r/Beatmatch • • 14h ago

Software Any advice on the technical side of things? Mixxx speaker configuration error

1 Upvotes

Got Mixxx on my windows gaming laptop to learn with, after opening initially it said something about needing to reconfigure my speaker or output, so I clicked reconfigure. Without changing anything (as I breezed by the first message too fast) I clicked okay and got a Configuration error for my laptops Realtek ASIO speakers that said:

Error opening "Realtek ASIO"
Invalid sample rate

Coincidentally, just got this laptop back from repairs and the IT guy recommended me learning to do driver updates by myself, as the general updates my laptop receives may not cover everything.
I'm not toooo tech illiterate (although I wasn't sure to flair this as software or hardware...), I guess mostly by that is that I'm a fast learner and did some tech/production courses back in 2011, but over the years my dyslexia/dyscalculia has become more overwhelming when it comes to me jumping into researching a new topic.

Any advice on fixing this (or if I could simply just plug in headphones I have plans to get some) AND pointers where to begin learning how to update drivers myself would be amazing. To be honest, I tried looking it up. And while I couldn't find anything for my exact issue in Mixxx, everything about the driver side of things was a little overwhelming and the words started to feel too jumbled.

The Mixxx manual did have this to say when I scrolled down:

" Windows

The following Sound APIs are available on Windows:

  • ASIO: Good
  • WDM-KS: Good
  • WASAPI: Acceptable
  • DirectSound: Poor
  • MME: Poor

It is best to use the ASIO Sound API that bypasses the sound processing of the Windows kernel. Using ASIO requires a driver for your audio interface from the manufacturer. Check the manufacturer’s website to see if a driver download is available. Soundcards designed for musicians almost always have an ASIO driver available, but audio interfaces built into computers and very cheap audio interfaces typically do not have an ASIO driver. If there is no ASIO driver available for your audio interface, use the WDM-KS API. There is generally no advantage to using ASIO4ALL, a wrapper around the WDM-KS API. "


r/Beatmatch • • 23h ago

Mastering et mix en live

0 Upvotes

Salut à tous !

Je souhaite comprendre comment vous gérez le mix et le mastering en live quand vous jouez en dawless sur Machine autonome/MPC/live looping, sans votre propre ingé son.

  • Quel matos sur le master ? (compresseur stéréo, limiteur, EQ, mixer avec effets…)
  • Vous traitez chaque piste séparément (EQ, compression) avant le master ?
  • Comment vous gardez un rendu constant d’une salle à l’autre ?
  • Vous mixer/masteriser dans ableton puis vous importer les pistes dans les machines ?

Pour le live loopingn (Daw) :

  • Vous faites le mix et le mastering de vos sons dans Ableton en amont, puis vous videz le projet pour ne garder que l’essentiel à boucler ?
  • Les voix, vous les gardez déjà traitées ou vous avez une chaîne live dédiée ?

Je cherche des exemples concrets : setups, chaînes, réglages, matos. Merci !


r/Beatmatch • • 8h ago

Protecting DJ controller at bar gigs?

3 Upvotes

I consistently DJ at bars where the DJ area is not super protected and people at the bar consistently spill on the DJ table. The table is not super secured and often gets bumped.

What can I do to elevate my controller to protect it from drinks / bumps? Does anyone have a bar DJ set up they can share to help protect it?

Thanks!


r/Beatmatch • • 17h ago

Can scuffed and scratched up, second hand, time code vinyl cause skips or issues in playback?

0 Upvotes

I’m being cheap, and I’m thinking about buying some second hand time code vinyl with a good amount of scuffs and scratches.

I know that I could use Relative mode, and the music will continue to play despite the record’s condition. I know scuffs can damage styluses, but I may be okay with that.

But can the scuffs impacts performance, like if I were scratching or beat matching?


r/Beatmatch • • 9h ago

Audio Quality at Bar Setup with FLX4 and RCA cables

4 Upvotes

I recently played a gig where I had to bring my own controller - I brought the FLX4 with an RCA to XLR unbalanced cable. The audio quality was sharp, low quality, and filled with noise all night. It didn't seem like most people noticed, but it definitely did not sound great from my end, and I noticed.

The dual RCA to XLR cable is 10 feet long, is this the issue? Is there something wrong with my cord? I've used this cord at other gigs before and there's never been an issue before, but now I had 2 gigs where it sounded off.

What do you recommend so that this doesn't happen again? I know the FLX4 can sound worse than other equipment, but this is what I have to play on when I'm not playing on the bar / club setup at the moment.

Should I get a new shorter cable? Do I need to get a mixer? Any advice would be helpful, thank you!

Edit: To help anyone else in the future, I found these YouTube videos that seem pretty solid explaining some of this stuff, so I will link them below here:
https://www.youtube.com/watch?v=qWGEfJMM4SU&t=42s

https://www.youtube.com/watch?v=2rlGsUabqxY


r/Beatmatch • • 4h ago

Software Autogenerated cue points with Kimicue. Anyone?

0 Upvotes

Has anyone paid the $29 and tested this product? Seems like a dream but don't want to pay and be stuck with a worthless app.


r/Beatmatch • • 1h ago

Citronic pd-1 mk3

2 Upvotes

Are they any good for a total beginner to DJing?


r/Beatmatch • • 7h ago

Grv6 or DDJ 1000

2 Upvotes

Need a four channel mixer but the AZ is a bit out of my budget. Between these two which would be the better option quality wise?


r/Beatmatch • • 12h ago

Help - what do you call this drum sound?

2 Upvotes

At about 35:00 in this mix you can hear - very gently - a four beat drum sound - it falls on the last beats of the bar, and is two strikes higher then two strikes lower. It sounds like it could be a bongo but washed in some kind of condenser? I’m not so good at this whole technical vocabulary, but I’d love to know so I can pick up some packs with that sound! mix - go to 35:00 it’s very soft in the background for a couple minutes.


r/Beatmatch • • 21h ago

Manchester UK, any recommendations for one-on-one tuition to teach me some more advanced DJ skills

3 Upvotes

I can mix, and I use stems, filters etc... but I might not be using them effectively, or at the correct point in a track. Any recommendations for somebody to teach one-on-one in the Manchester area? Preferably North Manchester.

It doesn't have to be a big business, it could be somebody who really knows their stuff and wants to make a bit of cash on the side.


r/Beatmatch • • 22h ago

Other Is the Numark Party Mix a good first DJ controller for a complete beginner?

4 Upvotes

Hey everyone!

I'm planning to get into DJing and came across a used Numark Party Mix on eBay for around $75. I'm a complete beginner, and since I'm on a budget, I'm not looking to buy anything fancy or professional right now. I just want a basic controller to learn the fundamentals, understand mixing, practise transitions, beatmatching, etc., and see how things go.

Would this be a decent first controller to get started with?

Also, since it's a used unit, I'm a little concerned about whether it could be sketchy or have hidden issues.