r/DJSetups • u/bigspicyheed2 • 2h ago
r/DJSetups • u/FewMedicine4017 • 1d ago
First Technics joined the chat !
I honestly think i've gotten my dream setup.
Mixer: XONE 92 mk2. Bought this one last year in europe when i was visiting some friends and family.
Technics SL 1210M3D x2. These were brought to me by a friend a few days ago. Paid 1700€ for them and they've had the pitch serviced before being brough over.
I've also got 2 cdjs 2000 that i lent to a friend for an after party.
r/DJSetups • u/mev5me • 3d ago
Putting a laptop under the controller is a sick idea, IMO.
r/DJSetups • u/Logical_Dragonfly_92 • 3d ago
Me 47m (left) and my son 16m (right) setups
r/DJSetups • u/papidosveces • 4d ago
We are groovin
Xone 96, pair of XDj 1000MK2s and a U turn orbit.
Then have the production table.
Blessed and super proud of my set up.
Still need to clean it up but this is what I’m working with.
r/DJSetups
•
u/illestrax
•
4d ago
Custom built DJ booth
Finally finished my custom-built DJ booth and thought I’d share the result!
I designed and built the entire enclosure myself to fit my setup. It houses two turntables, an Allen & Heath Xone:96 and a Native Instruments X1 MK3, with everything integrated into one clean setup.
What’s even more special about this project is that it was my first bigger woodworking project. I had some smaller DIY experience before, but nothing quite like this. I’m pretty happy with how it turned out!
A few details about the build:
Custom wooden enclosure: Built entirely from scratch, with a black finish.
Height-adjustable desk: The whole booth sits on an electrically height-adjustable desk frame, so I can adjust the working height whenever I need to. It also has a built-in charging connection for my MacBook.
Single power connection: There’s a power strip installed inside the booth where all the equipment is plugged in. This means there’s only one single power cable coming out of the entire setup.
Cable management: There’s a dedicated compartment underneath the mixer with plenty of room for cables and connections.
Magnetic access panel: The wooden panel for the air intake is attached magnetically, so I can easily remove it whenever I need access to the cables.
Cooling: Integrated fans to provide airflow inside the enclosure.
Scratch protection: Added foam pads at the contact points to protect the equipment and the wooden surfaces from scratches.
DIY Decksaver: I also made a removable cover to protect the equipment from dust when it’s not in use.
The cover might make the whole thing look a little like a coffin when it’s on top, but it cost me less than €20 to make, which is considerably cheaper than buying individual plastic Decksavers for everything.
The setup:
2x Reloop RP-7000 MK2
Allen & Heath Xone:96
Native Instruments X1 MK3
Overall, I’m really happy with how it turned out. It took quite a bit of planning and building, especially for my first bigger woodworking project, but having everything integrated into one custom booth was definitely worth it.
What do you guys think?
r/DJSetups • u/Virtual-Employ4050 • 5d ago
One of my mobile setups
RCF EVOX J8 speakers
Both Lighting BPM Splash-X (battery powered moving head, wireless DMX)
Betopper L1015 (on the floor)
Rockville Haze
2 Shehds Constellation 6w lasers
Not in picture, XDJ-XZ
I have another setup with 2 totems and I put Both Lighting IR4 par led's inside the totems to light them up.
r/DJSetups • u/B2bBattleHomeProject • 6d ago
Dual Traktor MX2 controllers running into an analog Xone:23 for our hybrid B2B setup.
Built this routing to run two independent Traktor MX2 instances into the analog filters of the Xone:23. No sync cable between laptops, just manual beatmatching on the fly.
How are you guys handling dual-laptop B2B routing nowadays?
r/DJSetups • u/Dj-007-manchester • 6d ago
Inside the man cave!
Thought I'd join the party!
r/DJSetups • u/Cre8t1veAZ • 7d ago
Jumping back in.
After more than two decades of not having a rig I jumped back in a big way.
r/DJSetups • u/CrazyHornz • 7d ago
It’s not that fancy,but it’s mine
Here’s my average setup at home.
I don’t Dj anywhere else so this does me wonders.
IKEA shelves with one layer dividers removed.
DDJ 1000. MIni Mac. 24” screen.
Rokit 8”
Polk Audio sub.
Plants too.
r/DJSetups • u/BikelifeHero • 7d ago
Nothing fancy but gets the grooves playing
$100 at home depot and got a table to hold my beer
r/DJSetups • u/No_Instruction_8451 • 8d ago
Basement Setup
- Technics M3
- Technics M3D
- Reloop RP-7000 Mk2
- Pioneer CDJ 900
- Vestax PCV-275
Shelves are made using stair treads from Home Despot.
r/DJSetups
•
u/Bitter-Egg1784
•
11d ago
Life finds a way
Broke 18 year old. I love DJing. I bought this $20DJ mixer, two $10 cd players, and all the cds I used were my dad’s old collection. I’ll link to the set once I get it on YouTube.
Edit - here is the set https://youtu.be/p-G_VnNAmMQ?is=35SG_hv8gGyHQ50H
I really tried here, it’s not great but I have to start somewhere
r/DJSetups • u/halfbroken_ • 12d ago
Where I learned mixing records
I had the keys from this place and would regularly spend the weekdays putting on some lights and practicing.
r/DJSetups • u/Difficult-Poetry7260 • 12d ago
Home studio.
after a month of searching markets and looking for gear, I finally managed to finish my home studio. One more thing left which arrives next week: Adam Audio T7V speakers and we’ll be ready to take-off :)
r/DJSetups • u/GSTP_DJ • 13d ago
Got my first twin CD player
Numark CDN-32S was the first DJ CD player I learned to spin on but I decided to go deeper by purchasing this Denon DN-2000Fmk3.
It's absolutely amazing!
It was made in Japan in 1999 but it's barely used, I feel. VFDs are bright and shiny and their glasses have just a few small scratches. Transports read discs very fast but the loading trays require belts replacement because they move pretty slow. Also, there are signs of rough installation to the 19-inch rack on the main unit.
I was spinning on this Denon for ~1.5 hours without any tests prior and there were no issues. Now I'm on the way to integrate it in my setup permanently.