r/E30 • u/UnionTrain • 16h ago
Picture/Video I got the Hardtop installed
It drives so much better now, can’t wait to get out of the rain and into some dry roads
r/E30 • u/Probablythefirst • 1d ago
I recently put together the results from two surveys conducted in the r/E30 community, one back in September 2015 and another in January 2026. Across both surveys, there were a combined 331 responses, providing an interesting snapshot of E30 ownership and how the community has changed over the past 11 years.
Firstly, apologies for how long it's taken me to get around to posting the results of the latest survey! I've been meaning to put this together for a while now, but it's taken me a lot longer than I'd intended. It's also pretty crazy to think that it's now been over a decade since I conducted the original survey back in 2015. It honestly doesn't feel anywhere near that long ago!
The surveys covered a range of topics, including model years, body styles, engine variants, modifications, driving habits, ownership history and demographics. I thought it would be interesting to revisit the original results and compare them with the more recent survey to see what, if anything, has changed.
Here's a few things that stood out between the two sruveys:
One thing I found particularly interesting is just how consistent some of the results have been. Despite the 11-year gap between surveys, the 325i, coupe body style and Series 2 cars continue to dominate.
Of course, these results only reflect the people who participated in each survey and aren't necessarily representative of the wider E30 community. The two surveys also had different sample sizes and some differences in their questions, so comparisons should be taken with a grain of salt.
I've put together a series of graphs showing the results in more detail, including the full breakdown of model years, models, body styles, modifications and demographics.
Thanks again to everyone who took the time to participate, both back in 2015 and earlier this year. It's pretty cool that we're still here talking about these cars more than a decade later. I'd be interested to hear what everyone thinks of the results and whether anything surprises you!
r/E30 • u/protomor • Jul 27 '16
We have the same 3 topics every day and it's cluttering the sub. "What do you think of this E30" and "What do I look for in an E30" are the ones I'm going to start deleting (soon).
We do have an FAQ with the absolute basics. If that. So help us out by suggesting or even writing the content that goes into it.
r/E30 • u/UnionTrain • 16h ago
It drives so much better now, can’t wait to get out of the rain and into some dry roads
r/E30 • u/StotheJS3 • 1d ago
My completely rebuilt 1990 325is S54
r/E30 • u/_riv3rs_ • 15h ago
Bought a set of 15x7 et41 wheel (from x-drive car) with new continental tires for a steal. I own 91’ 318is with the stock 14x6.5 et30 wheels.
Can’t run wheels without spacers, and as the title implies, looking for some spacers, either bolt on or just extended lugs. Trying to get a more aggressive stance when I lower the car and was thinking 20mm spacer for the from and 25mm spacer for the rear.
Won’t be doing much with the car in regards spirited driving as the car is undergoing maintenance/repair and refurbishment. This would basically be just to test out how things are coming along.
Thoughts and opinions are greatly appreciated. Thanks
r/E30 • u/figgyMOTO65 • 1d ago
I hope this helps many of you since we all have the same issue. Dry rotted connectors. So my wheel speed sensor connectors were white in 1986. Now they are piss yellow and falling apart. I wanted to keep the OEM look but finding better connectors was pricey UNTIL. I did some research and found Mercedes dislikes BMW so much that they reversed their plugs. So BMW main wiring harness is a female and sensor is a male. Mercedes is backwards. So I purchased theirs and cut that bad boy up. Connected to my BMW and bam!!!!!! Happy boy.
r/E30 • u/Plenty_Jeweler_8975 • 15h ago
Hey E30heads, long time lurker here. My 1990 325i has been my daily driver for about 6 years now, and I fear the automatic gearbox has finally bit the dust. Money is tight right now (isn't it always?) and the most sensible solution for me is to swap with a used transmission with fewer miles. (For those who will inevitably suggest a manual swap I say: Someday...)
Curious if anyone has a used ZF 4HP-22 they'd be interested in selling me. I'm located in LA and local pick-a-part lots have been a bust. I've found some decent transplant candidates on ebay, but if I could avoid those shipping costs, I'd be a happy guy.
Hoping for a stroke of luck here, as people seem to wanna ditch their auto boxes ASAP. Thanks for reading and thanks for posting! This subreddit has helped me through many a home-repair.
r/E30 • u/Appropriate-Buy-7231 • 1d ago
I always loved the classic wooden steering wheel look on Euro sporty sedans and coupes. I finally pulled the trigger on the Monte Carlo. What are your thoughts?
r/E30 • u/chninimugen • 1d ago
Looking at the vin it seems odd, but also curious what the 14 digit number is below and what it represents. Any help is greatly appreciated. Let me know if more info is needed.
r/E30 • u/Few_Affect_4938 • 1d ago
I have a 1991 318is. Over the last few weeks, the battery has been draining if it sits for more than a few hours. However, if I turn it off and back on, it always starts right up.
I've replaced the battery and am about to replace the alternator, but I wanted to ask if there’s something else I should check first. If it were the alternator, I would have expected that the battery would still hold whatever charge it had.
r/E30 • u/Heavy-Volume-9161 • 1d ago
Title says it all. I know there is a ton of red stuff on there, I went back in to try and gum it up and stop the rattle (didnt work). I know its a floating caliper but rattling like crazy. Everything is tight, replaced anti-rattle springs and caliper pin bushings. Other three calipers are ok, rear right one will not stop rattling. Suggestions? Replace?
r/E30 • u/WTHRYS__ • 2d ago
Seller is asking $19.5k. 1990 325is. Car is clean otherwise. Motor was rebuilt 5k miles ago by a reputable shop in the area. Seller was upfront about the surface rust, I'm just not sure how safe this is.
r/E30 • u/Itsnotjesus86 • 1d ago
I want to stroker my 86 eta I have a parts car a 87 IS I have the head, intake, wiring harness, 173 ECU and the majority of the components to make it happen as is my main concern is mainly the compression issue running eta pistons with 885 heads make for horrible compression numbers, super eta pistons are an option or taking I pistons and shaving the skirts to make them clear the eta crank or the more expensive route which is buying custom pistons and if going down that route how should I spec them?
r/E30 • u/_runningwater__ • 2d ago
r/E30 • u/henry_hyshiter • 2d ago
Hi all,
Currently rebuilding an M42 with light performance upgrades (cammed and tuned). Finished the rotating assembly assemblage and went to measure crank endplay and it is quite excessive. It measure 0.19in with a dial gauge at the crank nose and 0.18 at the thrust bearing surface with feeler gauges. Normal tolerance is 0.003-0.006in so way way out of range. Pulled the main cap to check the crank and the thrust surface is very clearly worn and I can feel a groove all the way around. All bearing clearances were within spec and this is the only issue I’ve found. I know my options are being the crank to be welded and turned, or find a new crank. Finding a new crank is probably more viable, but finding an M42 crank seems a bit more challenging and more expensive than an m44. I know the stroke is 2.5mm longer than the M42 so it will require some piston crown work, but that seems most viable to me. Would love some other input on this issue and what direction to go. If anyone has a spare M42 or M44 crank, and ideally is near the Chicago land area, let me know!
r/E30 • u/x03yffehcx • 2d ago
just what the title says….
i’m looking for one. if anyone has one for sale please contact me.
thanks.
i daily drive for the last 26 years a 1990 glacier blue sedan 5 sp 367k on the working odo.
thanks all
cheffy30
r/E30 • u/DenaM314 • 2d ago
I’m looking to buy my first E30 and would appreciate some input from people who have owned these cars for a while.
I’ve come across a 1990 325i coupe with an automatic transmission that appears to be very well cared for. Assuming the car checks out mechanically and structurally, the asking price is in the $8–9k range.
My dilemma is whether it’s worth buying a really nice automatic example at that price or holding out for a comparable car with a factory manual transmission.
E30 prices seem to have gotten pretty out of hand, and I’m trying to be realistic about what I’m getting for my money. I don’t necessarily want to rush into buying the wrong car just because a nice example happens to be available.
I know the general advice is to buy the best-condition car you can find, but I’m curious where the transmission fits into that equation.
Would you buy the clean automatic and enjoy it, or be patient and wait for the right manual car?
I am not in a rush but I am actively looking across the U.S. for one. My max is around 10k
Appreciate any advice!
r/E30 • u/Icy_Recognition5031 • 3d ago
this sub has only seen the build at night so heres some during the day, loved brg on the e36 growing up so i put it on the e30
missing front valence i know lol
r/E30 • u/Antique_Change_3015 • 2d ago
It was right next to my battery under the hood….is this supposed to be there or did it possibly fall down there from somewhere else?
r/E30 • u/Antique_Change_3015 • 2d ago
So....I have some real minor surface rust in my battery tray like pretty much most of us (it's a convertible). I have the battery mounted under the hood (I think all convertibles do).
Was battery rust a result of older batteries (like that were probably back from the 80s and 90s) that would spill acid or ? Or was it a result of the fumes, etc?
My car has a Deka maintenance-free battery installed now.....Deka batteries are supposedly really good. It's not sealed but rather a flooded battery.
Just to confirm.....I do NOT need to vent a battery mounted under the hood, correct? This is just for those who have them mounted in the trunk?
I plan on fixing the surface rust in the tray before next spring.....so will I not need to worry about that anymore with a maintenance free battery or ?