https://gmccollu.github.io/woodshed/
To be clear up front: this is a personal open-source project, not a Cisco product, and it isn't supported by Cisco. It takes standard syslog from any sender, so ASA and FTD should just work, but see the testing note below: I haven't pointed real ASA/FTD at it yet.
The story is the same one a lot of you have lived. Something breaks, the box reboots or the buffer rolls, and there's no syslog from the window that matters. The case stalls on "enable logging and wait for it to happen again". Usually the reason is the only machine around is a Windows box or a laptop and nobody wanted to fight a syslog setup on it.
Woodshed: MSI, pkg, deb, rpm or a portable zip. Listens on UDP and TCP 514 straight away, so on ASA it's `logging host <iface> <ip>`, `logging trap <level>`, `logging enable` and you're done, on FTD it's the syslog server in the platform settings. TCP works too. Raw messages are stored exactly as received, plain text per device per day. Disk budget it won't exceed, dropped/refused counters in the UI, and an export zip with a manifest, SHA-256s and the gaps when it wasn't running, so it's something you can attach to a case and trust.
Most of the code was written with AI assistance. I did the design and ran the lab testing; the security review was a separate AI reviewer with read-only access to the code, and I went through every finding, decided the fixes and had them re-tested.
All the testing so far is lab traffic generated by my own sender (RFC 5424, RFC 3164 and bare lines, 8 source IPs). No real devices yet beyond a friend's homelab, which is in progress. It doesn't depend on any vendor's format and always keeps the raw line exactly as received, so any device that speaks syslog should work, but I haven't proven that.
Proof so far:
- 10k msg/s UDP for 10 min every release (GitHub runner): 6,000,000 sent, 6,000,000 stored, 0 missing
- Linux VMs over a real network: 0 loss to 40k msg/s TCP, ~1/3 of a core, <50 MiB RSS. UDP loss above that never reached the VM
- 24 h soak at 3,000 msg/s on the Linux VMs, 259.2M messages each: TCP exactly once, UDP lost 3-4 per million, all of it upstream of the VM
- reboot mid-stream: back on its own, 2 UDP messages lost, export shows the gap
- security review before the first RC (0 critical, 1 high, 7 medium), fixed and re-tested twice
- CI installs on Windows, macOS and Linux, x64 and ARM. `gh attestation verify` on release files
Limits: installers unsigned for now (SmartScreen / Gatekeeper ask once). 1.0.0. Not a SIEM, no TLS syslog or forwarding yet. I haven't run a firewall-specific parser test suite, which is part of why I'm asking.