r/Carpentry • • 21h ago

Tools Disable and happy woodworker

Thumbnail
gallery
276 Upvotes

Retired early due to health issues. Left with full body neuropathy, blind in one eye, wobble when I walk and more yet I’ve never been happier just to be alive! 🙏

This is my little 10’x16’ shop and 3’ wide x 7’ long x 42” tall workbench. My bench weighs about 800lbs. The locking casters are rated at 450lbs each and attached with grade 8 hardware. My bench has 20 (twenty) 110 volt plugs and 2 USB’s. 7 tape measures, 2 hammers, 2 table saw sleds, one planer sled, one filler for mitre box, a 2’x32” router table and much more. Thanks for reading and looking.

I’m on Facebook as “De Walt” with a husky as my profile pic.

Please click “follow” to see more of my creations


r/Carpentry • • 7h ago

Trim Poll: What kind of pencil do you use for finish carpentry?

Post image
91 Upvotes

r/Carpentry • • 20h ago

Career where to go in our 40s?

43 Upvotes

im in an odd spot. been a carpenter for 25 years, farm kid before that. my username will tell you i haven't been great to my body( i drink much to less now but hell, it's wisconsin) union carpenter for 15 years. i was a foreman for the last 5. recently stepped away to just be a carp for reasons.( bad divorce, and life, needed less stress, dont want to solve the job sites shit managements problems everday) what are the options for someone who really doesn't like management but also is body is kinda falling apart. im already a trim carpenter for the most part


r/Carpentry • • 18h ago

I am in need of a cabinet hardware specialist.

Thumbnail
gallery
28 Upvotes

Beer money to anyone who can fix my issue.

I’m the guy who posted the 350k cabinet install with incredibly hinge choices. Here’s my problem. There are two sets of 3 double door cabinet boxes. When you open two opposing doors, they collide. If you open one door, and then the other, no problem. Who would open two opposing doors at the same time, you ask? No one. Nonetheless they are good clients and I would love to solve the problem if possible.

There are pictures included for reference. The specific thing I need to achieve is a face frame hinge (“L” style, I believe face frame is the correct terminology but am in no way certain) that swings the outside edge of the cab door in faster than the inside edge swings out. There is a condition where a Blum “surface mount” (frameless? Clip style? I will call them clip style) hinges, and the hinged edge does not swing “out” before swinging “in.”

The client wants me to notch out the face frame and use the clip style hinge the same way he notched out the face frame to accommodate the hinge. I know, it’s ridiculous.

I do not want to notch their cabinets. I do not want to mess them up. I do not want to make this problem my problem. I am willing to walk away, but I would like to be certain that I cannot achieve the hinge geometry I need with an L style face frame hinge.

Please free to ask any clarifying questions. I know it’s weird. Again, reward for a solution. Cheers!

P.s. can you not add pictures to posts in here??

Pictures in comments


r/Carpentry • • 21h ago

MTC head on Martinez

Thumbnail
gallery
5 Upvotes

If anyone wants to know, it fits. They say they don’t recommend it because it will void warranty but who cares. Finally got a D Nose on my M1


r/Carpentry • • 1h ago

Trim Ideas on trim in house.

Thumbnail
gallery
2 Upvotes

I have a customer that wants some kind of trim to break up this entry that wraps all the way around. I have drawn roughly where she wants it. I’m trying to make it match the style of the house. So it doesn’t stick out. I have no ideas on this. I can’t think of a way to make it look good. Maybe some people have some better ideas. (Extra pics are to get an idea of the style of the home.)


r/Carpentry • • 3h ago

Smartphones for carpenters

2 Upvotes

I find that my phones tend to get really beat up. Sometimes the live in my tool pouch and bounce around and get dusty and scratched.

Anyone find a phone that offers a good case to keep the camera lenses fresh and screen in tact?

My biggest priority is a high quality camera. I've always had middle of the road phones because they get pretty beat up. I'd like to do something like s26 ultra but I'm not sure it's wise they way my phones get beat up.


r/Carpentry • • 6h ago

LP smart siding butt joints

1 Upvotes

Had a contractor replace some 60 year old siding with some LP smart siding this summer.. its been finished for about a month and I notice there is buckling in multiple spots. He had 3/16 gap at all the ends but never did one at any of the butt joints, which now reading on LPs site, shows required. Is my entire house and garage going to need to be stripped and redone? I am so disappointed right now


r/Carpentry • • 23h ago

Help Me Toolbelt recommendations?

1 Upvotes

I want to get my boyfriend a toolbelt for Christmas. He is not a carpenter or tradesmen, but has been doing some home renovations, and is taking an interest in a bit of wood working. He will be working on some exterior buildings and fencing next year.

He is 6ft tall, and a 30inch pant size. I have been reading reviews for different tool belts, but people with a 32 inch waist have been complaining the tool belt is too big and they would have to cut into the padding to make it fit. I know suspenders are an option but im not totally sure he would utilize them.

Any recommendations? I am in Canada by the way.

Edit** i have just learned i want a tool POUCH not a tool belt. Thank you everyone for educating me 😂


r/Carpentry • • 1h ago

😭😭😭😭 How can I make these walls looks more flush as a “bandaid” solution without ripping them out and then installing them level?

Thumbnail
gallery
0 Upvotes

r/Carpentry • • 4h ago

Tools Board drifting from fence

Post image
0 Upvotes

Anything I rip has consistently been drifting away from the fence extending past the blade. I tried to adjust my sawstop and I have everything in alignment but I still have the problem. What am I missing?


r/Carpentry • • 4h ago

Concrete Concrete guys and formwork crews — would you actually use a reusable double-headed screw? What would make it worth buying?

0 Upvotes

Curious what everyone here thinks about reusable screws for concrete forms compared to traditional duplex nails or regular construction screws.

I've been looking into the different options out there and wanted to hear from people actually using them, especially concrete workers, foremen, and business owners.

A few questions:

  1. What are you currently using for wooden forms, and why?
  2. Has anyone used products like Duplex or Johnson screws? What do you like or dislike about them?
  3. Do you have issues with screws snapping, stripping, bending, or being difficult to remove?
  4. How many times do you realistically reuse them?
  5. Do they save enough time and labour to justify the extra cost?
  6. What do you currently pay for them, and what would you consider a reasonable price per screw or per bucket?
  7. If you could improve one thing about the existing options, what would it be?

Especially interested in hearing from owners who actually purchase these things and guys using them daily.

Just trying to understand whether they're genuinely worth using or if traditional nails and screws are still the better option.

Appreciate any firsthand experiences!


r/Carpentry • • 5h ago

How would I go about changing these rollers on these drawers

Thumbnail
gallery
0 Upvotes

I can't use a euro slide because the drawers don't have any extra width on the opening. I need it to be a "undermount drop" do they even make these? and I need it to be front and back mount because I have a 1/4 in gap on either side of the drawer once it's pushed in, and the outside is a 1/4 in panel that a screw would go through

How bad of a decision would it be to put side mount slides on the bottom? I can potentially see the possibility of them bowing but I'm curious if anyone has done something like that

Think I figured out a solution with a "tri roller center mount slide"


r/Carpentry • • 1h ago

Won’t this look bad once finish how do I cover it up?

Thumbnail
gallery
0 Upvotes

Obviously there’s gonna be base board on the walls but I can’t put that in the door jamb? Right?


r/Carpentry • • 19h ago

Trim How do I cover these gaps correctly on this pocket door?

Post image
0 Upvotes