r/Diesel • • 23h ago

Maintenance prices are out of control

35 Upvotes

Had surgery and can’t do any service on the truck myself right now. Called around and for an oil, fuel, and trans filter change everyone wants $700+. This is on a 20+ year old LB7… Think I’ll just be waiting til I recover so I can do it myself. Holy smokes!


r/Diesel • • 18h ago

Purchase/Selling Advice Question on an '08 F350 6.4 6spd

Thumbnail
gallery
9 Upvotes

I've found a F350 XLT 4x4 extended cab with only 37k original miles and it's a 6spd. (Another plus for me bc I've only ever owned and drive manual vehicles) It does have a good amount of rust under the cab, but not bad at all on the frame.

I've been looking for something capable of pulling my 13,000lb RV for trips, but also something to possibly daily until I find another car, bc mine was recently in an accident.

Anyway I was about to "pull the trigger" and buy it, but then googled the reviews on it, and it says the '08 is one of the least reliable engines made by ford.

My question is: are they truly that bad? What's the biggest issue you guys have usually ran into with the 2008 6.4 engine?

This would be my first diesel owned truck. I've driven many diesels for work and pulled/hauled many different things, but they were always company trucks that I didnt own/maintain.

I've read that to make the '08 6.4's reliable they need to be bullet proofed and deleted.

What should I look out for, and when do these problems usually occur mile wise?

Should I just totally stay clear of this truck, and find something else? Or do you think I could get it to 100k+ miles before any big issues? Also how much does it usually run to bullet proof/delete them? Ik I could Google a lot of this & have, but also want some real genuine input from actual Super Duty owners/mechanics.

It's listed for a little under $20k, which seems like a pretty good deal comparing it to all the others out there, or what do you guys think?

Any and all info/tips are greatly appreciated.


r/Diesel • • 4h ago

Question/Need help! Is old diesel still usable?

Post image
7 Upvotes

I have a 1992ish Belarus tractor 250as that has just been sitting in the elements about 4-5 years. In anticipation of aged diesel added about a half bottle of Diesel Kleen to about 7 gallons. Old diesel is on left, fresh on right? Should I drain the tank or will adding new fuel work?


r/Diesel • • 16h ago

1996 7.3 Powerstroke randomly stalls while driving, then cranks but won’t start. Running out of ideas.

3 Upvotes

I’ve got a 1996 F350 7.3 Powerstroke with about 320k miles and I’ve been chasing this issue for weeks. I’m honestly running out of ideas and hoping someone here has dealt with something similar.
Basically the truck will start up and drive totally fine, then randomly start losing power and stumbling. Sometimes it’ll catch itself and keep running, other times it’ll just shut off completely. Sometimes it doesn’t even stumble, it just dies.
Once it dies, it’ll crank but won’t start. It cranks pretty strong initially, so it’s not like the batteries are completely dead. Sometimes if I let it sit for a while it’ll fire right back up and run fine until it happens again.
Here’s what I’ve done so far:
Replaced the CPS with a brand new Motorcraft sensor.
Replaced the entire main engine wiring harness.
Checked fuel pressure. Usually around 45–60 PSI while running and around 40–60 while cranking.
Checked ICP and IPR with FORScan and recorded the truck actually stumbling and dying.
ICP pressure didn’t suddenly drop before the truck stalled. IPR didn’t do anything crazy either.
Injector buzz test passed on all injectors.
Tried unplugging the ICP sensor and it didn’t solve the issue.
Checked wiring and connections visually and everything looks good.
I’ve also recorded several crank no start events with FORScan. On the most recent recording, CMP status showed OK throughout cranking, ICP was over 2,900 PSI, IPR was around 45–49%, and cranking RPM was around 140–165.
One thing I noticed is that battery voltage dropped to around 8.8V while cranking. I’ve also had some pretty low voltage readings on previous attempts, but what’s confusing is that the truck also stalls while driving with voltage around 13.7–13.9V.
What’s really confusing me is that I’ve caught the truck stumbling and dying on FORScan, and fuel pressure, ICP, and IPR don’t seem to point to an obvious problem.
I’m trying to avoid just throwing more parts at it. I’ve already spent a bunch of time and money on this thing.
Has anyone had a 7.3 do this where it’ll run fine, randomly stumble or die, refuse to restart, and then eventually start again after sitting?
Especially interested if anyone has dealt with something similar involving the IDM, PCM, or electrical system. I have FORScan logs from both the stalls and crank no start events if anyone wants to take a look.
Any help would be seriously appreciated.


r/Diesel • • 21h ago

SB cold intake rattle

2 Upvotes

Just started when I accelerated hear it at idle is the housing loose or filer loose. I don’t have tool bag to investigate.


r/Diesel • • 2h ago

is a audi 80 b3 NA diesel a good first car?

1 Upvotes

my friends uncle had an audi 80 b3 for 25 years before passing away and my friend is selling it for 6500PLN which is abt 1600USD, i know its in really good condition since the old man took really good care of it, and im thinking about buying it as my first car, is it a good choice?


r/Diesel • • 20h ago

HP4 failure

Thumbnail
1 Upvotes

r/Diesel • • 11h ago

How much 2005 60k 4x4

Post image
0 Upvotes

Curious about how much this truck would realistically sell for 2005 chevy 2500 4x4 63k miles 1 owner ext cab short bed perfect inside and out completely stock never tuned. What could I really expect to get out of it? I see some same trucks with higher miles listed for 30k and a few with about the same miles for 38-45k seems a little high for a 20 year old truck. What would you value it at


r/Diesel • • 12h ago

Winter upkeep before a power step slows down

0 Upvotes

Salt, frozen clay, and road spray can build up around a folded step long before anything looks broken. I can rinse the underside after a trip, but I am looking for the small routine that prevents a slow hinge without crawling under the truck after every storm. Clearing packed debris before it dries seems more useful than adding lubricant over grime.


r/Diesel • • 16h ago

How does towing change the clearance question for power steps?

0 Upvotes

Towing and heavy loads change how often a truck meets sloped driveways, curbs, and uneven fuel stops. On a diesel pickup, I would judge a motorized-step setup against those ordinary encounters instead of assuming one clearance figure settles the matter. The loaded-use context is what makes the choice meaningful.


r/Diesel • • 17h ago

When does lower entry outweigh upkeep on a diesel pickup?

0 Upvotes

A diesel pickup on gravel roads and winter highways asks more from moving exterior parts than a fair weather commuter. I would weigh the lower entry against the cleaning and inspection routine I am actually willing to follow after dirty drives. That practical commitment matters more than a blanket verdict on motorized steps.


r/Diesel • • 23h ago

5 reasons why I can't live without diesel

0 Upvotes
  • I don't need a gym My diesel pulls harder than my motivation to work out.
  • Petrolheads wake up dreaming about V8 sounds I wake up dreaming about a 300HP 1.9 TDI starting at 6 AM. That's real music.
  • My relationship status? Married to torque No cheating, just boosting.
  • I don't chase girls I chase turbo pressure, horsepower and that beautiful diesel sound.
  • Some people get butterflies in their stomach I get excited when the turbo starts spooling.