r/DIYMetalDetecting • • 14h ago

Get to know us https://sandwormrobotics.com/

1 Upvotes

r/DIYMetalDetecting • • 12h ago

My DIY rover is getting pretty good at finding metal across the field. Unfortunately, that includes the junk 😂

5 Upvotes

Every signal feels like it could be treasure. Sometimes it’s just another rusty bit of metal. Still having a great time seeing what this little rover turns up!


r/DIYMetalDetecting • • 14h ago

Our metal detection treasure-hunting robot has made good progress.

2 Upvotes

It has been a while since we last updated on the progress of our detection vehicle. During this period, we have been continuously focusing on technological research. We have now successfully developed our own remote controller, and our detection information can be displayed both on the remote controller and marked on a map. Next, we will continuously test and debug our self-developed disk data to make it more effective. The second video has already implemented a simple automatic route planning function.You can come to learn more. https://sandwormrobotics.com/


r/DIYMetalDetecting • • 4d ago

Here's our metal-detecting rover

5 Upvotes

I'm part of the team working on Sandworm, a remote-controlled metal-detecting rover. Sharing our latest video so you can get a look at it.

Happy to answer questions about the setup and how it works.


r/DIYMetalDetecting • • 5d ago

Our metal detection vehicle is undergoing testing.Took our metal-detecting rover out for a test yesterday

1 Upvotes

We took our metal-detecting rover, Sandworm, out for a test yesterday. Here's some footage from the session.

I'm part of the team working on it. Happy to answer questions about the setup or the test.


r/DIYMetalDetecting • • Sep 28 '26

Our metal detection vehicle is undergoing testing.

2 Upvotes

r/DIYMetalDetecting • • Sep 24 '26

The third-generation chassis is currently being assembled.

Post image
3 Upvotes

We will proceed to testing once everything is installed. The changes in the third generation are quite significant, so please pay attention to our test structure.


r/DIYMetalDetecting • • Sep 20 '26

The project has a home now — our site is live (build logs, the rover, and the waitlist)

1 Upvotes

Quick one — we finally put up a website for the project: https://matchbox-tech.com/

What's on it:

Nothing is for sale yet — we're still in R&D, and this community is still where the real conversation happens. The site is just the project's home base.

Tell us what's missing. What do you want documented that isn't there yet — coil design, wiring, test data, terrain tests? We'll build it around what you actually want to read.


r/DIYMetalDetecting • • Sep 17 '26

Build Log This is the testing result of our second metal detection vehicle on red soil.

1 Upvotes

We have already resolved the issues of low-speed performance and metal plate interference on the vehicle. We will test and research the automatic cruising function in more diverse terrains and landscapes. We have identified different issues to address in the improvements of our third-generation metal detection vehicle. However, we also face a problem where our metal detection plates may produce false alarms.


r/DIYMetalDetecting • • Sep 11 '26

Development Log # 4: Low Speed Barriers Improved through Capability

Post image
1 Upvotes

Having solved the problem of metal detection interference, we turned our attention to a new problem that emerged in low-speed tests: the rover struggled to overcome obstacles when moving slowly. This journal records our findings and remediation efforts.

Observed problems

In controlled tests on uneven terrain, the Gen2 prototype performed well at moderate speeds, but struggled slowly over rocks, roots and small slopes. At low speeds, the rover sometimes loses power and is unable to climb obstacles that are supposed to be within its capabilities. This is a concern because precise, slow movement is essential for a full scan.

The investigation found

We investigated two possible reasons: power output and control algorithms. In terms of power, we found that the motor's output torque at low RPM was not enough to maintain traction on rolling ground. On the algorithmic side, the speed control ring is too conservative at low speeds, causing a delay in accelerator response when the rover encounters resistance.

Measures for improvement

We made adjustments in two areas. First, the motor drive parameters were recalibrated to provide a more consistent torque output in the full speed range, especially at low speeds. Second, the speed control algorithm was updated to respond more quickly to sudden load changes, and a specific low-speed compensation curve was added to prevent deceleration on slopes or obstacles.

Result

Now rovers are more reliable when dealing with obstacles at low speeds. In repeated tests on mixed terrain, it was able to climb small rocks and uneven ground without losing speed or straying from its established path. This improvement is particularly pronounced when slow scans pass, where stability and accuracy are the things that are most valued.

Follow-up plans

With this issue resolved, the Gen2 prototype is ready for its first full outdoor field test. We will evaluate the full system - including mobility, detection and data recording capabilities - to operate in conditions as close to a real treasure hunt as possible. When the test is complete, we will share the results here.


r/DIYMetalDetecting • • Sep 07 '26

Build Log This is what we found in our recent metal detector test.

Thumbnail
gallery
2 Upvotes

r/DIYMetalDetecting • • Sep 04 '26

Development Log #3: The interference issue has been resolved, and preparations are underway for field testing.

Thumbnail
gallery
4 Upvotes

Over the past few weeks, we have focused on resolving the issue of interference between the metal detection system and the chassis of the detection vehicle. We are pleased to report that this problem has now been resolved.

Modified content.

After conducting a series of tests, we made two key adjustments. First, we rearranged the detection coils to keep them away from the motor and high-current wiring of the detection vehicle. Second, we modified the structure of the chassis section to reduce the presence of metal components near the sensing area. Additionally, we added shielding to several electronic components to reduce electromagnetic noise.

Result

Now, even when the detector vehicle is moving under normal operating conditions, the detection system can produce clean and stable readings. Background noise has been significantly reduced, and the system can clearly identify buried metal objects during controlled tests.

the next step

The interference issues are a thing of the past, and the Gen 2 prototype is ready for its first real outdoor field test. We will take it to a mixed terrain site to evaluate the entire system under conditions as close to a real treasure hunt scenario as possible—including mobility, detection, and data recording capabilities. We will release the results after the test is completed.


r/DIYMetalDetecting • • Sep 03 '26

Development Log #2: Steering repair completed, metal detection system installed for the first time.

Post image
4 Upvotes

Based on issues identified during the initial driving tests, we have redesigned the steering system. We are now pleased to report that the steering response of the Gen 2 detection vehicle has significantly improved. Upon completing these enhancements, we took the next step: installing the metal detection system on the platform for the first time.

Operation Content

We tested the updated steering configuration on the same mixed terrain as before, and the exploration vehicle demonstrated improved maneuverability on narrower paths. After meeting the performance criteria, we installed a metal detection module and conducted a series of static and low-speed tests

Issues discovered

Although both systems function normally when operating independently, we immediately noticed interference when they ran simultaneously. The metal detection readings became noisy and unstable, particularly noticeable when the detection vehicle's motor was running or when the detection coils approached undercarriage components. Clearly, the vehicle's body structure and electronic components are introducing unnecessary noise into the detection signals.

Future Plans

The detection system must be isolated from electrical and structural interference of the detection vehicle. We will address this by optimizing coil placement, implementing shielding measures, and adjusting the chassis layout. This is a critical challenge that must be overcome before meaningful field testing can proceed.


r/DIYMetalDetecting • • Aug 28 '26

Build Log Gen 1 of my DIY metal-detecting rover: I moved every electronic to the back to protect the coil — now it barely turns

Post image
2 Upvotes

I'm building a small rover that carries a metal detector so I don't have to walk a beach for hours. This is the honest write-up of Gen 1, and it's the reason I started this community — so people can see the process, not a polished product.

The problem Gen 1 was trying to solve

The search coil at the front is ridiculously sensitive to electrical noise. Motor PWM, power cables, a microcontroller, a voltage regulator — any of it close to the coil turns a clean signal into static. Air tests on the bench were perfect; the moment I mounted the coil on a moving chassis, it was all noise.

So I made a simple decision: move every electrical component to the back of the car. Keep the front — the coil's sweep zone — completely passive. No motors, no wires, no boards anywhere near it.

What that decision turned the car into

  • All the electronics, the battery, and the drive motor ended up at the rear
  • Which made it rear-wheel drive
  • And, because that's where the weight and the motor now lived, rear-wheel steering

It looked right on paper. The coil stayed clean, and the noise problem went away. I thought I'd won.

Where it went wrong — the steering

Turns out rear-wheel steering on a small rover is not a free lunch:

  • The steering angle I need is way too large, and with all the weight at the back, every correction wants to swing the rear end wide
  • The car drives like a forklift in reverse: the front (where the coil is) reacts late and opposite to every turn
  • Precise coil sweeps — the whole point of the machine — became a fight. I'd line up a grid pass, steer to correct, and the rear would crab sideways past the target

So the trade-off that fixed my noise problem gave me a car that's hard to steer exactly when precision matters most.

What I'm taking into Gen 2

Not posting it yet — but the two words are "front steer" and "shielding." More in the next build log.

Question for you

If you were splitting the electronics to protect a search coil, would you shield the coil, or shield the electronics — and why? I've been going in circles on this one and would genuinely like to hear how others would approach it.


r/DIYMetalDetecting • • Aug 28 '26

What makes r/DIYMetalDetecting different?

1 Upvotes

r/DIYMetalDetecting is a friendly, inclusive community for everyone who loves metal detecting.

Whether you build your own detectors and gear, you're tinkering with a machine you own, or you simply enjoy getting out with a coil — this is your home. You don't need to be an engineer or an expert. If you're curious and you like the hobby, you belong here.

What this community is for:

  • Getting help — stuck on a build, a coil, a ground-balance issue, or a detector that's behaving oddly? Ask. Our members are glad to help from experience.
  • Sharing ideas — swap techniques, tips, detector comparisons, and design ideas. There's always something new to learn from each other.
  • Sharing your finds — dug up a coin, a ring, or just a fun story? Show us — we love seeing what's out there.

Whether you're a first-timer or a seasoned detectorist, whether you build your own gear or use a store-bought machine, this community welcomes you. We keep things friendly, helpful, and respectful — no judgement, no sales pitches, no spam.

Come in, say hi, ask a question, or share what you found. Let's enjoy this hobby together.


r/DIYMetalDetecting • • Aug 28 '26

Welcome to r/DIYMetalDetecting — Start Here: Rules, Flairs, Resources & How to Get Help

1 Upvotes

Welcome, detectorists and tinkerers!

This is a community for metal detecting, made by hand. Build your own detector, mod or repair an existing machine, wind a coil, print a shaft, program a control box, or strap a detector to a rover — the build is the heart of this place.

And the hobby around it is just as welcome: share your finds, tell hunting stories, ask which detector to buy, or argue about VLF vs PI. You don't need to be an engineer — you just need to like the hobby.

What belongs here

·         Builds, mods & repairs — detectors, coils, pinpointers, probes, shafts, control boxes, rovers, software

·         Theory you can actually use — VLF vs PI, induction balance, discrimination, ground balance, coil tuning

·         Honest engineering — failed prototypes, oscilloscope screenshots, breadboard blobs, the fail pile

·         Finds & stories — what you dug up, where you hunted, how it went

·         Questions & opinions — buying advice, technique, parts sourcing, comparing machines

·         Helping each other debug — this is the community's quality bar

What doesn't belong

·         Buying, selling, deals, affiliate links, or channel promotion (Rule 3)

·         Off-topic content — politics, unrelated hobbies, anything not about metal detecting

·         Anything illegal or unsafe (Rule 4)

Flairs — pick one when you post

FlairUse it for
Build LogDocumenting a build in progress
Build ShareA finished or in-progress project
Show OffA completed build (photo + short summary required)
Help"It doesn't work" — see Rule 5 below
QuestionGeneral questions about detecting or building
DiscussionOpinions, comparisons, theory debates
ResourcesOpen-source projects, schematics, tutorials
FindsWhat you dug up
StoryHunting trips and experiences

How to get help — read this before posting "it doesn't work"

Help posts must include (Rule 5):

1.     What you built or are building

2.     Schematic or parts list

3.     What you tested (ground vs air, coil, target, frequency)

4.     What you observed — photos and videos welcome

5.     What you've already tried

A post that only says "it doesn't work, pls help" will be removed after 24 hours and you'll be asked to add context.

Start here: recommended reading

·         VLF vs PI — understand which you need before buying parts. VLF discriminates (coins vs iron); PI goes deeper in mineralized soil. Both have great beginner builds.

·         Arduino PI detector — the classic single-coil pulse-induction circuit is the best first project: cheap, forgiving, and it teaches you everything.

·         Air tests lie — a detector that beeps at a coin on your desk often fails in real ground. Test on buried targets and document soil conditions (wet sand, mineralized dirt).

Community spirit

Ask dumb questions. Show ugly prototypes. Post the fail pile and your best finds side by side. Half of the best builds here will start as a breadboard blob — we want your blob.

The mods (find us in the sidebar): [your mod u/names]. Modmail us any time — we read everything and we respond.