r/BimmerCode • • 12h ago

Need Help Updating Headlights

2 Upvotes

Hey, All. I am updating the headlights of my 2008 BMW 528i with 225,000 miles. I purchased main assemblies for both the right and left side. I am using the original control modules for low beam/ high beam and smc for adaptive headlights. Fresh bulbs as well.

One little kink. I temporarily replaced the passenger side with a halogen assembly while waiting for the proper headlight.

Two problems arise:

  1. Error message for the adaptive headlights on the drivers side, 9CBE from Blue Driver Module. I am guessing the module is bad since the previous unit was impaired. Actually, both sides were impaired. Is there a good way to check for functionality? If I have to buy this unit, what is needed to code the unit. Any suggestions would be great.
  2. The passenger side error, low beam A8AB. I used a fresh bulb. I am wondering what might be the issue here. If the controller were bad would that prevent the bulb from turning on?

Simple check will be to swap the driver with the passenger side and check the functionality. Again though if the module is bad, is coding required? Can I do this myself?

Really needing input. Techs were I am just want me to buy OEM at $3,400 for the pair which is insane for a 2008 528i.

Thanks for reading this post.