r/BudgetAudiophile • u/smackdaddies I aim to misbehave • Jul 01 '20
SmackDaddies Guide to speaker wire for "budget" "audiophiles"
Another in the continuing series of Smack Daddies advice.
Rule 1 - don't overthink it.
Rule 2 - it doesn't really matter for short distances
Rule 3 - getting a good connection matters a lot.
Length and gauge - use this as your guide https://www.cambridgeaudio.com/usa/en/blog/speaker-cables
As far as brand - Amazon Basic is fine. Monoprice is fine. Zip cord is fine. CCA (copper clad aluminium is fine). Oxygen free copper cable is fine. See rule 1.
Speaker wire has nothing to do with how many watts your amp puts out, or how much your speaker is rated for. It's all about distance which determines speaker wire gauge.
The best connector is bare wire - strip the plastic, twist, stick it in and lock it down. Just be sure you don't have any loose wires touching other speaker terminals. Keep it tidy. Here is a visual representation of that
Banana and spade plugs are convenient if you swap speakers a lot or you are trying different locations. But they are not "better" soundwise than bare wire. Same for spades.
Want direction on connecting speaker wire to amps and speakers? Great Video by Fluance will show you.
So you are saying speaker cables diffences don't matter at all?. ?
Within general parameters, there are no discernable differences.
Clearly if you are running very thin gauge over long distances (24 AWG over 50 feet) you are going to have significant degradation. But over 2 feet? Nope. Otherwise all of your speakers would be wired with very low gauge wiring.
Also, different cables of the same diameter do measure differently.
I do believe that you can hear the difference between different speaker wires
I don't believe that it matters significantly.
Spend your money on better speakers and better source material.
4
u/ImaginaryCheetah Jul 02 '20 edited Jul 02 '20
where did you get your information for recommended gauge ?
your recommendations are a bit generous compared to other opinions*.
http://www.roger-russell.com/wire/wire.htm
i'd add in a mention that you need to use correctly rated wire for in wall applications.
regular siamese speaker, extension cord, zip wire, etc, are not approved for concealed or in wall use. people need to get CM-2 or CM-3 rated cable.
* Roger Russell is the former Director of Acoustic Research, at McIntosh Laboratory, Inc. and the originator of McIntosh Loudspeakers
14
u/[deleted] Jul 01 '20
I use outdoor extension cord and it works awesome. Cut off the plugs, strip the plastic cover, heat shrink or cable pants for neatness, install banana plugs or spades. Super easy and looks great.
I use black, myself. But I hear if you use red or orange extension cord you get more watts
10
u/CharlieBrown197 Jul 01 '20
This should be a pinned post on this sub.
8
u/Flenke Jul 01 '20
You didn't mention anything about snake oil though. Where does the snake oil fit into all of this? How much do I need?
/s
7
u/RexStardust Jul 02 '20
But but but I thought my cables that have been bathed in unicorn semen and capped with gold stolen from Tutankhamen's tomb will help me hear Miles Davis farting on "Kind of Blue" even though as a 50-year old I've lost half my upper range of hearing?
5
u/not20onsugarmountain Jul 01 '20
I'd stay away from copper clad aluminum. Aluminum isn't a very good conductor and what little copper the wire has won't help much. You could use copper wire a gauge higher and still have less resistance and there probably wouldn't be much price difference.
4
u/[deleted] Jul 01 '20
All good advice.
1
u/PiersPlays Jul 01 '20
Any thoughts on repairing a severed wire? I figured just twisting them together with a bit of tape to keep the two channels separate would do the trick? Or should I be replacing with unbroken wire instead? (What I have might need several patches.)
3
u/raistlin65 Jul 01 '20
One thing I found with the copper clad aluminum is that it's often bendy rather than flexible. It's a little bit harder to get it to just lay down when you're running it compared to OFC.