r/canik • u/ZealousidealSuit6195 • 7h ago
MC9 PRIME Canik MC9 Prime Radian – Light Primer Strikes – Finally Solved
I wanted to share my experience with the Canik MC9 Prime Radian and the light primer strike issues I’ve been dealing with since day one. Hopefully this helps someone who’s having the same problem.
Here’s what was happening:
Right from the start, I was getting at least 1–2 light primer strikes per magazine, sometimes even 3–4. It didn’t matter what ammo I used. I tried ALSA Pro, S&B, LOS, and different reloads, mostly 124gr. Some worked slightly better than others, but none were 100% reliable.
The frustrating part was that LPS could happen even on the very first round after manually racking the slide, not just during follow-up shots.
The slide was always fully in battery, which I also confirmed with slow-motion videos. The primers had shallow, centered strikes, and most rounds would fire on the second attempt.
Here’s what I checked and tried:
I thoroughly cleaned the striker channel and striker assembly, inspected the firing pin, and checked whether the slide was closing properly. I also tested whether the striker safety plunger was contributing to the issue, but that didn’t solve anything. (By removing it for testing purposes)
I put over 800 rounds through the gun, hoping it might just need some break-in time. No improvement whatsoever.
And here’s the interesting part: a friend of mine bought exactly the same gun, with a serial number just SIX numbers apart from mine. Guess what? Exactly the same problems! He also fired over 700 rounds with no improvement.
We contacted Canik through our official dealer, and they told us they would send replacement striker and recoil springs, but unfortunately, those weren’t in stock.
Then I finally found something that worked! 🥳
I tried a blue Glock 31N firing pin spring, which is a couple of coils shorter than the original Canik spring.
And the results?
400 rounds, 3 different types of ammo, ZERO light primer strikes!
Not a single failure. Before that, I couldn’t even get through one magazine without at least one or two LPS.
And the best part? The spring cost me around €4!
Based on my experience, I strongly suspect the original striker spring was part of the problem. Of course, that’s just my personal observation, not an officially confirmed diagnosis.
I can’t say anything about long-term reliability yet, and any change to the striker mechanism should be checked by a qualified gunsmith for compatibility and proper safety function.
But after dealing with this issue for so long, finally getting through 400 rounds without a single LPS felt pretty damn good! 😁
I’m sharing this because I know how frustrating it is to buy a brand-new gun and constantly deal with failures.
Has anyone else experienced the same issue with the MC9 Prime or Prime Radian? Did Canik ever provide an official fix?
Hope this helps someone! 👍