r/AskAMechanic • • 18h ago

Dropped my clutch disc should i get another?

Thumbnail
gallery
30 Upvotes

was like a 1-2 foot drop and now the copper fiber or whatever is protruding and the materials scuffed mostly on the edges


r/AskAMechanic • • 22h ago

Lower Ball Joints Pressed in? 17 Jeep Cherokee Trailhawk 3.2L

Thumbnail
gallery
17 Upvotes

Recently replaced both front struts and lower ball joints through an independent mechanic. Took it to Firestone to get an alignment, and the technician there said the lower ball joints weren’t pressed in all the way.

I sent the pictures to my mechanic and he said they are pressed in all the way and they’re good. Please take a look and let me know what you think?


r/AskAMechanic • • 11h ago

Oil changes with super low mileage?

13 Upvotes

Hey everyone,

I have a question about oil change frequency on a new Toyota 2026 Camry… I currently drive super low mileage so I know I’ll never hit the 5k or 10k limits, so I’m wondering for my driving situation if I should do 6 month changes or can still with just once a year.

I drive around 900 miles per year, that’s divided up into 2-3 days each week, with each leg of the drive only being 3ish miles, speeds in 20-40 mph just city driving some stop lights etc no highway. Live in an area that is humid and during winter lowest temps might be in high 50’s so no freezing weather.

I know I’ve read that in “harsh” driving conditions they recommend 6 months and also read some that short drives could be considered harsh if engine doesn’t fully heat up, but the mileage is so crazy low…

Appreciate your feedback!


r/AskAMechanic • • 15h ago

Is the Toyota dealership being honest about needing a timing cover reseal?

Thumbnail
gallery
6 Upvotes

Hello! I’m new to cars and took a 2015 toyota Prius from a used car dealership in to the Toyota dealer to get a pre purchase inspection. (8th digit of VIN is: U) It has 168k miles on it. The Toyota dealership stated that they found seeping around the timing cover seal, I think they mentioned it was cracking or showing wear or something, which was causing the seeping and that it may need a reseal in the future, quoted by them at $4,344. That sounded concerning. But when I asked the adviser about it, the answer went from “may need it in the future” to “will need it soon” - when I asked what soon meant he said it could be 10k miles it could be 50k miles, no way to know. Ok… no other major issues found in the report but he was discouraging me from getting the car, saying it wasnt worth the risk and asked why I didnt just get a new Toyota at the dealership instead. That made me a bit wary. Here I attached a photo that they took to show the issue, as well as a screenshot of their report log. Im not a car person so I dont know what Im looking at.

When I explained this to the used car dealership and showed him the photo he said he couldn’t see seeping around the timing cover seal and said he could kind of see it on other parts (I forget which) but that a little seeping is common for a car of this age and that it rarely turns into leaking that would need a repair. Not sure who is being more honest as I’m aware both parties are trying to sell me something lol. Most other common issues with 3rd gen priuses are accounted for (new water pump, oem hybrid battery, and brake booster) so Im not worried about that. Any thoughts, observations, opinions on the photo (or on how these things tend to go) are greatly appreciated! 🙏


r/AskAMechanic • • 19h ago

4/32” tread in the middle but shoulder completely gone? Does the car need an alignment?

Post image
4 Upvotes

r/AskAMechanic • • 23h ago

2016 Ford Mustang GT

4 Upvotes

Hello! I am trying to figure out what could be causin this?

It takes a few times for it to crank fully.

Recently replaced the purge valve. No engine light when it cranks up.

It drives PERFECT. Whenever it cranks up fully, there is also no check engine light as well..

Any input would help! I appreciate it everyone

I took the old starter off and took it to autozone and it passed the test but I’ve also heard that it could still be bad under load.


r/AskAMechanic • • 2h ago

Blower vibrating?

Post image
3 Upvotes

Hey guys! I have a 2018 Mazda CX-5 (SkyActive engine). Not on all settings, but on the two highest blower settings for the heat/air there’s a rumbling/vibrating sound. I checked the cabin filter and it seemed okay. I ran the air with the cabin filter out just to see if that helped but it didn’t. I took off the black converting for that top part and can feel the heavy vibration coming from that area. Now what?

Thanks!


r/AskAMechanic • • 21h ago

Just got a new car and….

3 Upvotes

So I got a 1997 Chevrolet Monte Carlo. $800.Super cheap for a running vehicle. Obviously stuff is wrong. Not gonna complain, however there is an issue that worries me when I drive. The rear tire squeals when going around turns. And steering is “wandery” at highway speeds. Other than that it’s fine. Any idea what would cause this? I have a road safety inspection on Friday.


r/AskAMechanic • • 1h ago

Oil leak, any idea on where it’s coming from?

2 Upvotes

2011 Honda accord 3.5
I’ve been smelling oil a bit and just noticed this. It’s also under the engine block. See comments for pic. I noticed there is some buildup around the oil cap and below it plus the area below like the radiator fan had some oil spattered around on it. Not severe, but enough for me to notice the spot on the ground approaching my car.


r/AskAMechanic • • 20h ago

2007 GMC Envoy SLE 4.2L V6 Brake line

Thumbnail
gallery
2 Upvotes

Good evening folks,

Had a brake line blow on me while driving. Looking for a replacement but I can't find any place that has the part. Saw a guy say he purchased a kit to bend the line and flare the hose but im not confident in buying a 200$ piece of equipment for 1 specific thing. Any advice would be appreciated


r/AskAMechanic • • 20h ago

2019 honda ridgeline jolts during acceleration

2 Upvotes

Any idea why my ridgeline might be jolting during acceleration...nothing much on initial takeoff or at highway speeds above 60mph. In this video it is doing it on 3rd and you can see the rpm needle bounce.

I can actually feel it like a rubber band pulling multiple times and it creates a slight lunging sensation.

Video taken with no traffic around on a county back road**


r/AskAMechanic • • 21h ago

2003 GMC sierra 1500 alignment results

Post image
2 Upvotes

How bad was it


r/AskAMechanic • • 21h ago

What could be causing my 2004 Nissan Frontier to kill batteries?

Post image
2 Upvotes

It ain't the alternator and the battery is brand new. The positive cable gets very hot. Could there be a short somewhere? Also, is there supposed to be a fuse on the positive side to prevent it from getting very hot in the first place? I just got this truck recently from a family member because he was tired of messing with it.


r/AskAMechanic • • 22h ago

2004 ford ranger 3.0 v6

Post image
2 Upvotes

Just got to the 60 range in florida and started noticing this smoke in the morning but now even when i first start my truck in after noon. I dont know what an exhaust should normally smell like.


r/AskAMechanic • • 2h ago

2011 nissan frontier 4 cylinder starting problem help

1 Upvotes

Hi, my car randomly stopped wanting to start.. what could this be? I can’t identify the sound


r/AskAMechanic • • 3h ago

2015 Acura TLX 2.4l winter wheels

1 Upvotes

What is this sound after installing winter wheels?

Tire size is 245/45/18 with Fast Wheels offset 40. Filled the air to 33 psi. This noise I’m mostly happening during turning, but when I turn the wheel I don’t see it hitting any suspension components.


r/AskAMechanic • • 3h ago

Car has check engine light on and TRAC OFF light. Went to the dealership for an oil change, came back with this. How much of it needs to be done? 2015 Toyota Corolla, factory engine.

Post image
1 Upvotes

r/AskAMechanic • • 3h ago

Acura ILX Clunking/Clicking/Thumping Noise Under Floorboard and Through Pedal

1 Upvotes

Hi all, wondering if anybody can help with my 2021 Acura ILX. It has about 40,000 miles on it.

I'm experiencing a small clunk/thump noise coming from the floorboard and being felt through the pedal. It occurs most when letting off and on the gas at low speeds, under 40mph. Also happens in quick succession, seemingly when downshifting, when coming to a stop around the 35/25mph points. Happens most aggressive when the car is fully up to temperature, but can still happen when cold. Also to note it almost NEVER happens when upshifting. Or when really punching the gas.

I know it is not a normal trait of the ILX because I just drove two more of them, both with more miles than mine. (60k and 120k) Neither had the issue. Those ones honestly felt smoother in the transmission and especially in the 1-2 gear transition and downshifting.

I did just do a drain and fill on the transmission fluid with OEM fluid so that is covered.

Wondering if anyone has ideas on what this could be.

Thanks.


r/AskAMechanic • • 6h ago

Does this serpentine belt sound normal?

1 Upvotes

2016 Micra sv with the 1.6L engine,
Just replaced the serpentine belt for the first time and can’t tell if I’ve overtightened it or not? Does it sound normal? I believe it’s somewhat to spec. Thank you for any help


r/AskAMechanic • • 6h ago

2011 BMW 328i xDrive N52 – Violent judder under acceleration, feels like transmission issue or misfire?

1 Upvotes

Recently picked up a 2011 BMW 328i xDrive with the N52 engine from an auction, around 140k miles.
When I first got the car, the check engine light was on, but after driving it around for a while, it went away. The car seemed to drive fine initially.

However, once the engine warmed up and I started accelerating harder, the car began shaking and juddering pretty badly. It honestly felt like a transmission or torque converter issue. The check engine light came back on while it was happening.
One time, the transmission also seemed to hold a gear longer than normal and hesitated before shifting.

I scanned the car and got these codes:
P0302 – Cylinder 2 misfire detected (pending)
U1167 – Scanner suggests radiator-related issue
5720 – Transmission solenoid valve power supply too low (not currently present)
55C3 – AWD transfer case limp-home control activated (not currently present)
P0456 – Small EVAP leak
A2CD / E2C4 – Undervoltage and K-CAN communication faults (not currently present)

I’m leaning toward a bad ignition coil or spark plug on cylinder 2, but the way the car shakes really makes it feel like something is wrong with the transmission.
I’m planning on replacing the cylinder 2 ignition coil and spark plug to see if that fixes it.
Has anyone experienced an N52 misfire that felt exactly like transmission judder? Could a misfire also cause the transmission to hold gears or hesitate when shifting? Or should I be looking into the transmission or xDrive transfer case as well?
Any advice would be appreciated before I start throwing parts at it.


r/AskAMechanic • • 6h ago

2021 jeep wrangler 2.0 turbo

Post image
1 Upvotes

What is this thin metal line called? It’s directly under the grill and right above sway bar.


r/AskAMechanic • • 7h ago

1998 Ford F-150

1 Upvotes

My cousin has an old ford f150 that does not start. I had a key made for it and plugged an old tractor battery in and there is the occasional flicker of dash lights. He said he had some minor work done to it and then parked it when the tail light would not turn off which kept draining the battery.

I think a new battery, alternator, starter and maybe distributor cap will tell me if it can be saved. I just don’t want to spend too much to find out it’s a dud.

The truck only has 100k miles on it. Thoughts?


r/AskAMechanic • • 8h ago

Changing rear axle, do you need press to push in bushes?

1 Upvotes

The axle bushings are connected to the mounting bracket. Do these bushes need a press to push them into place would one of the hand held (turn by ratchet presses) do the job ?


r/AskAMechanic • • 9h ago

Former/current chain shop techs & advisors (NTB, Mavis, Tire Kingdom, etc.): how does the back-end process work?

1 Upvotes

I'm trying to understand how the big chain shops actually operate behind the counter. Not asking for any internal documents, just how things work day to day. If you've worked at NTB, Mavis, Tire Kingdom, or a similar chain, I'd appreciate any insight on:

  1. Check-in: Do techs or advisors do a walkaround with photos when a car comes in? What app or system is used, and do the photos get attached to the work order?
  2. Work orders: What software runs the work orders? Does it log timestamps, which tech worked on the car, and any edits made to an invoice after it's printed?
  3. Old parts: When a customer asks to keep an old part, what's the process? Does it get tagged, bagged, stored somewhere? How long is it kept before it's scrapped?
  4. Damage in the shop: If a car gets damaged while it's in the bay, what happens? Is there an incident report form, and who gets notified (store manager, district manager, a claims department)?
  5. Warranty comebacks: When a car comes back for a problem related to previous work, how does the shop decide whether it's covered under warranty or customer-pay? Who makes that call, and how is it documented?
  6. Cameras: Do the bays have cameras, and roughly how long is footage kept?
  7. Low or performance cars: Are there rules about lift points or who's allowed to put low-clearance cars on the lift?

Thanks in advance. Any answers, even partial ones, help.