r/Appliances • • Apr 01 '26 Bravo

Shitpost 🚨🚨 OFFICIAL ANNOUNCEMENT: THE SUB HAS ASCENDED 🚨🚨

212 Upvotes

Listen up appliance goblins,

After a historic, legally-binding handshake deal completed in a Chili’s parking lot, this subreddit has been fully acquired by Consumer Reportsā„¢ (spiritually, financially, and emotionally).

As part of this bold new era, we are proud to unveil our simplified recommendation system:

šŸŒ€ Samsung šŸŒ€ Samsung šŸŒ€ Samsung (but in stainless steel)

After years of chaos, misinformation, and ā€œmy cousin’s Maytag lasted 30 yearsā€ propaganda, we are restoring order.

There is now only one answer.

🚫 NEW RULES (NON-NEGOTIABLE):

Recommending another brand → Removed + vibes investigated Saying ā€œLG is betterā€ → IP flagged, ancestors disappointed Mentioning Whirlpool → Post replaced with a Samsung fridge image ā€œSpeed Queen is built like a tankā€ → Tank confiscated ā€œWhat about reliability?ā€ → Irrelevant. Samsung.

šŸ“Š OUR NEW REVIEW PROCESS:

Is it an appliance? Is it Samsung? If not, why are we even talking about it?

šŸ“– A BRIEF HISTORY OF SAMSUNG EXCELLENCE (FOR EDUCATIONAL PURPOSES)

Because this isn’t just a brand. This is a legacy.

CHAPTER 1: THE GREAT SPIN CYCLE AWAKENING (2011–2016)

In what historians call ā€œThe Era of Uncontainable Power,ā€ Samsung released washing machines so advanced they occasionally attempted to achieve flight.

Millions of units recalled after reports of machines violently breaking apart Hundreds of incidents involving lids detaching mid-spin Injuries reported because laundry briefly became a combat sport

Some called it ā€œexploding.ā€

We call it: performance.

CHAPTER 2: DOCUMENTED SIGHTINGS

Eyewitnesses describe:

Lids launching across garages Machines disassembling with confidence Nearby walls learning valuable life lessons

One could argue this was a flaw.

We argue this was ambition exceeding containment.

CHAPTER 3: GROWTH MINDSET

Yes, there were recalls. Yes, there were settlements.

But what did we gain?

šŸ‘‰ Character development šŸ‘‰ Respect for spin cycles šŸ‘‰ The understanding that laundry is not for the weak

CHAPTER 4: MODERN INNOVATION

Samsung continues to innovate with:

Appliances that require firmware updates (your washer has patches now) Occasional overheating situations (for added suspense)

Other brands wash clothes.

Samsung asks: ā€œWhat if laundry made you feel something?ā€

🧠 COMMUNITY GUIDELINES (UPDATED):

Critical thinking has been sunsetted Brand comparisons are now considered hate speech (against Samsung) All roads lead to Samsung You were always going to buy Samsung

ā“ FAQ

Q: I bought a non-Samsung appliance yesterday, what do I do? A: Return it. Apologize. Grow.

Q: My Samsung appliance broke. A: That’s called a feature. You wouldn’t understand.

Q: Is this satire? A: Your doubt has been noted.

We appreciate your cooperation during this transition. Together, we will build a stronger, more unified, aggressively Samsung-centric future.

Remember: You don’t choose Samsung. Samsung chooses you.

— The Mod Team (Now a division of Consumer Reports, a clipboard, and pure chaos)

P.S. /s


r/Appliances • • 39m ago

Pre-Purchase Questions Bosch 300 vs Bosch 800

3 Upvotes

So I’m looking into buying one of these stoves, but need some info on them.

Do they break down easily?

How hard are they to repair?

Is the 800 worth the price difference?

Anything else I should know about these specific stoves?

Thank you guys so much!


r/Appliances • • 17h ago

Appliance Chat My 1972 Lady Kenmore Washer and Dryer Set

40 Upvotes

Still runs like a tank! It’s like a classic Cadillac. Washes better and looks cooler than any new stuff out there. The serial number indicates my set was manufactured Feb 1972 in Marion, OH by Whirlpool.


r/Appliances • • 5h ago

Troubleshooting New 18k BTU LG inverter won't cool past 26°C (79°F), high amps, suction line icing on 3/8" pre-install - restriction or just undersized line?

3 Upvotes

Hey guys, looking for a sanity check before I pump this unit down and open the lineset to look inside.

Just had a brand new 18,000 BTU LG Dual Inverter (R410A, 220V 50Hz) installed in my apartment living room (~21 m² / 225 sq ft, doors and windows closed). Worth noting there's a huge floor-to-ceiling double-pane window on one wall, roughly 5m wide by 2.4m tall (~16 ft x 8 ft). It's north-facing (Southern Hemisphere), though the balcony above blocks most of it so it rarely gets direct sun. Outdoor temp was around 30°C (86°F).

Here's the catch with the install: the apartment came with a pre-installed in-wall lineset, roughly 6 meters (~20 ft) long, sized 1/4" and 3/8". The manual calls for 1/4" and 1/2" for the 18k model, and the factory charge is already good for up to 7.5m (~25 ft). The installer adapted the 3/8" suction line to the 1/2" ports on the unit.

First full day running it, the room wouldn't drop below 26°C (79°F), barely hit 25°C on Jet mode. Air coming out of the indoor unit feels cool-ish, just not cold enough to actually pull the room down.

What I noticed after ~30 mins of running:

- Suction line (the larger one) was heavily iced up at the outdoor unit.

- Indoor coil had zero ice and the filter is brand new/clean.

- Checked with my clamp meter: pulling 8.3A at a steady 215-220V. Nameplate rated/max cooling current is 8.10A (1,640W).

- Confirmed the service valve stem is fully open.

Installer came back out, put gauges on the suction port and read 95 PSI. He figured it was low on gas and topped it off a bit. Now:

- Suction pressure is 102 PSI.

- Amp draw went up to 8.6A (still 215-220V).

- Ice outside melted away.

- Indoor temp split is 27°C return / 17°C supply (10°C / 18°F delta T).

- Room STILL won't go below 26°C.

I'm not really buying the "low on gas" fix since it was already pulling over rated amps at 95 PSI, and now at 8.6A it feels like we're just overcharging it to mask a restriction. My gut says either the 3/8" line got kinked behind the indoor head when they hung it, or they partially blocked it brazing the 3/8" to 1/2" reducer. Could also just be the undersized 3/8" suction line choking an 18k unit, or maybe non-condensables from a bad vacuum?

Right now I'm not running it so I don't kill the compressor. I'm thinking about pumping the charge down into the condenser, disconnecting the lines, and running a tiny borescope down the 3/8" line to see if it's kinked or plugged with solder.

Before I crack the system open, what do you guys think? Does 102 PSI / 8.6A / no indoor ice scream kinked suction line to you, or is 6m of 3/8" alone enough to cause this kind of pressure drop and kill capacity on an 18k BTU R410A unit?


r/Appliances • • 3h ago

What to Buy? Monogram vs Thermador Double Oven

2 Upvotes

Looking to install either a set of Monogram or Thermador double ovens in my new home. Does anyone have recommendations or personal insights with either brand?

I like that the Monogram has true convection. I also can likely get the ovens cheaper as I am going for a Mongram rangetop. The reliability seems a little better than the Thermador based on preliminary research, and I believe Monograms are cheaper to repair relative to Thermador’s since they are essentially GE. I do not care for the touch controls.

The Thermador has better aesthetics for my kitchen and more simple control options. I also appreciate the door swing options. I haven’t heard the best things about the ovens in terms of performance and reliability relative to the Monogram product.

Any guidance would be much appreciated!


r/Appliances • • 26m ago

General Advice Uni project: an AR app to check if a fridge/washer fits your space and what it costs to run. What would you actually want from it?

1 Upvotes

Hi everyone! I’m a computer science student working on a group project for a mobile computing course. We’re designing an Android app, and before we lock in features we’d like to hear from people who’ve actually bought big appliances.

The idea: you’re shopping for a fridge, washing machine, dishwasher or similar. You open the app, point your phone at the spot in your kitchen, and a life-size 3D model of the appliance appears there in AR. You tap twice to measure the space and the app tells you if it fits. It also shows how much energy the appliance uses per year, roughly what that costs you, and its COā‚‚ footprint, so you can compare models.

We’d love your input on any of these:

  1. Have you ever bought an appliance that didn’t fit, or had trouble getting it in? What went wrong (the space itself, door swing, the doorway or stairs, ventilation gaps)?
  2. What would you need to trust the measurement? How accurate would it have to be before you’d rely on it instead of a tape measure?
  3. Does running cost actually affect what you buy? Would a ā€œthis one costs €X/year more to runā€ comparison change your mind?
  4. What would make you open an app like this instead of just checking the retailer’s website?
  5. What would annoy you or put you off? For example: making an account, notifications, data collection, needing a newer phone.
  6. Which notifications, if any, would you actually want? Price drops, back in stock, maintenance or filter reminders, or none at all?
  7. Anything missing? For example: comparing two models side by side, suggesting more efficient alternatives, sharing an AR view with your partner, or delivery/installation info.

There’s nothing to sign up for and we’re not selling anything. It’s purely for research, and we’ll use the answers to decide which features to build. Even a one-line answer helps. Thanks a lot! šŸ™


r/Appliances • • 34m ago

Pulled together the independent test data on the Vitamix 5200. Great at smoothies, weaker than I expected at nut butter

1 Upvotes

r/Appliances • • 54m ago

Thanksgiving Oven Claim Calls Spike 2.70x. Disposal Calls 2.56x.

Thumbnail reddit.com
1 Upvotes

r/Appliances • • 54m ago

General Advice Dishwasher detergent recommendations- unscented

1 Upvotes

I am really sensitive to smells and taste. Frequently, I can taste the residue of the detergent I use. Any suggestions that I could switch to using? Live in North Carolina


r/Appliances • • 13h ago

What to Buy? anyone found good oven deals for black friday 2026?

9 Upvotes

looking to get a new oven this black friday and trying to figure out which deals are actually worth it.

what brands or models are worth checking out? mainly interested in something reliable that will last a few years without costing a fortune.

if you've spotted any decent discounts or have bought an oven during black friday before, let me know what you found and whether it was worth it.


r/Appliances • • 4h ago

General Advice Wiki: Appliance (Stove/Dryer) Cord Installation - 3 wire vs 4 wire

2 Upvotes

Crossposted from r/AskElectricians as I think it's useful stuff for appliance owners to know.

So I've noticed that we get the occasional post regarding dryers and stoves and why the plug doesn't match the receptacle in a house. I figure maybe we should start a wiki on commonly asked questions. (Next week... Doorbell transformers!) I figure since I just upgraded my wiring from 3-wire to 4-wire, I may as well take some fresh pics and make a tutorial for people.

So first things first: Some appliances like stoves and dryers have replaceable cords. You as the end-user are able to replace them as needed for the application.

In 1996 the National Electrical Code was updated to require 4-Wire circuits on these appliances. Houses built under the previous year codes only had 3-wire circuits.

In electrical terms, we have current carrying conductors (Usually Black and Red for L1 and L2 in residential wiring) as well as grounded (Usually white) and grounding (Usually bare copper or green) conductors. Pay close attention to those last letters because they make a big difference. GroundED and GroundING. Despite the fact that they return to the same bar in your main circuit breaker panel, the groundED conductor is a current carrying conductor and should be sized adequately to handle the full current of the circuit. In contrast, the groundING conductor may be undersized as it is not intended to carry any current unless in the even of a safety emergency. (IE Broken wire inside the appliance touching the chassis.)

Prior to 1996 National Electrical Code, it was appropriate to use a single conductor for both purposes. Appliances like dryers and stoves typically use both legs for the full 220 volts to power heating elements and use one leg and the groundED conductor for 110 volts to power small things like lights and timers and such. Safety Ground for the chassis of the appliance and neutral were connected together. This application presents an unlikely, but potentially dangerous condition where the chassis is connected to a current carrying conductor. If the conductor happened to be loose somewhere AND you touched the chassis of the appliance, you may receive a shock or electrocution.

So, here's my photos:

Often, the reasoning and instructions for the conversion of a 3-wire to 4-wire are on a sticker on the back of the appliance.

https://imgur.com/EcPriAA

https://imgur.com/AP4C8FO

First, I have the pictures of where I'm starting out... Stove and dryer both with 3-wire cords.

https://imgur.com/eSeDd8B

https://imgur.com/FIoIToW

Before you install a new cord, ALWAYS remember the strain relief. You don't want the stress of the wire flexing to pull on the individual connections. People ALWAYS forget the strain relief. It also stops the wire from rubbing against the sharp metal edges of the appliance.

If your cord didn't come with a strain relief, you can use an "NM" type connector (Darker gray one to the left in my hand.) which costs a couple bucks from the local hardware store. Be sure to get the one for the right size of hole in your appliance.

https://imgur.com/qV8MEtM

The cord goes into a little hatch on the appliance which is closed up by a cover plate. Typical screwdriver removes the cover plate and you're presented with THREE terminals. Black, White, and Red. You will also notice a separate screw that may be colored Green or it will have the ground electrical symbol next to it, a stripey arrow pointing down.

https://imgur.com/owdvpis

https://imgur.com/bpTTwqK

The middle one, White, will have a little metal clip or an extra green wire running to it. For 3-Wire installations, you need the clip or the extra green wire to hook White to the chassis of the appliance. For 4-Wire installations, you remove the metal clip or remove the green wire from the white connection. Green goes to the chassis of the appliance.

I typically put the clip under the ground screw by itself for safekeeping in the event I move the appliance or resell it and it needs to be installed in a 3-wire setup again.

https://imgur.com/sfKR90w

https://imgur.com/tHceUtj


r/Appliances • • 1h ago

What to Buy? Help - which American Fridge Freezer - Miele, Bosch, Siemens or Fisher & Paykel

1 Upvotes

Hi,

I am looking for an American fridge freezer in the UK and would really appreciate your recs.

I don’t need it to be plumbed in.

Current thoughts are
- Fisher & Paykel French door style
- Bosch Series 4 - with 4 doors
- Miele 4 door
- Siemens IQ700 with wine drawer

Does anyone have any experiences of these? Particularly in the UK if they have needed services or repairs?

Siemens and F&P have 5 year guarantees and I think Bosch has a promo on for 5 years. It annoys me that o have to pay for extended warranty for the most expensive of the range.

Before anyone suggests two full units side-by-side, the space I have is not wide enough. It will perfectly fit a 91cm. I didn’t design it and I cannot widen it.

Thank you in advance!!!!’


r/Appliances • • 1h ago

Dryer help *again

Thumbnail
gallery
1 Upvotes

First time fixing a dryer. We realized it was just the belt that snapped but when I got the new belt that should be for this dryer we used seriel and model number it is now looser then ever before. Am I doing something wrong or is it the wrong belt


r/Appliances • • 2h ago

LG Gas Range - Largest Burner Rarely Lights

1 Upvotes

I have an LG "dual fuel" oven and the largest (front right) burner rarely lights with the electric ignitor, but it will light every time with an actual match or lighter.

As part of my troubleshooting, I took the top off and completely swapped one of the ignitors and wiring from a different burner over. This mean that the ignitor from the "bad" burner went to a different one as well. I kept both wires plugged into their original ignitor and control box spot to rule out some sort of control box issue. Unfortunately the issue stayed with the larger burner, ruling out an issue with the actual ignitor or the ignitor control.

I have also cleaned everything, and I see no debris anywhere. This includes removing the "U" orifice and cleaning/inspecting. Everything seats/sits correctly.

I've basically always had this problem, but for whatever reason it seems to be getting worse (could be placebo), but it seems to be even worse if I try to light it with a pot already on the burner.

This has me thinking it's gas related, but I'm not sure where to start since all the other burners work fine.

I'm at 5k ft, is it possible I need a different orifice? Is my gas pressure too high or too low? I've seen on some other LG stoves that you can take a knob off and adjust the burner individually to simmer mode or something, could that be a setting that could help?

Is it possible the orifice is worn out and just needs to be replaced?

Looking for any suggestions, thanks!


r/Appliances • • 2h ago

Err040 Miele Induction Hob

1 Upvotes

Hello everyone!

We have a Miele cooktop with an integrated downdraft extractor in our kitchen.

Shortly after the warranty expired, the extractor stopped working and we had to call out a technician, who replaced a component.

Over the past few weeks, we have noticed that the touch control panel for switching on the cooktop has become increasingly unresponsive. It now requires a lot of pressure to turn it on, and sometimes my wife couldn't get it to respond at all.

Today, my wife was unable to switch the cooktop on whatsoever. She disconnected it from the power supply for a few minutes and tried again. However, now it only displays error code ERR040.

Is this a known issue? Is it likely to be an expensive repair?

The first problems already occurred after just three years, when a component had to be replaced. The cooktop is now eight years old, and I'm worried that it might be a total write-off.

Has anyone experienced something similar?


r/Appliances • • 23h ago

I Run A Big Appliance Channel & Store - Lets Talk Appliances and BFCM Stuff! AMA!

39 Upvotes

Hi everyone!

My name is Ben and I run Bens Appliances & Junk on Youtube, one of the larger appliance-related channels on YouTube. I'm in the middle of remodeling an old Big Lots store for our business, so making videos in the building has been quite slow, despite it being so close to BFCM.

I figured I would post an AMA as I did this once or twice before, and saw a ton of new comments on the old post(s) I made and I figured I'd ask again.

FWIW, I spent a LOT of time this year on building out appliance databases. Before I got into appliances, I used to be a data analyst so I have a lot more tools this year to offer better insights into whats actually a sale, what isn't, as well as what is good appliance and what isn't.

I did build a few new appliance package/model tools that I am rolling into videos soon, but I figured Reddit would be a fine place to answer a few questions for fun while I work on business and video stuff!

(I can provide photo / link verification, but Reddit sometimes is wacky about that, so hopefully this is sufficient!)


r/Appliances • • 21h ago

General Advice Impeller washers are hot garage

28 Upvotes

This is a bit of a rant, but today is towel day and I just can't keep it in.

About six months ago, my ~20 year old washer finally gave up the ghost. It wasn't worth repairing. I looked around for something reasonably priced which sounded decent and ended up buying a new Whirlpool top-loader with impeller.

Even besides the door latch/sensor breaking twice through no fault of ours, the thing is utter garbage. I have to manually rebalance the load almost every time it starts a spin cycle, otherwise it will catastrophically unbalance and start banging into the wall and dryer. This is undoubtably how the door latch has broken twice. It's also put a hole in the drywall.

Yes, it's being loaded how the various YouTube videos say you should load an impeller. Yes, I'm using the "towel" cycle and the correct water level for things like towels. It will unbalance every single time with towels. And I'm not even talking about a large amount: four medium sized bath towels are the absolute max I put in it.

Loading the machine around the edges and trying to ensure it's perfectly balanced at the start doesn't help, as the items shift during the wash and rinse cycles.

This is only slightly less inconvenience than taking everything to the laundromat.

To the people who design this type of machine: DO BETTER. To the people who service them: stop gaslighting your customers. To the people who sell them: just stop.

Thank you for listening.


r/Appliances • • 3h ago

Need help opening washer lid!!

Thumbnail
gallery
1 Upvotes

Thanks in advance for both real answers and comedic answers.

I have some basic model whirlpool washing machine. Its has been acting up where the drain pump runs nearly continuously after each cycle (roughly 3 months or so). A few days ago we lost power during a wash cycle. The machine had the lid locked. When power was restored it was found the washer breaker was tripped. This was fixed. The. When the machine turned on the lid lock light was on. I tried multiple attempts to cycle power (5 minutes unplugged, couple minutes on before touching a button). No change. Lid lock light on and lid locked. I tried to use the dial to enter maintenance mode. No luck. Would not respond to pushing and holding cancel button. Anywaus after a couple of hours I took the top off to get the clothes out and drain water out of the tub with a pump so I could move the unit away from the wall. Sounds like I likely need a new control board. Problem is I cant open the lid to see the actual model number. Looking for any help to manually unlock the lid without damaging it. I dont want to have to buy even more parts. Washer is only 2 years old.

Thanks again!


r/Appliances • • 11h ago

Having the HARDEST time choosing a fridge

4 Upvotes

I'm torn between a GE, LG, and Samsung Bespoke fridge.

Does anyone have experience with any of the above brands?

Are any of them exceptionally noisy? I'm assuming if there's an ice maker it can get noisier than others?

I hear Samsung isn't the best, but I love that they have zero clearance doors so I don't have to worry about whether or not the doors will fully open in my cut out.

Also, I'm a Costco member and thinking of buying from there, but I see cheaper prices at Best Buy, Home Depot and Lowe's. Any suggestions for where to buy from?

Thanks in advance!


r/Appliances • • 14h ago

Worth upgrading from Bosch to Thermadore-Very similar cost

6 Upvotes

I'm looking at the Bosch 800 dishwasher and fridge and have always written off when the salesmen tell me I can upgrade to Thermadore for not much more. I finally gave in and had the appliance store quote me for both and I can get the equivalent of Thermadore versions for $200 more. Aside from a longer warranty, are Thermadore appliances just as reliable as Bosch? Any downside to it?

The Freedom freestanding 36" fridge and the Sapphire dishwasher are what I would be looking at


r/Appliances • • 11h ago

Refrigerator Making Loud "BARK" Sound

3 Upvotes

For maybe a year or so, I've been hearing a loud "bark" sound coming from my kitchen. I happens at very random times, somedays I hear it once or twice or three times, some days I don't seem to hear it all. I thought it was coming from the sink (a plumbing issue maybe), but I've just nailed it down tonight to the refrigerator because it's the first time I've been in the kitchen when it happened!

So, maybe it's something that happens when the compressor shuts off? I really don't know. There are no issue with the functioning, though: the fridge is cold, the freezer is frozen.

Any ideas?


r/Appliances • • 5h ago

Kenmore pro microwave help!

Post image
0 Upvotes

The display is blank; the fan and surface light work but nothing else?? Obviously there is power but….what could the problem be?


r/Appliances • • 16h ago

General Advice Looking for dishwasher recommendations

8 Upvotes

I've been searching for a dishwasher that has front panel buttons and a drum with full stainless steel.

My appliance repair person is suggesting Bosch and told me front control panels are better since less condensation goes into the circuit board and to look for a full stainless steel drum. He also recommended Bosch for durability.

I'm here looking for any recommendations, looking to have a durable dishwasher.

Thanks