r/Detailing • • 35m ago

I Need Help! (Time Sensitive) IS THIS STILL REMOVEABLE INEEDHELP

Thumbnail
gallery
1 Upvotes

I recently had my motorcycle washed, and afterward, I noticed a hazy residue on the paint, possibly from dried soap left behind. The first photo shows how it looks when dry, while the second photo shows how it appears when wet. I also tried using a water spot and mineral deposit remover, but it seems to have made the finish even hazier, as shown in the third photo.


r/Detailing • • 4h ago

I Have A Question Favorite protective combos.

1 Upvotes

Griots 3 in 1 ceramic plus speed shine vs bead maker plus dream maker.
Which one would you choose?


r/Detailing • • 4h ago

I Have A Question PPF + ceramic technique and system

Post image
6 Upvotes

Newbie here. Have a skyscraper grey bmw x5 with front PPF and ceramic

For now, only have access to a high pressure spray wand for water

Would appreciate any recommendation on process, techniques, and products to use to protect and maintain the PPF + ceramic


r/Detailing • • 6h ago

I Have A Question Amazon messed up my order.

1 Upvotes

Noob here. Ordered P&S carpet bomber. Amazon sent me Terminator instead. I'm currently not in the position to return it, so with that in mind, what can and can't I do with it?


r/Detailing • • 7h ago

I Have A Question Headlight Restoration Foggy after 2K Clear Coat

Thumbnail
gallery
2 Upvotes

I attempted to restore my headlight with, uh, a lack of clarity on the process. I followed the Chris Fix video and my first attempt lead to cracking when I applied the clear coat. I sanded to 2000 grit and the paint didn’t adhere.
For my second attempt, I sanded the cracked clear coat off with 600 grit. It took me a lot longer than I expected and I was applying a fair amount of pressure hand sanding. Once I got the cracked clear coat off, I sanded with 800 and 1000 grit to get a nice even cloudy lens. I cleaned the lens with isopropyl and used a tack cloth. Then I sprayed rustoleum 2k in three super light layers.
It looked pretty cloudy after the clear coat application and there was some orange peel. I let it cure for over 24 hours and then did some very light sanding with 2500 grit.

At this point, it’s still pretty cloudy… I also see some weird artifacts that look like they are deep in lens.

What do I need to do here? Do I need to sand some more and just put some wax on?
Did I put the clear coat on too thin and I need to do another coat?
Do I need to sand it back down and try again?
New headlight?
Thanks!


r/Detailing • • 8h ago

I Have A Question Pesto spilt on perforated seat

Post image
3 Upvotes

Yes you read that right. My wife left a leaking bottle of Costco pesto on the seat for a few hours. I cleaned the surface up with APC and followed with a leather cleaner but it most definitely made its way through the perforations.

Anything I can really do besides what I’ve done? Any tips and help is appreciated. Can smell the pesto with the heat warmers on.


r/Detailing • • 9h ago

I Have A Question Wondering if anyone has any tips to make quick work of vinyl flooring in fleet trucks(and exterior)

Post image
1 Upvotes

Hey guys. I have owned a detailing business for a couple of years now and accepted this new account of fleet vehicles from a collision center. I am wondering if there are any techniques or products that you guys have found to be helpful making quick work of these cars.

I have been using a 2gal pump sprayer with 1:2 degreaser in it, as well as a wet vac that I bought for them specifically. I basically let it all soak in degreaser and then vacuum it, wiping it up afterwards but it still uses a ton of towels! I am wondering if you guys know a better way, also if you know something better than Mothers VLR to re-saturate and darken the flooring.

Also these trucks come with a lot of mud on the exterior. The shop itself pressure washes them before I even see them just to make my life easier, but my job is to get the rest. Is there anything I could be putting into my foam cannon that will just melt the mud off better? I use Adams car shampoo, the blue kind, and it does pretty good but there might be tricks out there that I don't know about.

Thanks for any help it is much appreciated! I don't usually accept accounts like this but I tend to get slow in the winter and they are next door and can drop them off so it is whatever. I'll probably hire someone else to do them later haha


r/Detailing • • 11h ago

I Have A Question What gets rid of this horrible underbody grime?

Thumbnail
gallery
4 Upvotes

what can i do to clean off the discoloration affecting the entire underbody of this jeep? this seems to my novice eye as a job for dry ice blasting and prayer but curious if anyone has tips to bring some freshness back to this 25yr old car. high psi water has some affect but nowhere near enough. i’m here in the desert south west and the car lived in vegas forever so just a lot of dust and dirt pretty much grit blasting the car but there’s definitely black paint underneath a lot of what’s pictured


r/Detailing • • 12h ago

I Have A Question Scratch cover up & sealer for Black Acura RDX bumper

1 Upvotes

Does anyone know what products work well on Acura's for covering up scratches and sealing it. Got some paint transfer that needs to be dealt with too but I'm more worried about the after effects of cleaning it.

Thank you, any advice helps.


r/Detailing • • 12h ago

I Have A Question Baked on brake dust removal

Post image
1 Upvotes

Hello! I recently bought a car that has one wheel that has what appears to be thick baked on brake dust. I’ve tried superior products wheel acid, wheely clean and a few other wheel cleaners. If I let them sit on there for awhile and scrub it, I get a little off each time. Is there an easier way, or just keep repeating until it’s all gone? Thanks!


r/Detailing • • 13h ago

Work Product- Look At What I Did Bringing the paint back to life on a 93 f250.

Thumbnail
gallery
26 Upvotes

Not perfect but brought it back to life. Love working on these old trucks/paint.


r/Detailing • • 13h ago

I Have A Question Which method would be best to wash my car in Apartment setting?

1 Upvotes

So I have a 2004 VW Beetle Convertible and want to wash it. Mind u I barely used to wash it due to leaks in the roof but I want to wash it more often. I live in an apartment where I do have access to a hose spigot but can't hook up a hose or apartment complex would be upset, but I can fill up my bucket as many times as they said. So I am buying a bucket kit that has wash mitt, rinseless sponge, tire brushes, etc. but I've been looking at rinseless wash soaps cuz many say that's the best way to wash the car when in a situation like mine. But I was wondering, could I also get away with doing the 2 bucket method with normal car soap and for "rinsing" to use a small Tupperware to pour water over the soap to "rinse" it off?

So summarized, in an Apartment with no hose situation, should I use the rinseless method or 2 bucket method with normal car soap and pour water to rinse it off?

Edit: I have already ordered a manual pump sprayer that "can foam" from AliExpress for now. I am also buying a 1200gsm 24 x 26 towel also. I just don't know if I should do rinseless only or do normal soap like an old school bucket and soap wash and rinse with a Tupperware container. Unless the pump sprayer can work to rinse off but I'd doubt that.


r/Detailing • • 15h ago

I Have A Question Cleaing a dirty interior, where to start?

2 Upvotes

My mom and I are going on a trip later this week and I wanted to clean up her car. It's a CR-V.

There are crumbs and dirty stuff on the center console. It's been a while since I've cleaned up a car like this. On mine, I just use Meguiar's interior cleaner (whatever it's called) and a rag and wipe things down.

I'm tempted to get a damp rag with some water and dish soap or something and wipe this stuff down first. Then let it dry. Then use my usual method. Maybe no soap? Would that be ok? I'm just picturing my cleaning rag getting full of crumbs and other junk.


r/Detailing • • 16h ago

I Have A Question Is this worth trying to salvage?

Thumbnail
gallery
2 Upvotes

Came home after being away for 6 months to this. Is it worth trying to clean? Most of the surfaces are fabric and i’m worried no amount of surface cleaning will get rid of it all


r/Detailing • • 16h ago

I Have A Question Best microfiber for no static or linting

3 Upvotes

Which is better for no static or not linting the dang windows when cleaning windows. The rag company FTW or the tag company DRY ME A RIVER? Or? Oh yah! And also what window cleaner are you guys using that’s the best ??


r/Detailing • • 16h ago

I Need Help! (Time Sensitive) Detailing/maintaining real semi-aniline leather seats

1 Upvotes

Hey everyone,

I am working on a 2023 Nissan Rogue Platinum. I was just wondering what cleaner and conditioner do you use or recommend for detailing and maintaining real semi-aniline leather seats?

I’ve heard mixed reviews, so I just wanted to see what were your thoughts and experiences :)

P.S. the leather isn’t discolored, cracked or damaged.

Thanks in advance! Any tips are appreciated too :)


r/Detailing • • 19h ago

I Have A Question clear coat depth and paint correction

1 Upvotes

so maybe this is a dumb question, but how do you know how far you can go before you’re burning through the clear coat. Do you use a paint gage or what?

Thanks for the help


r/Detailing • • 19h ago

I Need Help! (Time Sensitive) Help with removing impact streak on white car

Post image
1 Upvotes

can someone give me advice on how to get this brown streak off my car after impact.
i just got this car after saving up for so long, i’m so heartbroken.
i’m barely covering my rent and car bill alone and now i have this on my plate. i’ve reached my breaking point
all advice will be taken into consideration greatly.


r/Detailing • • 21h ago

I Have A Question Can I use an HVLP spray gun to spray dye on a car carpet?

1 Upvotes

I'm looking at dying my Honda Beat's gray carpet. I have an HVLP spray gun. Rather than use a spray bottle, could I apply the dye with the spray gun to get it evenly applied before brushing it in?


r/Detailing • • 23h ago

Sharing Knowledge- I Learned This What's something you'll never stick to a dashboard again?

Post image
1 Upvotes

The Metal Car Mount on the right has a removable suction base, which sounds convenient. But "removable" and "you'll never know it was there" aren't necessarily the same thing.

Looking at this setup, I'm wondering what the dash will look like when everything comes off. I could live with cleaning up a little residue. A permanent shiny circle would bother me way more.

For the detailers and anyone who's taken old accessories out of a car, what left the worst mark? And what actually came off clean?


r/Detailing • • 1d ago

I Have A Question Is it just me, or does this grind your gears to see?

Post image
21 Upvotes

It's not my car, I don't even have to detail it, but just seeing this hurts! Why would you spend so much money on a vehicle and then allow your kids to destroy the paint?!?! 😭


r/Detailing • • 1d ago

I Have A Question Which GSM eagle edgeless for washing? And my infotainment/instrument cluster screen? 450 for it all?

Post image
4 Upvotes

I want to grab some eagle edgeless but not sure which GSM to grab. Mainly plan to switch to Gary dean method for washing my sedan, but I’m not sure if I should grab the 500gsm, 450, 600, etc?

It’s an Avalon with super soft paint that’s already swirled up and scratched, even after a paint correction/ceramic coat. So I’d want to be careful.

I’m upgrading from using a cyclone wash pad with 2 buckets (washboard and grit guard in my rinse bucket), 1 ultra safe sponge for rinseless, I have a few FTW towels for glass and such, and gauntlet drying towels.

Also which towel is best for cleaning dust and such from my infotainment screen and instrument cluster screen, and for my interior etc?

I’m open to other suggestions, thanks


r/Detailing • • 1d ago

I Have A Question For Black Car Fanboys: How do we maintain the shine year on year?

Post image
8 Upvotes

I have an Absolute Black Aug 2021 EcoSport AT.

I got one ceramic coat done one the car in 2023 to revive the shine and lustre. Now its been 3 yrs and I feel the coating has had its life.

What should I do next? Do another round of Ceramic coating ? Not interested to shell out lakhs on PPF etc-

How do you maintain the shine of your Black car?


r/Detailing • • 1d ago

I Have A Question Best way to "Just Married" decorate a car that is easily removable and safe?

0 Upvotes

I figured you guys are the ones to ask because you've probably had to fix enough of these that were done incorrectly.

I am a car nerd and, even though we are getting married at my home (and we would NEVER drive intoxicated), I'd like to park my Viper in front of the house with it decorated in the traditional "Just Married" fashion. It will also make for nice photos.

What's the best way to write on the windows that will come off easily enough? Also, figured I would attach the cans and string with blue painters tape to the rear bumper, since it doesn't need to hold for driving down the road, and will be parked on my property at all times

Thanks in advance