my resin an FDM printer capable of printing ASA are dialed in I kind of want to make these.
r/986Boxster • u/GasterBla • 2d ago
Hello everyone!
The right-hand display on my 1999 Porsche Boxster 986 (the one showing the time and oil level) has stopped illuminating.
The LCD itself still works perfectly: I can see the information when I shine a flashlight directly at it, so it’s just a burned-out backlight bulb.
Does anyone know which bulb I need to replace? Does it use the bulb with the black base or the beige base?
Any help or advice would be greatly appreciated.
Thanks!
r/986Boxster • u/CorgiSplooting • 4d ago
Printed in Elegoo Tough resin on a Phrozen Mighty 8k.
I was into 3d printing years ago but stopped due to other hobbies. The baskets (and some other parts) gave me the perfect excuse to jump back in. I bought a used resin printer setup and even picked up a new FDM printer that is big enough to print these as a single piece and enclosed so I can do it in ASA.
These look amazing though. I love that you can’t see layer lines with resin. Unless I have massive issues with gluing these together I think it’s the way to go.
r/986Boxster • u/LawLow8586 • 5d ago
r/986Boxster • u/Frog_With_Pasta • 6d ago
I have a weird phenomenon, if i open the driver door fromthe outside (lhd), the window takes a second before dropping down that cm, from the inside it's immediate. Passenger its immediate both ways. Also different problem, when opening the top, they are supposed to drop downlime 1/3 of the way, sometimes they do immediately, sometimes afted 2-4 seconds, sometimes immediately but al lthe way down... wth \^\^
r/986Boxster • u/yuccaknifeandtool • 6d ago
Finally got around to some maintenance. Replaced the IMS and RMS. Figured I'd replace the emblem too. Love the new look!
r/986Boxster • u/Pretty_Cat_3736 • 6d ago
Afternoon ones caught my eye at the classic show, and the prices for a decent 987 still look mad when the 986s are climbing too. I've got the garage skills to strip suspension or do brakes myself, that bit doesn't worry me, it's the bore scoring, IMS and RMS stories that stop me reaching for the wallet. How much do those early Boxsters actually cost a year once you're doing the spannering yourself, and is the 987 the safer bet if I ever did take the plunge?
r/986Boxster • u/Takemehomecountryrd • 7d ago
Hi Guys,
I am chasing my tail finding this central locking issue. Ive changed out the dome light assembly, changed the passenger door actuator, but it still will not lock with the fob. Double beep every time unless if I reset the battery by disconnecting it then reconnecting. Then the car will lock fine once or twice, then the gremlin comes back!
I have an aftermarket stereo, the durametric is reading “open” on the radio connection. Is this the problem child? Or is it perhaps the drivers lock actuator?
The windows drop on either side of the car when you open the door handle.
Trunk and frunk read closed on the durametric.
I don’t know where to go next. I’ve tried insulating the radios blue and orange ground wire, and also have tried grounding it to a screw in the stereo. Nothing seems to work.
Please help! What other data can I provide for this issue? Alarm module area under the seats feels dry, too.
Thank you all for your expertise.
Edit: it’s not the door because if i leave the trunk or frunk open, the door locks fine and only beeps once.
r/986Boxster • u/425-Flex • 8d ago
Found oil leaking from this area. Would anyone know what oil leak issue this is referred to as so I can try and fix it? Thanks!
r/986Boxster • u/ianmpgh • 9d ago
Like the title says, I’m dealing with an extremely annoying rattle coming from the convertible top assembly, specifically towards the front of the assembly where the soft top meets the windshield. Happens over bumps and minor undulations (so all of the crappy pavement in my city triggers it). Trying to diagnose where the rattle is coming from has me thinking it’s from within the area between the plastic assembly and the soft top canvas. How DIY-able is it to access this area if I’m a total newbie? And what should I be looking for?
r/986Boxster • u/ShallotFit3913 • 10d ago
I attempted to repair the rips and cracking on the side bolster of my 2001 boxster s today…. The rips are fixed but this color match kit didn’t really match well at all. I got it from leather world technologies I think they also sell a kit to adjust the pigment of the dye (might do that at a later date). Any tips on how to fix this I’ve never done this before it I think it shows a bit hahaha
r/986Boxster • u/Ok-Anteater-5526 • 9d ago
I am trying to get my 986 ready for smog test. How do I complete Catalyst sensor & Oxygen sensor in I/M readiness? I have no faulty code.
r/986Boxster • u/Severe_Fan7634 • 12d ago
Admittedly, I recently put some cheap rotors and pads on my Boxster S about 8-9 months ago. I don't drive the car very much. Mostly just a weekend cruiser and figured...maybe i'll save the money. Although I don't feel any difference in brake feel from OEM (probably because I don't drive the car very hard), today, I drove the car in some rain and when i finished my drive, I noticed terrible surface rust on the rotor hub that just looks super ugly.
The cheap rotors I got are an uncoated Dynamic Friction vented rotor. I probably should have known better.
But curious from the community here, should I spend the extra money to swap them out with OEM rotors? Think I might also swap back to the OEM Textar pads as well. If not OEM, is there another OE kind that I could consider that have been great for others? Maybe the Zimmermann rotors?
It's mostly an aesthetic thing for me as I know this surface rust on the hub is going to drive me crazy.
r/986Boxster • u/FirefighterNo2241 • 15d ago
Hey everyone,
I have a 2004 Porsche Boxster 986 with the 2.7L engine and 5-speed manual transmission. I’ve been having a strange issue with reverse gear that’s gradually gotten worse, and I’m wondering if anyone has experienced something similar.
The weird part is how random it is. Sometimes reverse engages perfectly fine, like nothing is wrong. Other times, it feels like the shifter hits a solid wall and physically won’t go all the way into gear.
When this happens, it doesn’t feel like the shifter is fully engaging or clicking into position. Sometimes it’ll grind slightly when I try to put it into reverse. After messing with the shifter and trying a few times, it’ll eventually go in.
Earlier today, it was particularly stubborn, and I actually had to use both hands to get it fully into reverse.
A few important details:
All five forward gears shift perfectly fine, without resistance or grinding.
The issue is completely random. Reverse might work perfectly several times and then suddenly refuse to engage.
It happens even when the engine is completely turned off.
When it refuses to engage, it feels like something is physically blocking the shifter.
The problem has gradually become more frequent.
I’m wondering if this could be caused by worn or misadjusted shifter cables, linkage, or something with the reverse gear mechanism itself.
I’m really hoping this isn’t an internal transmission problem, especially because I rely on the car to get to work.
Has anyone experienced this on a 986? If so, what ended up being the issue? Is there anything specific I should check before assuming something is wrong internally?
Any advice would be appreciated. Thanks!
r/986Boxster • u/CorgiSplooting • 16d ago
Nephew came and helped. I need a garage though. It’s already too cold here in WA.
r/986Boxster • u/SamNeedham123 • 16d ago
Last proper trip for my 986 this year with a very damp and foggy drive to the Peak District, stopping for a quick photo opportunity on the famous Snake Pass.
The car will be partially off the road for the next 3 months, with the worst of the winter weather in force. Got some important jobs to tick off before the spring.
r/986Boxster • u/Internal-Contract735 • 17d ago
Hey all, potential first time Boxster owner here, looking into buying this 986.
Badge on the car says Boxster S but a quick spec check says 24v, could someone please confirm?
Owner says it says has the tiptronic s transmission, which is why it has the badge, any help would be appreciated!
Reg is X9 XXA
r/986Boxster • u/jrallan26 • 17d ago
It’s been one year of owning my 986.2 Boxster. It’s been a great car. I’ve had a great time meeting people. When driving it I always get a thumbs up. Next thing is acquiring a hard top and repainting the bumper covers.
r/986Boxster • u/Actual-Journalist-69 • 16d ago
I have an 01’ 986S and I’m planning to start autocross and hpde with it this next season. I have bucket seats but do not have a roll cage or harness bar to safely install a harness and arm restraints (for nasa). That in mind, will the soft top hold up to hpde levels 1 and 2 track speeds? I’m in the northeast so looking at Watkins Glen, Thompson, Lime Rock, NJMP and Palmer.
My soft top is original and as it came from the factory 25 years ago. It functions normally and only thing wrong with it, is it has the plastic window.
If I make it past HPDE 2 then my plan is to spring for a hardtop.
r/986Boxster • u/CyberAkatsuki • 16d ago
r/986Boxster • u/Eggs_4_Breakfast • 17d ago
Does anyone know the color code for the intake vents on the concept car? The side and grill vents.
r/986Boxster • u/CorgiSplooting • 17d ago
It’s separate from the fender liner.