r/BudgetAudiophile • I aim to misbehave • Dec 02 '20

Room Acoustics Guide

Getting closer to being done.

First things first. Do things in this order

  1. Buy better speakers
  2. Place them properly

    1. Windows belong to the side, not behind or in front of speakers
    2. Face them the long way, not the short way in the room
    3. Don't put speakers in the corner of your room
    4. Symmetry of the room matters - odd shaped rooms are not good listening rooms
    5. Place them away from the back wall, in an equilateral position to your listening spot, at least a 30 degree angle facing you
    6. The tweeters should be inline with your ears
  3. Place yourself properly

    1. Sit at least three feet away, five is better as a minimum
    2. Don't sit close to the back of the room
  4. Utilize better recordings (music compression in the recording kills music)
  5. Play higher quality streams (CD quality is enough (16 bit 44k WAV or 320 k/bs MP3) (stop listening to Youtube videos if you actually care about quality sound reproduction)
  6. EQ your system (DSP Mini is your friend)
  7. Then worry about your room acoustics

    1. Start with the simple. Put a rug on hard surface floors in front of the speakers. Curtains on windows. Overstuffed furniture is your friend. Bookshelves with books are good.
    2. Shut out the sound. Live on a busy street? If you cant block out that sound, your not going to fix your room acoustics. New windows replacing old single pane units do a remarkable job. Not cheap to do. Sealed doors are your friend - including passage way doors. You leave air gaps, sound comes in. Also not cheap. House noises - furnace, dishwasher, people walking on floors above you, etc. all need to be dealt with.
    3. Real acoustical treatment is not cheap, nor is it pretty. You are not likely to pass the WAF (Wife Acceptance Factor).

Useful Articles/Videos

Super in-depth guide at the forums at Gearslutz

Music Compression is killing music - CNET

Loudness Wars - NPR

NPR test on Audio Quality as well as Rick Beato Video

Zero Budget Room Fixes

Acoustics Insider Video

Acoustic Insiders Blog

Crutchfield Guide

MusicTech guide to Room Acoustics

Elac Guide to Speaker Positioning

11 Upvotes

13 comments sorted by

5

u/DavidAg02 Dec 02 '20

Surprise surprise... a company that sells speakers is telling you to buy better speakers! Lol.

1

u/smackdaddies I aim to misbehave Dec 02 '20

They sell everything, including DACs

1

u/zoinkability Dec 02 '20

They also sell acoustic panels FWIW

1

u/EricFullswipe Dec 02 '20

I'll add that DIY acoustic panels will always end up costing more than you think they will

3

u/StrayDogPhotography Dec 02 '20

It’s still cheaper to build your own than buy ones which are pre-made.

I just made 8 panels 1.5 m by 0.6 m and each ended up costing like $25.

0

u/[deleted] Dec 02 '20

[deleted] — view deleted comment

2

u/StrayDogPhotography Dec 02 '20

I had a local lumber yard cut me planks of pine 6cm by 1.2cm to length, and put finger joints at each end. Then I simply glued them together to create 150cm by 60cm frames. I covered the frames with a felt material and filled them with rock wool insulation.

Because the lumber yard did all the cutting the only tool I needed was a clamp and a staple gun. 90% of the cost was the wood and the cuts.

The make a dramatic difference to the room acoustics.

1

u/scikaha Dec 02 '20

Would covering them with posters adversely affect their acoustic qualities?

2

u/StrayDogPhotography Dec 03 '20

The materials should be transparent, or absorbent.

Use the blow test if you are unsure. Usually, something you can blow through without resistance is going to let the pressure waves of sound pass through it into the sound absorbing material.

1

u/EricFullswipe Dec 03 '20

Most Cotton is usually fine, shiny fabric is usually not. Those where the two main fabric tips I saw when working on mine. That and the blow test mentioned

0

u/[deleted] Dec 02 '20

[deleted] — view deleted comment

1

u/scikaha Dec 02 '20

Thanks.

Kinda figured that would be.

1

u/graybirdsmatt Dec 05 '20

This is simply not true. I built acoustic panels that ended up being less than $15 a piece. They're 3" thick and pretty darn big each.

I'll also add, fixing room acoustics is probably the single most important thing you can do in audio. You can have phenomenal speakers and in a crappy room and the sound stage disappears, the bass is either lacking or boomy, standing waves destroy all detail. It's SO important and it's not expensive if you go the diy route.

0

u/[deleted] Dec 02 '20

[deleted] — view deleted comment

2

u/EricFullswipe Dec 02 '20

Some of it depends on what tools and supplies you already have of course, but the supplies I needed ended up costing about a hundred dollars more than I expected.

As someone else mentioned though still cheaper than buying them premade! Just plan to spend more than you expect

1

u/graybirdsmatt Dec 05 '20

This is a HORRIBLE take. From acoustics is vitally important. In fact, I'd argue that it's MORE important than speakers. You could have an okay set of speakers in an acoustically tuned room and they will sound incredible, especially with how far speaker design has come the last 20 years. Or, you could have an amazing set of speakers in a crappy room, and you'll end up with a soundstage that is lacking, stand waves the ruin any detail, and either thin or boomy bass.

Please, if you have the ability, create your own acoustic panels. They make a WORLD of difference.