r/AndroidTVBoxes • • Jun 30 '26

Subreddit back up

11 Upvotes

Because there was no mods, the sub went into restricted mode the past ~5 months.

Everyone should be able to post now.

Since the subreddit is kinda small, just don't be an ass or post spam/super low effort


r/AndroidTVBoxes • • Nov 15 '16

Welcome to /r/AndroidTVBoxes

28 Upvotes

I created this subreddit as I was looking for a decent place to build a community of AndroidTV users and fans, but the only subs I could find were purists that only accept 2 or 3 devices as being AndroidTV. The way I see it is AndroidTV is Android with a TV Launcher. Cheap Chinese boxes have got to a state of being well speced with a good variety of Launchers and configurations. I hope this becomes a place where people can discuss the best AndroidTV boxes and the best setups. So welcome, and speak up.


r/AndroidTVBoxes • • 7h ago

Android TV box

4 Upvotes

Is there a regular Android firmware I can put on my Tanix box instead of the Android TV OS version? I’d rather use standard Android since I rely on a Bluetooth mouse for navigation. the annoyance with that is when I install a streaming app, it detects the android TV OS version and enables remote controller navigation, making it impossible for me to use the mouse.


r/AndroidTVBoxes • • 14h ago

Need a Universal Bluetooth Remote

2 Upvotes

Is there a Universal Bluetooth Remote that works with all Android and Google TV and even laptop? #AndroidTV #GoogleTV #Remote #India


r/AndroidTVBoxes • • 14h ago

I made a free, open-source Android TV browser where your phone is the trackpad, keyboard and webcam

Thumbnail gallery
2 Upvotes

r/AndroidTVBoxes • • 20h ago

Made a cozy night filter for TV boxes and projectors, controlled from your phone or the remote

Post image
4 Upvotes

Hi, I'm the developer, so this is self-promo, but it's free and

open source.

I watch stuff on a projector at night, and every filter app I

tried had the same problem: when you change the values, the app

restarts and the screen flashes full white for a second. Not

great in a dark room.

So I wrote my own. MidnightBeam draws a warm, dimmed overlay on

top of everything (video included), and changes apply right away,

no flash. You can control it:

\- from your phone: the Android app, or just scan a QR code on the

TV and a remote page opens in any phone browser (iPhone too), no

install needed, local network only

\- with the TV remote (the settings screen only needs the D-pad

and OK)

\- over adb, if you like scripting

It also has a daily or weekly schedule that the TV runs by itself

(e.g. warmer and dimmer after 22:00), and it restores the last

setting at boot.

It's about 350 KB, MIT licensed, no tracking, and it's on

F-Droid. Android 8.0+.

Overlays behave a bit differently on some boxes, so if it does

something weird on yours, tell me which device you have. There's

an issue on GitHub collecting device reports.

GitHub: https://github.com/MadeinTaly/midnightbeam

F-Droid: https://f-droid.org/packages/dev.midnightbeam/


r/AndroidTVBoxes • • 1d ago

Title: Help needed! TP.SK518T.PB816 Cloud TV stuck on boot screen – Need USB recovery firmware or factory reset method

2 Upvotes

Hi everyone,

I have a 32-inch Smart TV running Cloud TV OS (Android 11), with the following configuration:

Hardware and firmware details:

\- Motherboard: TP.SK518T.PB816

\- RAM: 1GB

\- Flash storage: 8GB

\- Firmware version: 20241008_201956

\- Checksum: 20241008_201956

\- OCS: 24150907

\- Device version: FC

\- Wi-Fi: AIC8800

\- Bluetooth: AIC8800D

\- Firmware upgrade filename shown in System Info: "allupgrade518_an11_8GB_1GB_jef68.bin"

\- Panel ID shown as "-"

The problem:

My TV was working normally with TV Town Launcher. I installed Netflix 9.27.1 and TV Bro using ADB. I also disabled Open Browser and some Cloudwalker/demo applications.

Everything was working fine until I switched the TV off and turned it on again.

Now it gets stuck at the boot screen:

"INTERNET TV – POWERED BY CLOUD TV OS"

The launcher never loads. I have tried unplugging the TV and restarting it, but nothing has helped.

What I have tried:

\- Power reset

\- Holding the physical power button while reconnecting power

\- Trying a blank FAT32 USB drive

\- Attempting to enter recovery mode using the single physical power button

None of these worked.

What I need help with:

  1. Is there a way to enter Android Recovery or Bootloader mode on this TP.SK518T.PB816 board using its single physical button?
  2. Is there a USB recovery method to perform a factory reset?
  3. Does anyone have the exact stock firmware matching "allupgrade518_an11_8GB_1GB_jef68.bin"?
  4. What is the correct USB flashing procedure for this exact 1GB RAM / 8GB storage configuration?
  5. Could disabling Cloudwalker system packages have caused the launcher or boot process to fail?

I have a 32GB USB drive and a Windows laptop.

I can provide pictures of the factory System Info and SW Upgrade menus.

Please help me recover this TV without replacing the motherboard. I want to avoid flashing incompatible firmware.

Thank you!


r/AndroidTVBoxes • • 18h ago

I made Channelbox – a free, open-source IPTV player for Android TV that works like a cable box

Thumbnail gallery
0 Upvotes

r/AndroidTVBoxes • • 1d ago

Trinity 2.20 is out on Android and the Apple App Store (new Live TV list, tennis & more soccer, rewind live)

Post image
2 Upvotes

r/AndroidTVBoxes • • 1d ago

Repurpose Jio STB

Thumbnail gallery
3 Upvotes

r/AndroidTVBoxes • • 1d ago

Nuvio KE 1.2.0: trailers play right in the poster card, plus more

5 Upvotes

Nuvio KE is my free, open-source fork of Nuvio for Android TV: a Stremio-addon media app tuned for 4K remuxes and lossless audio, built for my family's Shield.

What's new in 1.2.0:

  • Trailers in the card: rest on a poster and its trailer plays in the card, then grows into a big panel with sound. Turn it on in Settings › Layout › Home › Trailer › In the card
  • Live TV rides out network drops, plays more streams, shows guide logos and switches to 50 Hz for 25/50 fps channels
  • Resume starts 5 seconds back so you catch the last line. Set 3 to 30 seconds or Off in Playback settings
  • Subtitles: every line of Blu-ray (PGS) subs, Vietnamese, Greek and Cyrillic with libass, and 13 more scripts on mpv
  • Network: access headers for protected servers, private DNS, and an option to hide source names
  • Test releases: an opt-in switch to get new builds before everyone else

Already on KE? The app offers the update. New here: https://github.com/Arshad-Kamal/Nuvio-KE

Downloader Code: 7696551


r/AndroidTVBoxes • • 1d ago

Need Advice: Best Media Player for 4K Blu-ray Remux Playback Directly from External HDD?

2 Upvotes

Good evening, everyone! I could really use some advice because I'm completely lost when it comes to choosing a media player.

I'm not someone who regularly watches movies on Netflix or other streaming platforms. I usually download movies from YTS and other sources, store them on an external hard drive, and watch them directly on my Google TV. A few months ago, I fell down the Blu-ray Remux rabbit hole and decided to upgrade my movie collection. I bought a 2TB external hard drive and started downloading Blu-ray Remuxes and full Blu-ray rips. Unfortunately, that's when the problems began.

Most of these movies either refuse to play or make my TV freeze completely. When I use VLC, I get black screens, stuttering, choppy playback, audio dropouts, or sometimes no audio at all. I later realised that many of these files come with different audio formats such as DTS-HD MA, Dolby TrueHD, Dolby Atmos and so on. Apparently, my TV's built-in media player isn't equipped to handle everything properly.

After doing some research and getting a better understanding of the situation, I've come across several dedicated media players, including

  1. NVIDIA Shield TV Pro
  2. Dune HD Pro Vision
  3. Zidoo Z9X 8K
  4. Ugoos AM6B+

I'm now considering investing in one of these devices, but I'm struggling to decide which one would be the best choice.

What I'm looking for is pretty straightforward:

I want to connect my external hard drive, browse my movie collection, select a Blu-ray Remux and play it directly without having to worry about compatibility issues, stuttering, black screens or audio problems. I don't really care about 8K output or streaming apps. 4K playback is more than enough for me. I just want a reliable, hassle-free plug-and-play experience with proper video and audio support.

For those of you who own these media players, which one would you recommend? Is it worth spending more on Dune, or would Zidoo be more than sufficient? And how does the Ugoos compare? I'd really appreciate some genuine advice from people who have experience with these devices. Thanks in advance.


r/AndroidTVBoxes • • 1d ago

I made a player for Android TV boxes that plays your NAS, USB drive, Plex, Jellyfin or Emby in one app

2 Upvotes

I made a video player for Android TV boxes that plays your own stuff from wherever it lives: a NAS or a computer share (SMB or WebDAV), a USB drive, or a Plex, Jellyfin or Emby server, all in one app. Thought this sub might find it useful since a lot of you run cheap boxes with odd codec support.

The bits people usually care about on boxes: it decodes DTS, DTS-HD, TrueHD and Dolby Digital itself when the box can't, so files that play silent elsewhere have sound. Dolby Vision profile 5, which is common, plays with the right colours in SDR on boxes with no Dolby Vision chip, instead of green and purple. And when the box's own player can't handle a file (AVI, VOB, Blu-ray ISOs, weird codecs), it hands it to a second, libVLC-based player on its own.

Setup without the remote: the TV shows a QR code, you scan it with your phone and type the NAS address and password there. It also has a small demo library of open films so you can try it before adding anything.

It's free for one source. Pro is a one-off payment (no subscription) for more sources, sync between devices and a few other things, with a 7-day trial in the app. Apart from that demo library it provides no content, it plays what you already have.

Install on the box with Downloader and this address: player.yonto.app/tv

Website: https://player.yonto.app/?utm_source=reddit&utm_campaign=atvboxes-202611

I'm the developer, so happy to answer questions, and if something doesn't play on your box, tell me which box and what file and I'll look at it.


r/AndroidTVBoxes • • 1d ago

Emulador para TVbox

3 Upvotes

Hola, alguien tiene data de algun emulador para usar el tvbox para jugar a la PSP o Play 1 o 2? o Sega, no importa jaja.
Los que descargue de playstore no anda ninguno


r/AndroidTVBoxes • • 1d ago

Alternative launchers for Android TV

2 Upvotes

I'm trying to make my TV box run faster. I built it myself with Chinese components, so it's clearly not the most powerful. However, Android TV's resource crunch doesn't help either. Some people recommended me FLauncher or Projectivy Launcher but I'm not sure about their compatibility with other android based apps. Any recommendations or reviews?


r/AndroidTVBoxes • • 3d ago

One IPTV player for all the platforms

Post image
18 Upvotes

Hi all, I’m the developer of IPTV Deck. I built it because most players I tried felt like phone apps stretched onto a TV, and they got slow on cheaper boxes once a playlist had tens of thousands of channels.

https://iptv-deck.com/#where

Quick rundown for anyone who hasn’t seen it:

  • playlists: M3U / M3U8 (link or file), Xtream Codes, MAC portal (Stalker), JellyFin, Emby, Plex
  • guide: XMLTV, .xml or .xml.gz, and you can stack several EPG sources on top of the provider’s own
  • live TV + full TV Guide, catch-up if your provider has it, recordings, multiview (a few channels on screen at once)
  • Sports Hub
  • streams: HLS or MPEG-TS, you can switch per Xtream playlist. 4K / HEVC fine. Two player engines (ExoPlayer and VLC), the green button on the remote flips between them when a channel acts up
  • subtitles from the stream, your own files, or search OpenSubtitles right from the player
  • movies + series with posters and info, and Plex / Jellyfin / Emby too
  • profiles, kids profiles, favourites, your own groups
  • one account for everything: Fire TV, Android TV, Apple TV, phone, PC/Mac. stuff syncs, and there’s a web panel so you don’t have to type a 40 char password with the remote
  • big playlists don’t kill it, 100k+ channels on a Firestick is ok

4 days free with everything unlocked, then a sub or a one-time Lifetime.

Our community: https://www.reddit.com/r/iptvdeck/

Google Play: https://play.google.com/store/apps/details?id=com.mistykuu.iptvdeck
Box without the Play Store: Downloader code 7083371, or https://zssoftware.eu/tv


r/AndroidTVBoxes • • 3d ago

AM9 Pro in native mode

7 Upvotes

Short of installing CoreElec I'm testing out the AM9 pro using a handful of Android TV and Android apps I've become familiar with on other devices. For anonymity I have not created a Play account yet and am installing everything via Aurora store or a direct sideload. Using a bog-standard HD monitor. All display/codec settings in the box are at factory default. Results are mixed.

Downloader - works, of course

LocalNow - wants Play sign-in

MPV player - works

Nova player - works

Pluto TV - Aurora says it is georestricted (I'm in the US) and refuses to download. I haven't tried APKMIRROR yet.

Tubi TV - mostly works, but occasional black screens when exiting from a playing video.

radio.net - works

MyTuner FM - works

Roku Channel - wants Play Sign-In

SmartTube - works, though navigation is confusing,

Sirius, Spotify - holding off on services requiring sign-ins for the moment

Spectrum TV - installs, then says device is unsupported (DRM I suppose). Watch-via-web redirects to rejected app.

YouTube - works

TuneIn - works

VLC - works

Universal installer - works

Ultimate File Manager Pro - works

Libretube, TizenTube - almost every ( not all) videos launch from thumbnail to black screen (codec issue?)

New Pipe, PipePipe - almost every video never gets past the thumbnail ("source problem") popup.

TubeHaus - works

YouTube app - works

YouTube via Chrome - works

WebTube (martykan) - works. Sponsorblock has long since stopped working on this ancient web wrapper, but after that it plays videos uninterrupted. It has never failed me on any device.

I'm going to log into Play with a dummy/unconnected account which should fix some things.

The failure-to-play issues on YT clients are the most annoying. Most do not have codec selection options, if that is an issue. I do have 3 that work - sort of - but am open to suggestions.


r/AndroidTVBoxes • • 3d ago

Chromecast 4 dejó de reconocer mi TV LG para controlar el encendido y el volumen⁷

Post image
2 Upvotes

r/AndroidTVBoxes • • 3d ago

Question

0 Upvotes

Can i make my motorola edge 30 neo as an android tv box? It has a snapdragon cpu 128gb sdcard, can do up to 4k30fps i think


r/AndroidTVBoxes • • 4d ago

IPTV player for Google TV / Android TV — no subscription

Thumbnail gallery
0 Upvotes

r/AndroidTVBoxes • • 4d ago

warning!Claude blocks my request about how to get root access of my old Android TV while I utilize VS code Agent

5 Upvotes

TS


r/AndroidTVBoxes • • 5d ago

Nuvio KE 1.1.0: 20,900 free live TV channels built in, plus a pile of playback fixes

34 Upvotes

Nuvio KE is my free, open-source fork of Nuvio for Android TV: a Stremio-addon media app tuned for 4K remuxes and lossless audio, built for my family's Shield.

What's new in 1.1.0:

  • Live TV channel pack: about 20,900 free channels from many countries. Tick yours and the TV tests each one and hides the ones that don't play
  • Guide grid and a day schedule, plus more guides
  • Playback errors say what went wrong and lead with the fix, and fewer streams fail in the first place
  • mpv fallback for Hi10P anime, WMV and files your TV can't decode
  • Source filters with counts, and a preferred source per show
  • Dimmer subtitles for HDR and Dolby Vision

Already on KE? The app offers the update. New here: https://github.com/Arshad-Kamal/Nuvio-KE

Downloader Code: 7696551


r/AndroidTVBoxes • • 4d ago

Boot loop

Thumbnail
gallery
3 Upvotes

Gostaria de uma ajuda para reinstalar o sistema desse aparelho que fica preso na tela de boot e em seguida reinicia.


r/AndroidTVBoxes • • 5d ago

New Tata Play HD box connection experience

2 Upvotes

Thinking to get a new Tata Play HD box connection, before that I wanted to know your experiences with it.

I saw this offer on amazon-

https://amzn.in/d/0hl3wock

But my doubts are that

  1. Why the offer says pay 3k get 3k back, while the price it shows is 3.5k actually?
  2. Is Dhamaka offer still valid, anyone purchased recently?
  3. Did you get free service?

Lastly, from where did you purchase, Amazon only?