r/AutoBodyRepair • • Apr 02 '21

FAQ - Start Here ( WORK IN PROGRESS)

29 Upvotes

Welcome to r/AutoBodyRepair!

You either came to us for help, or you just started a new job! (Probably idk your story). If you're looking for help on these you came to the right place!

Still a work in progress, we're only really doing this on the side so if you have any unanswered questions leave a comment and I will put in some more work to help answer the question!

Vehicle Damage

  • Scratches ( This is easy)

Ooh, that's a bad scratch, well the first thing you need to check is if it's through the clear coat. Run your nail against it and see if it catches, if it doesn't this'll be easy. If it does get out the buffing wheel.

  • Light Scratch (Photos and maybe a link here)

    • Get yourself a microfiber and some basic compound, apply to paint, and rub until the scratch clears up.
  • Deep Scratch (Photos and a link for sure)
  • Dents ( Ooh it's time to work)

The first question is where is the dent? Middle of the door? No problem. Right on a body line? Good luck. The second question is how large is it? Did it crack the paint?

  • I got this I can do it myself

    • (Links and basic info)
  • Okay it's on a bad spot maybe I should call a professional

    • (Types of pros and super rough pricing)
  • Fender Bender ( Maybe a bit much)
  • Accident ( Talk to a professional)

This is the part where you call your local body shop for a quote, or maybe more like a few body shops.

Industry

  • Detailing ( Welcome to the world of "I can only see scratches now")
  • Painting ( It's hot in here)
  • Body Work ( How is it still not smooth?)

    • Basic Steps to vehicle repair (Still have to make this pretty)

      • Inspection- what you can see Tear down- keep going until you no longer see damage Blueprint- parts to order, damage to repair, does it have to be measured, prescan with a computer Framework- measuring pulling measuring cutting fitting measuring welding measuring again Bodywork- dressing welds, body filler application, seam sealer, primer Paint work- prep sand, clean, tape, paint Reassemble- hope you tagged your bolts, post scan Detail- make it shiney

r/AutoBodyRepair • • Mar 07 '24

Read before posting.

19 Upvotes

Please read our rules to avoid post removal. We can't tell you how much a job will cost. We can't tell you if it's totalled. We can tell you what we see is broken and only speculate possible hidden damage. We can help going through written estimates We can give general insight for the overall process if you are unsure of how to proceed with finding and communicating with a collision repair shop.

Please always include year make and model with your post.

If you are attempting or inquiring about a diy repair, don't get mad if a user makes a perceived smart allic comment. You asked for advice, someone gave you an opinion about it.


r/AutoBodyRepair • • 3h ago

Lincoln MKS 2015

Thumbnail
gallery
1 Upvotes

I’m desperate 😩! I know nothing about cars to be honest lol. I just purchased this 2015 MKS it was a fantastic deal and had super low mileage! It had 69,000 miles! However the side mirror has something weird going on with it and I can’t figure it out. It looks like a film but it doesn’t feel like one…I don’t want to risk messing up the sensor I also noticed the passenger side doesn’t have the same ‘film’ if you will. Does anyone know what this is or how I could fix this? It’s become black almost like a burnt look?


r/AutoBodyRepair • • 11h ago

Can i claim insurance for this dent on my i10 nios from the dealership

Post image
1 Upvotes

r/AutoBodyRepair • • 14h ago

Repair Was the auto body allowed to do this?

Thumbnail reddit.com
1 Upvotes

r/AutoBodyRepair • • 14h ago

How to deal with this rust spot

Post image
1 Upvotes

Should I sand it? The rust converters I see recommend no sanding as the compound turns the rust into primer and seals it.


r/AutoBodyRepair • • 17h ago

Front Bumber Damage Safety Concern?

Thumbnail gallery
1 Upvotes

r/AutoBodyRepair • • 17h ago

Dent on New Car

Thumbnail gallery
1 Upvotes

r/AutoBodyRepair • • 1d ago

Rivian Body Damage Repair. Is this going to get EXPENSIVE?

1 Upvotes

Someone backed in to my truck. Is this repair doable without being the full panel replacement nightmare? Some paint damage as well besides the dent. Fully insured other party took responsibility.

dent


r/AutoBodyRepair • • 1d ago

Should I be concerned?

Thumbnail
gallery
1 Upvotes

I recently bought a 1987 Supra (7mge engine) and was concerned about a couple things. There are some parts that I know for sure have to get replaced (muffler, hatch seal & hinge, and Windsheild wipers) but was wondering if anything else looked off. The plastic piece for the right side outer panel has a broken part so it doesnt latch onto the car, part of the wood looks went but it hasn't rained so im unsure of where that came from, and the part of the hatch under the plastic covering looks rusted. Any advice would be greatly helpful, im going to take it to a mechanic hopefully this week to get it checked over.


r/AutoBodyRepair • • 1d ago

Repair tried spray painting a plastic exhaust guard and got brutal orange peel

1 Upvotes

I previously tried rustoleum gloss black to paint a plastic exhaust gaurd on my bike. the gloss is not that glossy. so I used their clear coat on that finish, and it bubbled like crazy. takes FOREVER to dry and still sticky after a month.

so used their matte black paint, and then used their clear coat on that. but massive orange peel. you can see in the pic here

https://postimg.cc/qh5YySmP

the spray nozzle itself and how it shoots out is so different then the black matte. it shoots it way too hard and way too concentrated. I also placed the can in warmish water to let it flow easier. I did 3 layers. massive orange peel.

what do I do now? sand it down with 800grit to level it off then respray with another brand? I have a clear from another brand which is supposedly better.

some direction advice please?


r/AutoBodyRepair • • 1d ago

Repair 2013 Prius c with 250,000 km - would it require too much maintenance/rework if I buy

Post image
3 Upvotes

r/AutoBodyRepair • • 1d ago

scratch and dent Scratch

Post image
1 Upvotes

I recently got into an accident involving a 2012 Ford F-150. The damage includes a dent and scratches on the body that would likely need some paintwork. For those who have dealt with similar damage, how extensive do you think the repair process would be? Would this typically require replacing any panels, or could it be fixed through paintless dent repair and repainting? Just trying to get an idea of what to expect. Thanks!


r/AutoBodyRepair • • 1d ago

scratch and dent Can these shallows one be DYI?

Thumbnail gallery
1 Upvotes

r/AutoBodyRepair • • 1d ago

Update on the DIY rust repair everyone flamed me for 😂

Thumbnail gallery
0 Upvotes

r/AutoBodyRepair • • 2d ago

Repair Any “shade tree” body shop people in the area?

Thumbnail reddit.com
0 Upvotes

r/AutoBodyRepair • • 2d ago

ACCIDENT Is this “totaled”? Would a shop be able to straighten the frame out so I could mount a new bumper?

Thumbnail
gallery
0 Upvotes

Slow speed collision at a stop sign but the way it hit from the front passenger quarter area, it looks like it bent the front part of the frame toward the driver side

I removed the bumper, hood and headlights

I was questioning / hoping (against hope) that a shop may be able to straighten the mounting points back where they need to be so I can remount new headlights and a new bumper?

Or am I being extremely naive and this is totaled / a loss?

Would love some advice, thanks in advance


r/AutoBodyRepair • • 2d ago

scratch and dent Can i fix it myself?

Post image
1 Upvotes

r/AutoBodyRepair • • 2d ago

Help

Post image
1 Upvotes

r/AutoBodyRepair • • 2d ago

Maaco 14151 Florida Blvd. Baton Rouge

Thumbnail gallery
1 Upvotes

r/AutoBodyRepair • • 2d ago

Do you think this is fixable? Bended frame

Thumbnail gallery
0 Upvotes

r/AutoBodyRepair • • 2d ago

scratch and dent Trying to avoid rust

Thumbnail gallery
1 Upvotes

r/AutoBodyRepair • • 3d ago

Ran over something on the freeway, blew a tire and punched a hole through my bumper. How bad is this?

Thumbnail gallery
1 Upvotes