r/ChastityCageDesign • • Aug 30 '26

Get Your Free Drop-in Barrel Lock Junction Right Here

Thumbnail
gallery
24 Upvotes

Junctions are hard and are probably one of the largest barriers of entry on making a cage. Why? Because getting a good model of the barrel lock itself is hard and clearances have to be right.

I really want to lower that barrier of entry so hopefully this junction along with a subtractive model of the Burg Wächter ME/2 will help — you would use it to design your own junction.

This drop-in junction is not intended to be pretty as I would expect you would further add onto it, fillet it, etc. It's basically the smallest rectangular junction that can be made for FDM, SLA, SLS, or MJF prints (1 mm wall thickness, 2 mm along the direction of stress).

I have multiple STEP files available for different clearances between the two sides of the junction and between the lock and the two sides (I find you can usually have tighter clearances there as ME/2s have far higher tolerances).

I've also included the raw barrel lock model as well as a simplified version intended to be used in subtractive boolean operations for making your own junctions.

Pictured is the key I designed for my wife in sterling silver. That, you can't have.

https://www.printables.com/model/1828456-interface-and-burg-wachter-me2-models


r/ChastityCageDesign • • Aug 15 '26

Know a CAD tip or trick? Share it.

8 Upvotes

I'll start us off.

  • Have a single master sketch that defines your overall geometry. I put mine on the right (yz) plane because I prefer my z-axis going in the direction of the penis. So, ring size, cage inner diameter, ring / cage angle, ball gap, cage profile, all of that will be on my master sketch. And it doesn't need to be constrained because the only thing that will make it change is you changing it.
  • An erect penis goes along positive z with x pointing to the wearer's left. Why? The penis is "normal" to the plane of the body and so any revolves you do, you've already got the z-axis pointing in the way you want. This is just what I've found but if you're not yet married to a more conventional positive x-axis penis, I think you'll find it's less arbitrary.
  • Unconstrained geometry should be based on the shape of the penis, not something like the penis shape + 1/2 the wall thickness or whatever. Trust me, annoying mistake to make.
  • Get a good barrel lock model and use subtractive boolean operations to make your junction.
  • If you want to show off, learn to render. Blender is great for this and with plug-in like BlenderKit you can find materials and scenes for your cage. You just need to know the basics — moving, rotating, and scaling.
  • Curved rings... draw a circle in one plane (top (xy) plane for me) and then the profile of your ring's shape in another. Some apps have a single tool for this (e.g., projected curve) but what they are doing is extruding surfaces from both sketches and then finding the curve where those surfaces intersect. Sweep / pipe your profile through that curve and you're golden.
  • Have something you can model around. If you're just doing a simple arc-based constant-diameter cage, you don't need it but if you're doing a spline for your outline with variable diameter, have a arc-based constant-diameter surface you can use to see how you're deviating from the generic model — and you want to deviate, that's the point, but it's nice to see how much you're deviating. Now, could you use a picture of a penis? Absolutely, especially if you're modeling a headlock.
  • If you're doing a curved ring, the effective height of the ring is less than the diameter of the circle (the width will stay the same). That's how I ended up discovering I could wear a 48x45 mm ring
  • Fillets go last. Don't even bother with them until you have everything the way you want it. Fucking fillets.

r/ChastityCageDesign • • 1d ago

Feel free to critique my designs. Shaft only and tetherspout

Thumbnail
gallery
4 Upvotes

The purpose of these are to be shaft only and used with the tetherspout. I didn't like the feel of the tetherspout hanging so the flat one will have the locking nut glued onto it. The shaft section will be touching all round with some snugness.

The spherical one is designed because when I was wearing a cupcage with the tetherspout, if I got hard it would hurt around the internal locking ring. I made the sphere to give it a bit more room.

I haven't found anywhere to print them yet, but in my head they should go alright for a first run. I'm not sure if I'm allowed to add links to the tinkercad so I'll put it in the comments


r/ChastityCageDesign • • 2d ago

It took a lot of revisions but I'm finally happy with it. Now I just better hope it fits him.

13 Upvotes

r/ChastityCageDesign • • 3d ago

When booleaans won't boolean

6 Upvotes

Just a tip that I'm sure a lot of you already know. Often you'll run into something where a boolean or some other additive operation just refuses to work even though there's just nothing wrong.

This usually happens when two objects perfectly align like when two sweeps merge together and share a tangent. What I think is going on is the kernel can't decide the resulting outside surface because they are both perfectly coincident. What I find usually fixes this is just a tiny shift. For example, I'll move one of the two parts 0.01 mm in some direction — too small to matter but enough for the kernel to get out of the tangency.

Anyway, it was on my mind (as I just had to do it).


r/ChastityCageDesign • • 4d ago

Onshape Chastity cage tutorial. I'll leave it up for 24 hours

Thumbnail youtube.com
7 Upvotes

The guy who was an asshole to me about not leaving it up long enough won't see it I guess. Because I blocked him.


r/ChastityCageDesign • • 5d ago

Who's up to create some unusual cages? NSFW

Post image
8 Upvotes

I have a couple good ideas for unusual cages that i'd like to share, discuss, refine and make available for others to make them (metal or 3D printing) once they're finished, but i don't know how to use design software and i don't owe a 3D printing machine, so basically i'm just a creative mind, not a designer or a maker.

IMPORTANT: i'm not selling ideas, I just want to see some ideas come true and maybe just get a sample cage, this is all for the love of kink =)

Let me explain what my issues with regular cages are so you can understand why i'm designing unusual cages:

- Most chastity cages won't work on me, because i'm a grower in winter and a shower in summer, i have low-hanging balls, no PA, a 6.7 inches long and 5.7 circumference dick with a big head. most cages slip down when my balls hang low and my dick slips out very easily. When i get an erection, my dick pulls the cage forward and since my balls stretch a lot, my dick can come out easily too.

- Cages with "windows" or openings in the glans part usually cause pinching when brushing against clothes, so i generally prefer cages that leave the whole glans out or cages that cover it completely (or almost).

- I don't have a cleft pee hole like some guys do, so when it's kinda hot or when erected, the tip of my penis head pushes thru the opening a little bit and gets pinched with my underwear, pants or bedsheets, so i generally like cages with a comfortable urethral insert or enough space between my pee hole and the external opening.

I'm currently waiting for my first shaft only cage, with a glans ring, but i think my dickhead will get released easily in winter of get choked and bloated in summer (we'll see...)

Here's an idea i made with AI (it has many errors, but i couldn't get it to correct them, so, don't take it as a finished idea, it's just a bad sketch)

If anyone is interested in discussing some designs i came up with, Please DM me =)


r/ChastityCageDesign • • 6d ago

RFQ Need some CAD help

Post image
4 Upvotes

I posted this first in r/chastitytraining and then I figured out the right name for this subreddit. Maybe this will be an RFQ, but initially that wasn't the intention. I want to retrofit a BAWR device with a cylinder lock to have parts that fill the cylinder cavity and lock with a security screw. Basically I want to 3D print (CNC print???) something that functionally replaces a standard 19mm Burg Wachter cylinder lock. The issue that I am having is that part of the lock juts out / extends past the housing (see photo). I am trying to design parts that would smoothly fill out the receptacle as two pieces that use a security screw to connect or even a plastic tab that pulls through. I want the lock cylinder flush with the lock receptacle. I didn't include this photo, but opposite the keyhole side there is a small circular opening on the opposite end. I am envisioning 2 pieces: one that drops in (the latch replacement) and the other slides into the receptacle with a tab that sits flush with the receptacle. I think this can work two ways: 1) screw goes into the hole opposite the current keyhole side and binds Part 1 and Part 2 together, or the screw can come from the keyhole side through Part 2 and binds to Part 1.

I started tinkering with some online CAD software and I got part of the way there, but I'm really not getting this right.

Does this make sense?


r/ChastityCageDesign • • 6d ago

Ring size: Diameter vs Area

3 Upvotes

We usually size our rings in 2 – 3 mm increments. Anything below that and most would have a hard time even telling the difference. But I really think (ideally) we'd be using equal-area increments. So, looking at the difference between 46 and 48 mm gives ~150 mm^2. Using that as a reasonable increment and starting from 1,000 mm^2, we'd have:

Area (mm²)Ring diameter (mm)ΔØ (that was fun to type)
1,00035.7—
1,15038.32.6
1,30040.72.4
1,45043.02.3
1,60045.12.2
1,75047.22.1
1,90049.22.0
2,05051.11.9
2,20052.91.8
2,35054.71.8
2,50056.41.7
2,65058.11.7
2,80059.71.6

So, using that 150 mm^2 increment, we first have a ~2.6 mm change in diameter but by 2,800 mm^2, we are at 1.6 mm. My contention is that going from a 58.1 mm ring to a 59.7 mm ring would be equivalent as going from a 35.7 mm to 38.3 mm.

Now, in practice, diameter (well circumference) is more user friendly but I'm just musing that if we were to use anatomical based sizing, we'd be talking or 1,600 mm^2 ring, not 45 mm.

If I were a company that did rings in abstract sizes, like, I don't know, #0, #1, #2, etc, I might base those sizes on areas, not diameters. Just sayin' ;)


r/ChastityCageDesign • • 7d ago

RFQ What are the exact dimensions of a typical barrel lock?

Post image
7 Upvotes

I’m making a personalized set of devices and such, but one issue I’m running into is figuring out what dimensions to make the part the barrel lock goes into. I hear that most of them are pretty much the same, which is good to hear. But I still can’t seem to find exact measurements of the barrel lock itself and angle the lock sits at when in the locked position.

This is the specific barrel lock I was looking to buy, but if someone has measurements of a different one thats similar to this one that’s also appreciated.

https://a.co/d/0307FBeF

I want to apologize for how the measurements are described because I don’t particularly know specific names for the exact parts of the barrel lock and there isn’t allowed to be images here apparently, so I’ll try my best to describe what I can.

The measurements I’m looking for are (mm are most appreciated):

Diameter of the circular part at the top where the key goes into

Width of the bottom part (that moves into the locking position)

Height from the bottom of the circular part to the bottom of the rectangular part

Length of the barrel lock (like the entire thing)

Angle the locking part sits at when in the locking position

Length of the part that moves up into the locking position

If anyone has a spare barrel lock laying about, knows where they bought it from, and is willing to send some measurements my way, please feel free to comment measurements. Thank you in advance!


r/ChastityCageDesign • • 12d ago

It's here: Full Color MJF

Thumbnail
gallery
14 Upvotes

Turned out pretty well. I gave the junction a lot of clearance because I just wanted to ensure pieces fit together — a gradient full-color cage isn't really Jenn's (or my) thing.


r/ChastityCageDesign • • 13d ago

Shameless Self Promotion Second Design! Much Better Than The First

Thumbnail
gallery
7 Upvotes

I challenged myself to recreate the basic concept of my first design but with simpler shapes and less errors, which lead to my second design! I’m super hyped about this one! So hyped, in fact, that I bought it as well as the first 😅 (we won’t talk about that right now)

My favorite things about this design versus the first are that this one is a bit thicker, so therefore more durable, it has less issues in the interior whereas the first design has some areas that will definitely need sanded down, the interior dimensions more closely fit my tdick, and I generally like the shape and look of this concept better!

I’ll be able to do a side my side comparison of both these products AND my custom alcatraz cage once they all get here! (My personal made cages will likely get here sooner)


r/ChastityCageDesign • • 14d ago

Shameless Self Promotion Chastity Cage For Trans Men

Post image
9 Upvotes

Hello, I’m River, a trans guy who’s been interested in chastity cages for a while. Because I hadn’t found anything on the market that would suit my needs, I decided to take matters into my own hands and pick up 3D modeling to try and make a design that would do these following things:

Cage my Tdick in a way similar to a cis mans cage

Be styled like a cis mans cage

Fit my anatomy (size, shape, etc.)

Be a known body safe material.

The design shown on this post is what I’ve come up with so far, which is specifically measured to fit me, but could likely also suit others with similar anatomy or make for a good jumping point for others projects.

The concept is that the ring goes around the outer labia (hence why its curved), the cage goes around/on top of the tdick, the outer lips sit outside the cage, the top and bottom bars hold the cage and make receiving penetration more difficult (while still being easy to clean), and space for a four way harness to latch on.

I’m glad to have the opportunity to post in this subreddit as well as create r/TransmascChastity for those like me who want to see more designs that actually fit our bodies.

Hope you enjoy this design, and I’ll be posting more soon!


r/ChastityCageDesign • • 16d ago

More messing around in Blender

4 Upvotes

Is this a workflow you Blender guys are using:

Curve -> Curve to Tube -> Convert to mesh -> Wireframe modifier -> Edit


r/ChastityCageDesign • • 18d ago

I'll believe when I see it but a $5K at-home 316L printer? Take my money.

Thumbnail
snowx.com
5 Upvotes

r/ChastityCageDesign • • 20d ago

PETG, PLA, ABS, and TPU: cellular toxicity

13 Upvotes

Many FDM printed cages use PETG, PLA, or ABS. FDM is the technology used by most consumer 3D printers. A few businesses also use FDM such as RoosterCage and TameGuard.

There is now a study specifically about plastics printed using FDM as these plastics usually have additives in them such as pigments or other chemicals to make them easier to print with. This doesn't address plastics used in other processes we commonly see but only in commercial machines such as nylon used in SLS or MJF (think Cherry Keeper, Evotion, and Chastity by Newbie Sub ;) ), etc or ABS used in injection molding (many Amazon cages).

Summary:

Contrary to general thinking, ABS / ASA was the safest (although one medical-grade formulation performed poorly). This doesn't talk to vapor smoothed ABS so that's an unknown. But the TL;DR of the results are:

  • TPU: Severe cytotoxicity
  • PETG: Significant metabolic dysfunction
  • PC: Significant metabolic dysfunction
  • PLA: Cells had high survival but measurable stress
  • ABS / ASA: Generally good results

Now, the study doesn't say all TPU or PETG is harmful to cells, just the ones they tested as each will vary from manufacturer to manufacturer. Also, these tests were conducted in vitro, using isolated human skin cell cultures, rather than in living humans.

Finally, they didn't study wearing cages of such materials.

https://www.reddit.com/r/3Dprinting/comments/1xiehn7/hidden_cytotoxicity_and_mitochondrial_dysfunction/

Original study: https://www.nature.com/articles/s41598-026-56283-1


r/ChastityCageDesign • • 22d ago

Proper remesh VS triangle mess

5 Upvotes

I'm working on the set of cages in Blender. Process involves sculpting, so I end up with well-too-high resolution mesh of randomly arranged triangles. Such blob creates two problems: there is no reason to ship so many triangles when few do a trick (big file sizes slow down downloads and slicing) and there is no clean way to connect them to the hard-surface locking interface.

My usual way of fixing both problems is retopology. Manual retopology. It takes... more time than I'd like to admit. So, I sat down and figured out how to marry sculpts and hard surface modelling.

Finished organic sculpt connecting into hard surface modelling.

Process is still not refined nor streamlined but the steps are:
decimate original sculpt > loop select and delete excess geometry > bridge edge loops with pre-prepared locking interface > triangulate bridge with geometry nodes magic > merge everything together. It's not perfect, a little bit of manual work required, and whole ordeal created three non-manifold edges, but it works!

On top of time saves, the resulting mesh is 70% smaller compared to my manual remesh and produces less artifacts (I'll admit, that can be blamed on my skill issue).

So yeah, triangle mess won. I'm mourning a little over wasted time and slick look of the proper topology, tho...

Example of the almost glitching manual retopology (on the right) and less dense and safer decimate (left).
Dense retopo vs decimated sculpt.

r/ChastityCageDesign • • 23d ago

Ok, my last one of these, I swear

9 Upvotes

r/ChastityCageDesign • • 24d ago

Thought I needed something a bit... funkier

14 Upvotes

Just learning new stuff. My previous animation, the camera was constrained to face an invisible object's specific face as it slowly rotated. This time I'm having it follow a curve. That's funky.

I'm having fun learning all this stuff.

Anyway, if I ever offer something like this, it definitely isn't well served by a stately rotation.


r/ChastityCageDesign • • 25d ago

I've got this one on order from Shapeways — Full Color MJF. It won't be here until mid-December. WTF is up with their lead times?

10 Upvotes

I've never done texture painting before. The dither was pretty straight forward. But of course I added my MJF texture for the render.

Now, why can't the slicer take this color information. I can do full CMYK printing so I could actually print a not-horrible representation of this but slicers can't handle it. Well, HP's MJF slicer can.


r/ChastityCageDesign • • 25d ago

Anyone have any experience with OnShape MJF? Thinking of trying full color. Rough mating face offsets for vapor smoothed?

Post image
7 Upvotes

r/ChastityCageDesign • • 26d ago

Apologies to JosieLynnCD

9 Upvotes

I had a customer ask for a headlock so I modeled one.

Specifically I modeled a Cherry Keeper-style headlock. What made it CK style? It was positioned the same place where my 2nd cage's ring was placed and involved the same basic concept: thicken the ring so it protrudes into the cage and narrows it at that point.

Her profile is likely tear dropped or ovalular. Mine was different because my base profile is rectangular whereas hers is circular. But it was basically a CK headlock transposed onto an Arbor.

I don't know how u/JosieLynnCD feels about it but I shouldn't have done it regardless. And I sincerely apologize.


r/ChastityCageDesign • • 26d ago

Working on a headlokc

Post image
13 Upvotes

I'm trying to add a basic headlock. And of course, a headlock is easy but the trick here is that this model is supposed to be extremely robust. I can't have overly fancy geometry that fails making me tweek booleans or whatnot. Why? Because I have this constraint that I should be able to make remake someone's cage from scratch and if I have to change the model, I've lost that ability without some very careful file versioning.

So, since launching, I've added a urethral ridge, which I think is somewhat unique to my designs although I encourage others to adopt it—the urethra rubbing on clothing is a pretty common issue and I've had it on my Willowweave for a while and it really helps. I'm beta testing a headlock with a client—he'll have a few test cages soon. And next, I really want to add tetherspout support. But the damn security screws. Maybe I just need to use something similar to u/tdfun's idea of a barrel lock that blocks access to a pin. Was that your idea or was it someone else's? Or maybe a security tag that blocks access to a pin? u/tdfun, that sounds more like you ;)


r/ChastityCageDesign • • 29d ago

Blender FTW

5 Upvotes

Sometimes parametric CAD just refuses to do fillets. The math behind fillets can be very challenging and the model used just won't work in certain scenarios. Well u/PrintedBonds asked why I just didn't do it in Blender using sculpting tools.

I haven't messed with sculpting tools much but after screwing with the dynatrop settings (using terms like that makes me sound smart), using inflate followed by smooth, I got something that looks pretty good. And this is just messing around.

The "fillet" between the ring and the junction was done with an Inflate brush followed by Smooth.

Now, for a $170 custom cage, this is a lot of extra work but on the other hand, I'm bringing it into Blender for an animation for the customer, I might as well do this while it's there.

Let's just hope I don't accidently print them a 42 m ring.

Another example where I couldn't get fillet to fillet:

Pretty cool. And it'll just take practice before I easily get it to look how I want.

Oh, and the new mesh:


r/ChastityCageDesign • • Oct 19 '26

Here at CBNS, we're always innovating to meet the needs of our demanding customers. May I present urethral ridges, the latest example how our dynamic company turns ideas into solutions.

Thumbnail
gallery
12 Upvotes

(What this post would sound like if I had a marketing team).

Also, I really love the finish of these vapor smoothed MJF prints. This is undyed (hence the tiny white specks). The fillets are important here otherwise you get white rings around the bars where they cross the cage ring.

Fucking fillets.