r/CounterTops • • 4h ago

Identifying countertop material

0 Upvotes

How can I go about telling what countertop material I have so I know how to care for it?

The home listing said white quartz, but I'm not so sure since it doesn't feel like it's an engineered material. I've never had anything other than Corian or formica before though, so maybe I just don't know what quartz counters really are like other than photos I've seen. I can confidently say it's not granite. It doesn't look remotely like any granite I've ever seen; this pattern looks like marble.

This counter goes through the entire large kitchen and all 3 bathrooms, so I'm thinking it's very likely not real marble, even though it has grey and slightly tan/brown veining through mostly white material that's not like fully white opaque (kind of transparent-ish?). I think real marble everywhere like this would have been very expensive, and other tiling in the house is actually printed tile; I would expect an owner willing to spend a lot of money putting in real marble counters everywhere wouldn't have then "cheaped out" on other fake stone tiles in the bathroom floors and showers. Plus, even though the home wasn't cheap, it's also not a rich people house in an area where you'd expect a lot of money invested in top quality materials in every inch of the space.

Looking underneath a lip, it looks like the veining goes all the way through as opposed to being like printed on top, but it's hard to tell. There's a pretty visible seam where the kitchen counter makes an L shape in the corner. The underside surface feels somewhat rough compared to the polished smooth top. The counter is cool to the touch.

I'll try to get photos when I can if others are able and willing to help ID this stuff.


r/CounterTops • • 5h ago

What floor and counter top with this backsplash?

Thumbnail
reddit.com
1 Upvotes

r/CounterTops • • 5h ago

Green soapstone countertops

Thumbnail
gallery
35 Upvotes

For context I’m a kitchen designer and have always loved the natural properties and beauty of soapstone, so when I came down to choosing my countertop I knew I wanted a variation of a soapstone. I found this beautiful green soapstone the first photo shows what I feel in love with at the yard. I asked the fabricator and stoneeyard to leave it raw unfinished as I wanted to live it and developed a natural patina and if I decided to oil it down the like I could. However they did finish it I’m not sure if they used a wax or sealer, and the finished product is still beautiful just not the finish I wanted. I decided to try to test strip the sealer off myself and I think I need sand it down as the finish is now a litttle splotchy. I do love it both with the deap tones and the soft matte pale green/grey the unfinished stone gives. Should I leave it sealed or strip the rest down and let it naturally patina.

The first kitchen photos are sealed and the last photos are my test of stripping the seal on a smaller slab in my kitchen


r/CounterTops • • 8h ago

What do you think ??

Thumbnail
gallery
4 Upvotes

r/CounterTops • • 11h ago

Custom Stainless Counters with Welded Sink

Thumbnail
gallery
0 Upvotes

So, I’m redoing my kitchen. Sort of.

I have a beautiful stainless steel sink that I want welded into a stainless countertop. The local metal works is agreeable to weld the sink and build the counter. I must supply the underlay which they will wrap in stainless steel while welding the sink. My contractor has to have all of the holes cut in the correct place and it will be a 3-4 week turn around.

Counter details:
U shape: 5 feet where the stove/range is then 12 feet where the sink will be then 8 feet for the other side of the kitchen.
Backsplash will be 4” along the entire counter
Welder will use 18G steel given the size and weight of the sink.
The sink needs 38” counter clearance.

Questions:
I’m considering a single post faucet that has a pullout sprayer. Would you have 3-4 holes cut into the counter anyway? I’m thinking two extra holes in case I decide to get the boujie faucet (it’s $5,000) I want in the future and one extra hole for the dish soap dispenser. Never really use the soap dispenser because they’re a pain to fill and you never know when it’s empty. Also, if I do have extra holes cut, what would I cover them with? The sink has these really nice basket strainers that would fit perfectly to cover the holes so I wouldn’t just order more basket strainers.
I was advised to have between 1” and 2” counter underlay. I’m leaning towards 1.5”. He said I can use whatever material I like so, recommendations?
Anything else to consider that I may be missing?

Mock up of the kitchen and picture of the sink for reference. Separate pic of the basket strainer.

I’m planning to have the counter to the welder near the end of January.

Keeping my same cabinets and appliances.


r/CounterTops • • 14h ago

Where to buy pure, non-staining clear silicone bumpers/spacers 1/2”x3mm locally in Metro Vancouver?

1 Upvotes

Hi everyone, I’m placing a heavy tempered glass tabletop onto a natural marble surface and need clear spacers to keep the glass from sliding or scratching the stone.
I want to avoid standard hardware store vinyl, PVC, or cheap rubber bumpers because plasticizers and oils can leach into natural marble and leave permanent dark stains.
• What I'm looking for: Clear, non-staining, non-migrating 100% pure silicone bumpers or setting blocks (ideally non-adhesive, or safe to stick only to the underside of the glass).
• Size: Around 1/2" (12.7mm) diameter and 3mm thick.
• Area: Anywhere in Metro Vancouver (Delta, Surrey, Richmond, Burnaby, Vancouver, etc.).
Does anyone know a local glass shop, stone fabricator, or industrial rubber/plastics supplier around the Lower Mainland that sells pure silicone spacers or 3mm pure silicone sheet cutoffs to the public?

Thanks in advance!


r/CounterTops • • 18h ago

How to draw and quote a waterfall island with a mitered apron (and custom-shaped backsplashes)

Thumbnail gallery
1 Upvotes

r/CounterTops • • 18h ago

Help finding an affordable dupe

3 Upvotes

Hi! I am hoping for some guidance and recommendations. I LOVE the Cambria Inverness Blakely but it is out of my budget. Is there a quartz dupe or close enough because you’re saving money quarts that has the same look as the Cambria. I am trying not to spend 20k on countertops for my kitchen.


r/CounterTops • • 19h ago

Suggestions for repair

Thumbnail
gallery
2 Upvotes

Came home from work to see this bulge in the seam of my countertop near the sink. I think my daughter left a wet cloth on top of the seam. I’m drying it out now but I doubt it’s going to shrink much. Replacing our entire countertop isn’t an option and the seam is right at the sink.

How the heck can we fix this and close it back up to be water tight?


r/CounterTops • • 22h ago

*Renting* How to cheaply redo kitchen counters?

Thumbnail gallery
1 Upvotes

r/CounterTops • • 22h ago

Quartzite - Will these slabs be prone to etching?

Thumbnail
gallery
3 Upvotes

As the title says, I am curious if anyone has installed or seen slabs like this and if they look like they would be prone to etching / staining relative to something like Taj.


r/CounterTops • • 23h ago

Moving into this apartment soon! Any ways to improve the look of these?

Thumbnail gallery
1 Upvotes

r/CounterTops • • 1d ago

New quartzite countertops – how do I properly clean and care for them?

1 Upvotes

Hi everyone!
I recently got brand-new quartzite countertops, and I’m looking for some advice on how to properly clean and maintain them.
I’m completely new to natural stone countertops, so I’m still learning how to take care of them. So far, I’ve only used water and a little bit of Dawn dish soap to clean them. However, I’ve noticed some streaks and cloudy areas that make the surface look almost dusty or hazy.
I’ve been doing some research, and I’ve read that it could be sealer residue or sealer streaks, but I’m not sure.
My questions are:
What is the best way to clean quartzite countertops?
What products do you recommend for everyday cleaning?
Could the cloudy appearance and streaks be caused by excess sealer?
Is there a safe way to remove those streaks without damaging the stone?
Is this something I should bring up with the installer?
I really don’t want to ruin my brand-new countertops by using the wrong products or cleaning methods.
I know these things might seem obvious to people who have experience with natural stone, but I’m a young homeowner with zero experience in this area, and I’d genuinely appreciate any advice or recommendations.
Thank you so much for your patience and for taking the time to explain things to someone who’s still learning how to take care of her home. I appreciate it!

Btw I don’t want to rely on ai so I thought I would get better help asking here ❤️‍🩹


r/CounterTops • • 1d ago

Honed Taj Mahal staining?

Post image
1 Upvotes

We are considering honed Taj Mahal. Long story, we have had staining/bleeding issues with quartzite (Bellagio? I think). For those who have had honed Taj Mahal in the kitchen, have you had any issues with staining, bleeding, wet spots at all?


r/CounterTops • • 1d ago

Marble Suggestions - Green Kitchen

Thumbnail
gallery
6 Upvotes

Hello everyone, i would love to hear suggestions for what stone we should pick as the countertop and backsplash. We are set on doing a marble or quartzite, with a preference for marble. The cabinets are a dark green and its a rather smaller enclosed kitchen. In the second photo, the stone will extend into the empty space on the left to create a tabletop for sitting. Any suggestions for what marble / stone would look good here?


r/CounterTops • • 1d ago

Honed granite has swirls from slab yard

Thumbnail
gallery
2 Upvotes

So I didn’t see these swirls until after install. I picked these honed via lactea granite slabs from a yard. My fabricator bought them from the yard and installed. My fabricator “measuring” guy already said it’s not really possible to fix the swirls without making it worse, I don’t think they have a restoration person on staff.
Is that bs? Can they be fixed? Who’s responsible? Fab or yard? I’m waiting to hear back from both the fab and the yard on “next steps”

We already tried cleaning with alcohol and nothing budged.


r/CounterTops • • 1d ago

Non-Taj quartzite options known for high quartz content?

5 Upvotes

Hi all,

I will be selecting a lighter quartzite counter top. After reading some comments on this sub, it seems that quartzite slabs can differ in quartzite content (I.e. may have more filler). I have seen comments that say Taj Mahal and only a few other types of quartzite are the real deal.

I understand that having “filler” might not necessarily be a bad thing or mean the slab is unnatural. I am aware that granite is mixed with other naturally occurring minerals. However, I have read that these fillers can change the performance of the countertop and that Taj is typically a high content which is why it is known to work so well. Since I am getting a lighter counter top, this matters to me.

I don’t really want to jump on the Taj train, so I am looking at other options. Does anyone know anything about typical quartz content by quartzite type?

I am specifically looking at:
- Mont Blanc
- Bianco Superiore
- Matira
- Matterhorn

Thanks all!


r/CounterTops • • 1d ago

Does this splash need a seam?

Thumbnail
gallery
2 Upvotes

Fabricator says there have to be two seams for the full height backsplash but I’m not understanding why. Can anyone explain if the seams are really necessary?


r/CounterTops • • 1d ago

Granite vs Quartz – Which One Is More Challenging to Work With?

0 Upvotes

For those working in stone fabrication, I'm curious!

Which material gives you more trouble in your daily work?

🔹 Granite
🔹 Quartz
🔹 Porcelain

And why? Is it cutting, polishing, chipping, or something else?

Always interesting to hear how different shops handle these challenges. We at Skyline Stone Products love discussing stone fabrication tools and techniques.

What's your experience? 👇


r/CounterTops • • 1d ago

Round 2 Quartz issues.

Thumbnail
gallery
0 Upvotes

Right after I asked how to help remove pencil marks I went to go clean the property and I found all of these stain/marks. What in the actual F are these?! Is this typical of quartz? I've never had quartz counters before and I thought they were not porous. I'm going to try the Barkeepers friend by itself, and then with alcohol and then with vinegar. Is this typical with these counters though? They get marks and stains if you just look at them wrong, seriously wtf.


r/CounterTops • • 1d ago

Ball park estimate on removing and reinstalling quartz counter top during kitchen floor renovation?

0 Upvotes

Is $500 worth the removal and reinstalling of a quartz countertop? It measures 105x25 and a half inches. The sink is also bolted on from the bottom of the countertop. The person doing the countertop work is not the same one tiling the kitchen floor.


r/CounterTops • • 1d ago

Acceptable seam?

Thumbnail
gallery
6 Upvotes

New countertops, quartz Calacatta gold color. Is this seam acceptable?


r/CounterTops • • 1d ago

Large Format thin tile

Thumbnail gallery
3 Upvotes

r/CounterTops • • 2d ago

Six Year Old Quartz, Possible Film/Coating Issue

Thumbnail
gallery
2 Upvotes

The counter top is not near the sink or stove. Seems like there is some film coming off of it or possibly surface deterioration? Any thought? Never had nicer counters before so trying to figure out next steps. Thanks!