r/AskRobotics • • 10h ago

Education/Career Non-EU (Serbian) engineer with an M.Sc. from Polimi, aiming for a US PhD in robotics perception/control. Which programs are realistic, and which labs should I look at?

2 Upvotes

Hi everyone,

I'd really appreciate an honest reality check and some concrete recommendations from people who've been through US robotics PhD admissions.

Background
I'm 26 , a Serbian citizen (non-EU), based in Belgrade.
M.Sc. in Computer Science & Engineering, Robotics & Computer Vision track, Politecnico di Milano (graduated April 2026). Final mark 88/110. Thesis: a validation system for learned Stochastic Hybrid Automata models of an industrial decanter centrifuge.

Two B.Sc. degrees from the University of Belgrade, in Mechanical Engineering (GPA 8.0/10) and Information Technologies (GPA 8.23/10). My ME thesis was blood cell classification with CNNs (graded 10/10).

Current job (since June 2026): engineer in the defence sector, working on navigation and fire control. I integrate INS/AHRS units, write binary protocol parsers in C#, run sensor characterisation (drift, thermal stability, Allan variance), test GNSS aiding and GNSS-denied behaviour, and handle lever-arm and parallax corrections between reference frames. I'm also involved in autopilot and navigation work for unmanned and ground platforms, but I can't share details.

Previous job: software engineer at a research institute, working on C++ SCADA integration and traffic simulation and optimisation (METANET, CasADi).
Projects: a Vulkan 3D vehicle simulator built from scratch in C++, a single-view 3D reconstruction and camera geometry pipeline (OpenCV/MATLAB), a modular social robot from a 10-person team project (my module got 30L/30), and a CNN classifier in PyTorch.
No publications yet. I haven't taken the GRE yet and plan to. My M.Sc. was taught entirely in English.
Also a former elite water polo player (World and European Championship gold). I don't know whether that matters at all, but it's on the CV.

Goal
I want a fully funded PhD in the US focused on perception and control for mobile robots (aerial, ground or automotive; I'm flexible on platform). I'm also interested in the ML side: learning-based perception, state estimation and sensor fusion. Long-term, I want to break into US industry in robotics, ML or CV (autonomy teams, robotics research labs and so on). I see the PhD as the most realistic way in for a non-EU citizen, since getting sponsored straight from Serbia is close to impossible.
I'm planning to apply in the next cycle (fall 2027, for a 2028 start), so I have about a year to strengthen my profile.

My questions
Realistically, what tier of programs do I have a shot at? I'm thinking CMU RI, Michigan, GA Tech, Penn GRASP, UT Austin and UIUC, but also mid-tier schools with strong robotics labs. Where should I be aiming, and which should I treat as safeties?

Which professors and labs should I look at for state estimation, sensor fusion, visual-inertial navigation, aerial robotics, and perception-aware control? Labs that take international students and have a track record of placing people in industry would be ideal.

No publications: how much does this hurt me, and what's the best way to fix it in a year while working full-time? Should I cold-email professors about remote research, try for a workshop paper, or something else?

Defence background: does it help or hurt? I know some labs work on ITAR/export-controlled projects open only to US persons. Will that limit which labs can take me, and how should I describe this work in my SOP?

Is my 88/110 Polimi grade a problem? How do US committees read Italian grades?

Would going directly to a US PhD be smarter than doing a European PhD first (ETH, TUM, KIT, TU Delft) or a research assistant position, and then going to the US for a postdoc or a job?

Is the GRE still worth taking for robotics programs, given that many have gone GRE-optional?

I've attached my CV (with contact details removed). Brutal honesty is welcome. I'd rather hear it now than after spending a year and a few hundred dollars on application fees.

Thanks a lot!


r/AskRobotics • • 8h ago

Are N20 geared motors sufficient to balance and drive my robot?

1 Upvotes

Hey everyone!

I'm currently building an autonomous robot for a robotics competition and considering using N20 geared DC motors.

The approximate chassis dimensions are 18 × 20 × 25 cm. I'm planning to use four N20 motors, one for each wheel.

My concern is whether these motors will be able to handle the robot's overall weight while maintaining stability and providing sufficient torque.

A few questions:

1. Are N20 motors powerful enough for a robot of this size?

2. What RPM and gear ratio would you recommend?

3. Would four N20 motors provide sufficient traction and torque?

4. Is there any risk of the motors struggling with acceleration, turns, or uneven surfaces?

5. Would you recommend switching to larger geared motors instead?

I'd appreciate suggestions based on actual experience with N20 motors in robotics projects.

Thanks!


r/AskRobotics • • 14h ago

Can I have some advice

1 Upvotes

ok I an currently a junior in high school and I want to go to eastern Florida state collage and do their Aerospace Technology A.S. and that is a limited course and I don't know if they would accept me. I have a 2.9 GPA and I am interested in robotics and rockets (that is why I want to go and get a Aerospace degree) here is my lates project it is still verry work in progress https://cad.onshape.com/documents/097848afb37d77975d0e0953/w/3eb177ea0c8ea9db4ff67b65/e/d7a74dff484e37160c28da54 it is a hexabot and I am thinking of using it as a portfolio (it is still verry work in progress) to get in to eastern Florida state over the summer I am also thinking about making a thrust vector controlled rocket. Can I have fair and good advice


r/AskRobotics • • 17h ago

Multi-agent pursuit-evasion simulation

1 Upvotes

Hi everyone, I am working on a multi-agent pursuit-evasion simulation with quadrotors. My current setup relies on PX4 SITL, ROS 2, and Gazebo, bridged via MicroXRCE-DDS on WSL. I can successfully launch the SITL environment, the DDS agent, and the basic teleop nodes, but I need some help with spawning a second evader drone and simulating it along with specific algorithms. I was hoping someone might have experience with this and would be willing to provide some insights on this, as this is urgent and my deadline is in 3 days


r/AskRobotics • • 17h ago

Multi-Agent Pursuit-Evasion simulation

1 Upvotes

Hi everyone, I am working on a multi-agent pursuit-evasion simulation with quadrotors. My current setup relies on PX4 SITL, ROS 2, and Gazebo, bridged via MicroXRCE-DDS on WSL. I can successfully launch the SITL environment, the DDS agent, and the basic teleop nodes, but I need some help with spawning a second evader drone and simulating it along with specific algorithms. I was hoping someone might have experience with this and would be willing to provide some insights on this or have done work related to the multi agent simulations, as this is urgent and my deadline is in 3 days. I would be really glad if i could get some feedback.


r/AskRobotics • • 11h ago

Mechanical CSE Graduate Looking to Switch to Robotics - Need Career Guidance

0 Upvotes

I'm a Computer Science Engineering (CSE) graduate from India, and I'm interested in transitioning into the field of Robotics.

I initially planned to build my career in the IT industry, but lately I've been exploring opportunities beyond traditional software development. Robotics has caught my interest because it combines software with core engineering fields such as mechanical, electrical, electronics and control systems.

However, since my background is in CSE, I'm not sure how realistic this transition would be or where I should start.

I'd like to know:

  1. Is it possible for a CSE graduate to build a career in Robotics without having an electrical or mechanical engineering background?
  2. Which areas of robotics are suitable for someone from a CSE background? (ROS, Robotics Software Engineering, Autonomous Systems, Computer Vision, Embedded Systems, etc.)
  3. What additional subjects should I learn from scratch? Should I study electronics, mechanical engineering, control systems or something else?
  4. What programming languages, tools and certifications would be useful?
  5. What is the current job market for robotics in India, especially for freshers?
  6. Would pursuing a master's degree be necessary, or is it possible to enter the industry through self-learning and projects?

I'm willing to learn from scratch and put in the necessary effort. My goal is to build a stable long-term career in Robotics rather than simply switch fields without understanding the opportunities.

I'd really appreciate the advice