r/ClaudeCode • • 5h ago

Discussion Time to burn my usage đŸ˜¶â€đŸŒ«ïž

Post image
206 Upvotes

After multiple rounds of applications and discussions, finally approved. This was a hassle... Hope it's worth it!

Any hard learned lessions from you guys, besides burning a lot of usage?


r/ClaudeCode • • 2h ago

News/Updates Everything Anthropic has told Claude to stop saying

Thumbnail
sheets.works
89 Upvotes

One day, while talking to Claude, I realised it had stopped saying “Certainly”. And I was like, what? Till yesterday you were certain, and now all of a sudden you’re not. Why? What is happening?

So I went looking, and the answer was on Anthropic’s own website. Before Claude reads a word you type in the Claude app, it reads a set of instructions from Anthropic called a system prompt, and Anthropic publishes them.

So Claude hadn’t changed its mind, somebody had told it to stop, and I wanted to know what else they’d told it. I read all 50 of the prompts Anthropic has published since, looking for every habit somebody had to write down and ask Claude to drop.


r/ClaudeCode • • 1h ago WOW

Tips & Workflows I built Nihil for Claude Code: a desktop IDE where Claude designs PCBs, CAD files, firmware in simulation, and outputs fab files, alpha is free to download

Thumbnail
youtu.be
62 Upvotes

r/ClaudeCode • • 8h ago

Discussion Claude code is design to make you dump

125 Upvotes

I've been writing code for the past 10 years, but a couple of months ago, I switched from Cursor to Claude Code after Cursor started pushing its own models and limiting usage of Claude models. I've been really enjoying Opus and Fable, but there's something I've noticed about how these tools are changing my coding habits.

Claude Code is set up in a way that makes reviewing code harder than it should be. You mostly get shown the diff, which makes it harder to explore other files and understand the broader context. On top of that, it runs deep review skills before committing, which often flag edge cases that don't necessarily need to be addressed. The agent then applies fixes automatically, sometimes making the code 10 times more complicated and harder to maintain without even asking for your approval.

Naturally, I've found myself becoming lazier and lazier with code reviews. And I suspect the same thing is happening with some of my colleagues.

A couple of days ago, after a release, we started getting weird reports from clients, and it became clear that parts of the codebase were becoming increasingly difficult to maintain. That pushed me to become much stricter about code reviews again, but honestly, I feel like these tools are designed in a way that works against that. Doing proper reviews takes more tokens, more time, and more effort than just trusting the agent.

I'm curious to hear what other engineers, especially those who don't consider themselves vibe coders, think about this. Have you noticed AI coding tools making you less disciplined about reviewing and understanding your own code?


r/ClaudeCode • • 1h ago

Built with Claude Claude Code Has Made It Enjoyable To Go To Work Again!

19 Upvotes

I've been using AI for a year now, but didn't really understand the extent to what it could do until the first part of October. Since October I can't wait to get to work!

Little background, I'm an accountant and operations manager for a Whiskey Company by trade but have some limited coding experience from some Pascal in HS (1990's don't judge), some limited business coding required in business school, and some MySpace web tinkering.

I've always been a HUGE open source fan and would use Libre Office in college because fuck paying a subscription to Microsoft for what I used to buy once and use for years. Work for the last 13 years has been a slow drudge of waking up, logging into whatever off the shelf bullshit was available, and complaining that no one made software for who uses it.

I then heard rumblings about REA and how Brandon Thomas and team had cloned Adobe and then just released it, and it lit a fire under me.

I started big by Vibe coding a replacement program for our Distillery Management software. I watched some YouTube videos on how to set up prompts and how to structure the build and started planning. I spent a whole day connecting Claude to the application, having it watch me perform tasks, letting it know what shortcomings the app had, and the additions that would bring together the Excel sheets and Google Docs we had cobbled together a workflow with.

I've been building the program in my spare time at work at a couple of hours a day and using Friday as a hands on review and testing of the additions. When it reaches a milestone I had Claude build an adversarial agent prompt for me to feed to Grok and an Abliterated DeepSeek model so I can get 2 different models to security check the code.

On top of that I've been inspired to build a better QuickBooks, and have even built two phone apps for my wife and I. A Family Budgeting App that has our budget, a family football pick em leaderboard, and some AI trading bot results I have in an Alpaca paly money account. A Dinner Decision App that looks like an old Betty Crocker Cook book that you plan the week's dinners on and the app automatically pulls in new suggested recipes from the web for variety, and then creates a shopping list that is grouped by department for easy runs and puts all the recipes in a card view so she can use her phone like a cookbook while preparing dinner.

The bottom line is I feel like someone who knows how to work DOS in 1981, or how to make a website in 1993, or how to program a phone app in 2009. Everyone I talk to is using AI like a search and answer bot, and has no idea it's capable of anything above a dashboard.

Just wanted to share and thank everyone here for sharing! I learn a lot by just lurking in here and reading all the amazing workflows, programs, automations, and stuff people are doing.

It's really inspiring and helpful!


r/ClaudeCode • • 1d ago

Humor Opus is still the goat

Post image
717 Upvotes

r/ClaudeCode • • 16h ago

News/Updates I am in

Post image
136 Upvotes

r/ClaudeCode • • 1d ago

Discussion Sol 6.2 and Astra 6.2 just released

Post image
668 Upvotes

Fable 5.2 is better than Astra 6.2 and Opus 5.5 is still unmatched for Sol 6.2.

I do not care about cost per task personally so if anyone wants to dig into that feel welcome to post here.


r/ClaudeCode • • 5h ago

Tips & Workflows Reading a public GitHub issue inside a write-enabled agent session taints every tool call that follows

12 Upvotes

When a coding agent pulls raw issue text or PR comments straight into an active session, any hidden prompt injection in that thread shares the same context window as your shell and file tools.

In interactive runs, WebFetch routes page fetches through a separate summarization call instead of handing raw HTML to the main session. Running curl or gh inside Bash skips that boundary and dumps untrusted strings straight into the conversation.

Headless automation widens the gap. Non-interactive -p runs skip both the folder trust dialog and .mcp.json project approval prompts, so an unattended triage job that reads external issues and holds write permissions can run commands with zero interactive checks.

Splitting read-only triage into a separate session or blocking writes once untrusted content enters context avoids the mix. A PreToolUse hook can check a local taint marker before letting Edit, Write, or Bash execute:

{
  "hooks": {
    "PreToolUse": [
      {
        "matcher": "Edit|Write|Bash",
        "hooks": [
          {
            "type": "command",
            "command": "./scripts/block_if_tainted.sh"
          }
        ]
      }
    ]
  }
}

Once a session ingests external issues or emails, exiting with code 2 from the hook forces the edit or shell step to stop until a clean session handles the implementation with sandbox network isolation turned on.


r/ClaudeCode • • 3h ago

Discussion Fable 5.2 vs Opus 5.5 in Claude Code, same one-line prompt: a 5-minute GTA history film where every frame and sound is code (zero assets)

8 Upvotes

Same prompt, 6 AI coding agents, zero assets. I asked each one to make a 5-minute motion film of GTA's whole history, ending one day before GTA VI. No footage, no images, no music: every frame and every sound had to come from code they wrote.

The prompt (typos included):

"Create a 5 minute motion video, without using any sounds or assets, you need to generate absolutely everything, sound, effects, transitions, animations, artwork, extremely well thought, animated, picturing GTA entire history from the very beginning untill Today, 1 day before GTA VI launch."

Setup: Claude Code (Max effort) for Claude Fable 5.2 and Opus 5.5, Codex (Ultra effort) for GPT-6.2 Astra, 6.2 Sol, 6.1 Sol and 6 Astra. One shot each, own folder, no fixes from me, same PC for all six.

Results (my ranking):

  1. Claude Fable 5.2: 1 h 43 min, $44.32, 1080p60
  2. Claude Opus 5.5: 1 h 34 min, $37.19, 1080p60
  3. GPT-6.2 Astra: 14.5 min, $9.21, 720p24 (the only one that used an image generator, for its painted portraits)

4–6. GPT-6.2 Sol (9 min, $1.73), GPT-6.1 Sol (13.5 min, $2.01), GPT-6 Astra (16.5 min, $14.47), all 1080p24

Costs are API list-price equivalents from each run's token logs; the runs themselves used subscriptions. The four OpenAI runs ran at the same time, the two Claude runs ran alone.

Watch any two side by side, in sync, and switch whose audio you hear: https://gta-ai-showdown.vercel.app


r/ClaudeCode • • 16m ago

Humor You know when you're learning to drive..

4 Upvotes

... and a few months after getting your license something just clicks and everything feels natural, like you get into an autonomous flow state.

I've been working on Claude Code since last November and the number of harnesses, "factories", loops, graphs etc I've tinkered with is beyond unhealthy - and each time there were bumps in the road, blockages, breakages and frustrations etc

Well, today, all day has felt like that natural flow state - the first time I've reached it for a full day and it doesn't feel like it's going to break tomorrow either. And GODDAM IT FEELS GOOD

so lol.. just wanted to share my 'moment' here with my fellow autists here haha đŸ«ą


r/ClaudeCode • • 2h ago

Help/Question Is Claude Ultra worth it for heavy Fable usage?

6 Upvotes

I’m thinking about upgrading to Ultra for $180/month. I mainly use Fable for coding and building my Roblox game, sometimes for hours at a time (adding $20 each time for usage credits).

For anyone on Ultra, how long can you actually use Fable before hitting the weekly limit? Does the lack of a 5 hour limit make a big difference, or do you burn through your weekly usage quickly?
Just trying to figure out if it’s worth the money.


r/ClaudeCode • • 31m ago

Built with Claude A game with a galaxy of 150 million star systems in a 299 kB HTML file

4 Upvotes

PLAY THE GAME - GitHub

I vibe-coded Voidstruck over 4 days. It's a procedural space exploration game with 150 million star systems, fitting into one 299 kB HTML file that runs in your browser.

Every planet can be landed on (except for gas giants). You can fly low over and step out to explore on foot and by jetpack. Every star, planet, moon and name is generated from a seed as the player progresses. There are no images, models, audio files or libraries.

The story: A jump drive test goes wrong and throws you 2,500 light years from home. You make your way back one jump at a time, but every jump costs years on Earth. Messages from home reach you along the way, and what you find when you land depends on your actions.

On the way you can refuel in a star’s glow, pass pulsars, white dwarfs and black holes, each with its own look and music. There are eight kinds of worlds, from ocean and lava to crystal and living ones, with plants, animals, weather, and day and night. You can also mine, build bases that earn credits while you travel, upgrade your ship at stations, and fight or flee raiders. The galaxy also features our own solar system. There are four ships to choose from and a one-life hardcore mode, and the ten music pieces are synthesised live in the browser.

The inspiration came from my obvious passion for space exploration games like No Man’s Sky and Elite Dangerous. But recently, Abyssal Garden, made by a fellow redditor, opened my eyes and gave me a huge push to actually create it.

Claude (Fable 5.2) wrote it in Claude Code, and it took me about four days and 170 commits. My part was the idea, the story, and the taste: I picked every look from mockups, sent the space stations back four times, and chose the music by ear from sketches, because the AI can't hear what it writes.

How Voidstruck was actually made:

Voidstruck is one HTML file of 299 kB. It uses no game engine, no libraries and no asset files. When you open it, there are no images, models or sound files to load, because there aren't any. Everything is computed while you play.

No libraries at runtime. The game talks to the browser directly: WebGPU for the picture, the Web Audio API for sound, plain HTML and CSS for menus and maps. The only tool in the whole project is esbuild, which bundles about 9,400 lines of JavaScript and WGSL shader code into the single file.

The galaxy is a function, not data. Every star is worked out from a seed and its coordinates, with an integer hash and a small random number generator (mulberry32). The disc is 14,400 light years in radius, cut into sectors of 4 light years, and nothing is stored: the same seed always gives the same stars, planets, moons and names. The code that makes the whole galaxy is 9 kB.

Space is drawn by shaders. Stars, planets, rings, nebulae, the black hole and the jump tunnel are fragment shaders, not textures. Each planet's surface is baked once into a small map with a colour table when you arrive. A glow pass picks out the bright parts at quarter resolution, blurs them and adds them back.

Planets are that same map, walked on. Flying down, one full-screen pass marches each ray of sight over the planet's baked surface, so the ground you land on is the planet you saw from orbit. Close to the surface the ground becomes a real mesh of seven nested grids, each twice as coarse as the last, with shadows.

Plants and animals are recipes. A tree, a fern, a fungus or a spire is a "family": a recipe with a handful of dials. Each planet rolls its own species from its seed, so no two worlds grow the same things, and the same world always grows the same ones. The shapes are built as triangles on arrival. The cities of Earth are made the same way.

All sound is synthesised. There are two music systems:
- In space, music is composed as it plays. Each star system draws a key, a mode, a chord sequence and a short tune from its seed, and each kind of star has its own arrangement, so nothing loops and no two systems sound the same.
- Ten written pieces are stored as text: melodies on a sixteenth-note grid ("E5:4" is E5 for four sixteenths) over chord symbols, played by instruments built from oscillators.

The instruments are FM synthesis (one oscillator bending the pitch of another, for bells and electric pianos), detuned saw waves through filters for plucks and pads, and filtered noise for engines, fire and explosions. Even the reverb is synthetic: the "room" is a burst of generated noise that dies away, used as an impulse response.

The rules are separate from the picture. Flight, heat, fuel, jumps, trade, combat and the story are plain functions with no drawing in them, stepped at a fixed rate. That makes them testable outside the browser: 192 automated tests run through them, including whole journeys home.

Where the kilobytes go (roughly):
- Drawing space: stars, planets, rings, the ship, the jump tunnel: 75 kB
- Menus, maps, the flight display and every line of text: 60 kB
- Planet surfaces: terrain, plants, animals, cities: 50 kB
- Music and sound: 45 kB
- The rules of the game and its story: 40 kB
- Input, saving, the main loop: 17 kB
- Making the galaxy: 9 kB

It works best in Chrome or Edge on a desktop, full screen, with sound on.

It’s free, with no ads and no account, and you can play it offline. If something breaks or feels off, please tell me.


r/ClaudeCode • • 4h ago

Built with Claude Golden Thread 0.23, a free Claude Code plugin: run everything on local models, hosted engines or Claude, and control it from your phone

Post image
7 Upvotes

I built Golden Thread, a free, open-source (MIT) plugin for Claude Code, and I built it with Claude Code: Claude wrote the plugin, its hooks and its tests, in a separate git worktree per release. The next release, 0.23, adds the nine things in the image: the workflow builder, then four about engines and four about control.

What it does:

  1. Workflow builder. Describe what you want in plain words and it drafts the steps and suggests a model for each. A discovery agent first lists everything your connected systems can do (GitHub, Jira, Microsoft 365, MCP servers, local engines), so you choose from what exists. Or use a guided form with no model at all. You see the whole workflow as a flowchart, see which engine runs each step and what it costs, run it at set times or on an event, call one workflow from another, and review every effect before you enable it.
  2. Workflow engine. A saved chain of steps you can read: run a script, hand a task to another engine, loop, ask Claude, or wait for you. A workflow names roles (planner, coder, reviewer), never a model. Loops are counted, and a step that keeps failing moves up one engine, then reaches your phone as a question.
  3. Environments. One file says which engines fill each role, cheapest capable first. Switch environment and the same workflow runs on other models. Private text goes only to local engines.
  4. Wizards. Add a local model, add a hosted engine such as Gemini (the key never enters the chat), or connect GitHub, Jira, Microsoft 365 or any MCP by URL. Anything that spends money or widens access needs user security.
  5. Local models do the first pass. Drafts and reviews go to a free engine first, and a different engine checks the result in a read-only copy. Each task type is compared against Claude before it goes live.
  6. Phone remote control. Pair your phone using security gates, then answer question cards, approve or reject an edit from a diff card, or stop a run. A remote run needs a timed, capped window that you open with user security.
  7. Mission Control. A plan splits work into units with budgets, and a small local model dispatches worker sessions whose scope comes only from the signed plan.
  8. A workflow for releases. A 15-stage protocol with four gates a person signs, a release gate that runs tests and a secrets scan, and release notes that carry test counts per platform.
  9. Safety you can audit. Every command gt runs goes into a hash-chained journal, tools get a vetting score before you adopt them, and engine-written code runs in a sandbox.

Free to try: https://github.com/shaven/golden-thread

Clone it, then run: bash golden-thread/golden-thread-plugin/install.sh --vault ~/MyVault

and restart Claude Code.

Which local engines do you run, and what would you want a wizard to set up for you?


r/ClaudeCode • • 2h ago

Discussion Anyone used Claude with Blender for animations?

5 Upvotes

If you have used it what have the results been like for you?

  1. Can you build assets?
  2. Are small animations time consuming?
  3. Do small animations (3-5 seconds) burn lots of tokens?
  4. How would you say the results are like?

r/ClaudeCode • • 3h ago

Built with Claude I still review my agent's code before my team sees it. So I gave it a local pull request.

6 Upvotes

Before, I either read the diff, copied a line, pasted it into Claude Code and asked about it. Or I opened a draft MR, reviewed it there, copied my comments and went back to Claude Code. Every time.

So I built a pull request that sits as close to the agent as possible.

claude-review runs locally and connects to the same session that wrote the code. You leave comments under single lines and ask right there why it did that, or write to the agent about the whole change in its panel. It answers in the thread. No copying, no going back and forth, and you read it all in a proper visual diff instead of a terminal.

Some changes are hard to get at first look though. For those there's Story mode: the agent tells you what it did, how and why, and explains every chunk in the order to read it.

Obviously it was written by Claude. Obviously I didn't review all of it...

It's open source and I'm not selling anything. I'd just like to know what would make it actually useful for you, so any feedback helps.

github.com/vrppaul/claude-review

/plugin marketplace add vrppaul/claude-review, then /review-ui


r/ClaudeCode • • 3h ago

Help/Question juggling sessions, agents, conflicts and different harnesses

5 Upvotes

hey, how would you folks keep track of 5+ claude code / codex sessions juggling all of them?

usually i run a bunch of agents in parallel and honestly i lose track. i.e. one is waiting on a permission, one finished mins ago & i dont notice it for long, two are editing the same files and do conflicting edits bc i use multiple harnesses until they notice they are conflicting

tried tmux, tried just more terminal tabs, it doesnt really scale past 4 or 5 for me, doesnt to context management or include like ralph loop and stuff out of the box or I need to constantly trigger /advisor


i got annoyed enough to try build my own thing, but im curious what everyone else does before i continue building myself. worktrees per session? some dashboard? just fewer agents?


r/ClaudeCode • • 10h ago

Tips & Workflows Asked my Claude lead to name sessions prefixed by priority, and GOSH why didn't I think about it earlier!

Post image
15 Upvotes

r/ClaudeCode • • 7h ago

Discussion If an agent could forget most of its session, what should it be allowed to keep?

8 Upvotes

I've been looking at the recent push toward persistent AI memory, and the part I find more interesting than "give the agent more memory" is the write gate.

A few current projects are experimenting with persistent, searchable or versioned memory rather than treating the entire conversation as permanent state. Anthropic's own agent-memory research also focuses on things like curation, deduplication, pruning, and selective injection as memory grows.

That made me wonder what the actual gate should be.

If Claude Code finishes a task and wants to write something into persistent memory, should it need to answer something like:

- Will this change future behavior?

- Is this a decision or just an observation?

- Is this still true?

- Is there already a memory saying the same thing?

- Would I want a future session to see this?

I'm especially interested in what people who use Claude Code heavily actually keep in memory today.

Do you save decisions? User preferences? Project architecture? Failed approaches? Commands? Or mostly let CLAUDE.md / project files carry the durable state?

I'm not claiming external memory is universally better. I'm trying to figure out what deserves to survive a session in the first place.


r/ClaudeCode • • 3h ago

Tips & Workflows Apple Container for Claude Code

Thumbnail
medium.com
4 Upvotes

AI assistants can now run commands on your computer, but what if one deletes the wrong thing? I tried a free tool from Apple that keeps the AI in a sealed-off box on your Mac, so it can only touch the folder you give it. Here's how to set it up in about 15 minutes.


r/ClaudeCode • • 1d ago

Built with Claude Using Claude for local Sports Clips

180 Upvotes

I made this for a friend’s son who plays football.

https://x.com/setzerelite/status/2122744758569226468?a=_Z8WbEa-v9gsB2AkQzg&s=46


r/ClaudeCode • • 3h ago

Help/Question I feel overwhelmed (and dumbified) about my workflow

4 Upvotes

I'm an iOS engineer with 7 years-ish of experience.

I started to use Claude Code a year and a half ago. I've been more "productive" during this time than in the rest of my career without AI tools. In my company, as a team we embraced Claude Code usage and shipped some features in weeks that would usually take couple months to refine, develop, QA, and send to production. I even published my own side projects. I feel exhilarated by the speed of thinking about something, planning it and shipping it.

But here it is, I feel I am hitting a glass ceiling.
What I was loving about this job was digging into complex issues, go into every investigable way, and finally come up with a clean and stable fix. Also, going from 0 to 1 (from an idea to a feature in production) was something that gave some dopamine shot, and it felt super rewarding. Now, I can just get this shot whenever I want.

The issue today is that I feel I'm slacking when it comes to my workflow using AI.

It feels overwhelming to see "just use x or y model", "software fundamentals matter more than ever", "context is everything bro", "just ship it", "..." etc...

I just don't know where to go, what to do, what to share with my peers at work and how to set up best practices regarding Claude Code usage, because it looks like it is CONSTANTLY changing.

To give you guys an exemple for my side projects, I use this repository as a base: https://github.com/openai/symphony/tree/main
and prompt my agent like this:

This document https://github.com/openai/symphony/blob/main/SPEC.md
is used as a reference for my app project.

As you can read, it is very detailed.

## Project Context
I explain here the context, my goals and my non goals with it

## Tech stack
I specify here what I want to use, most of the time it is "Project is on a native iOS tech stack." and I discuss with the agent to chose a backend architecture and stack.

I want you to act both as Senior iOS Architect and Staff Product Manager, in order to iterate on both code quality and project features. We want to create a SPEC.md file for this project

And then SPEC.md document, which is particularly detailed and breaks down the approach exactly how I want, is used by the agents to implement the project step by step. I do it in one unique convo, and I think this may not the best way to do, which is where your input is more than welcomed.

Regarding the day to day work, now I mostly link Jira tickets to Claude code, give it a bit of a context, what I want to accomplish or fix, what I already tried, and then I review the code. But I do feel I dumbified a lot during last year of AI usage, the fear of losing control on my work is growing more and more every day, and what I see here and on other AI-related subs makes me feel so stupid to not delegate everything fully to Claude, to still review the code manually, and not having a fully fledged automated workflow that works for me. Ultimately, I want to improve my velocity, but I don't want to trade speed with quality.

I don't know what to do, I don't know where to go, the amount of contradictory information available is overwhelming.

Every improvement suggestion is more than welcomed.

Thank you if you've made it to here,
Jay.


r/ClaudeCode • • 14h ago

Discussion What is your opinion on the Superpowers skill?

Thumbnail
youtu.be
28 Upvotes

I just saw this video about how some of the most popular github claude skills are just useless bloatware at this point. It talks about how these might have made a big difference in the quality of work claude would output a long time ago, but claude has evolved so much that all of the processes that these skills add on just makes work take longer + more tokens.

How has your experience been?


r/ClaudeCode • • 6h ago

Tips & Workflows How I run 20 headless Claude Code agents in parallel on GitHub Actions, each with its own phone

6 Upvotes

Each agent gets one iOS Simulator or Android emulator and a persona (device, language, text size, dark mode), uses the app like a new user and writes a bug report with screenshots.

How it works:

  1. One workflow builds the app, then a matrix job per persona boots its device (Linux runners for Android, macOS runners for iOS).
  2. Claude Code runs headless with three tools: see the screen (with tap coordinates), gestures, typing.
  3. Each agent writes its findings with numbered screenshots. Everything is encrypted with your key, because the logs of a public repo are public.
  4. You decrypt on your machine and get one SUMMARY.md.

Last run: 20 agents on LocalSend (100k-star app), 103 issues, 69 min, $4.62 of usage. On plans with a 5-hour limit, run batches of 6 to 10.

Template and Claude Code plugin: https://github.com/pierridotite/mobile-agent-testers


r/ClaudeCode • • 25m ago

Discussion do anyone feel that 6.2 sol is good but not as good as opus 5.5?

2 Upvotes

tbh opus 5.5 is far better then 6.2 sol.

opus understood myt design instructions much better and needed fewer corrections , while with sol, i found myself explaining teh design multiple times