r/EngineeringPorn • • 1d ago

View from the tower. The speed is still rather fast

9.6k Upvotes

r/EngineeringPorn • • 5h ago

Spring-loaded bistable hinge

41 Upvotes

r/EngineeringPorn • • 9h ago

Winding a clock mainspring using a specialized winder

60 Upvotes

r/EngineeringPorn • • 12h ago

Eiffel Tower, from the summit to the steam pumps underground

21 Upvotes

I built a Three.js cutaway of the Eiffel Tower, The tricky part was scale. I wanted you to see the whole 300 m tower, then get close enough to watch a single piston move.

I built this with GPT 6.2 Astra, using historical drawings of the 1889 lifts as references. Try opening the lift valve in the pressure-map view. You can watch the water flow change and see how the lift car responds.

https://www.meptasarim.com/eyfel-yeralti-pompa-dairesi-simulator.html


r/EngineeringPorn • • 6h ago

Been developing a 3D Blaster Builder. Packed a lot of cool features!

3 Upvotes

r/EngineeringPorn • • 1d ago

Semiconductor Probe cards

Thumbnail gallery
231 Upvotes

r/EngineeringPorn • • 1d ago

Knolled layout of a 1980s Sony Microcassette Recorder (M-88V), featuring its miniaturized belt drive and brass capstan flywheel [OC]

Thumbnail
gallery
85 Upvotes

r/EngineeringPorn • • 2d ago

Missing tile on STS-27 vs Starship Flight 15

Post image
988 Upvotes

r/EngineeringPorn • • 1d ago

Three SO-101 robot arms move one ball through tracks, a cup and salt using replay, vision and learned control [OC]

38 Upvotes

A lap through Almost Alive, an installation we built around three different control methods. The clip uses camera cuts and includes a mistake.

Echo replays recorded poses to tip the rocking track. Iris detects the orange ball in its cup, then replays the transfer motion and signals Echo. Bandit retrieves the ball from salt, where the pickup position varies, using a policy learned from demonstrations.

We collected 115 leader-arm demonstrations and trained ACT and diffusion models with LeRobot. Two camera images and the arm's position are inputs; a sequence of movements is the output. The learned pickup is slow and imperfect.

Original film and discussion: https://x.com/pbshgthm/status/2122679067065598015

Credits: SO-101 design by TheRobotStudio; hardware from Seeed Studio; learning software from Hugging Face LeRobot; track models by Tabu Design.


r/EngineeringPorn • • 1d ago

How Liebherr PR 776 Bulldozer Tracks Are Installed | Inside the Austrian Factory

Thumbnail
youtube.com
45 Upvotes

r/EngineeringPorn • • 2d ago

On board video from the S42 ship catch.

944 Upvotes

r/EngineeringPorn • • 3d ago

What one missing little heat shield tile looks like

Post image
3.2k Upvotes

r/EngineeringPorn • • 1d ago

Hydrostatic proof test on one of our power module components, run to 3,600 psi

Thumbnail
gallery
4 Upvotes

We’re an engineering team in El Segundo building 5 MW power modules around a supercritical CO₂ power block. Every pressure-containing component is proof tested before it goes into the module.

This one got a hydrostatic test. We filled it with water and stepped the pressure up in stages, holding at each level to watch the gauge for pressure decay and inspect the part for leaks. It ran all the way to 3,600 psi.

We use water because it’s nearly incompressible and stores very little energy under pressure, which makes a failure much safer to find on the test stand.

Happy to answer questions, ones we can!


r/EngineeringPorn • • 21h ago

Tesla unveils 7.4 MW solid-state power platform with claimed peak efficiency of 98.86%

0 Upvotes

Tesla’s new Powercore platform combines a transformer, inverter and solid-state circuit breaker inside a single medium-voltage unit for data centers, solar farms and battery-storage projects.

The company claims the system can continuously deliver 7.4 MW, achieve peak efficiency of 98.86% and clear electrical faults up to 1,000 times faster than conventional breakers. It supports medium-voltage AC inputs and DC outputs ranging from 800 to 2,000 volts.

Powercore could connect the grid directly to future 800-volt DC data centers while removing intermediate conversion stages. Tesla plans to manufacture it in the United States, with its first units expected to enter service in 2027.

Could integrated solid-state platforms become the standard power architecture for high-density AI data centers?


r/EngineeringPorn • • 3d ago

How much difference a year can make

Post image
857 Upvotes

r/EngineeringPorn • • 3d ago

Electric plane for 19 passangers, 500km developed in China. I saw SpaceX 20 times today but not this incredible achivement

1.3k Upvotes

r/EngineeringPorn • • 3d ago

split flap digit driven by one stepper and a reed switch

67 Upvotes

r/EngineeringPorn • • 4d ago

Starship 42 after catch on flight 15

1.7k Upvotes

Currently being inspected before it's lowered and moved


r/EngineeringPorn • • 4d ago

MECHAZiLLA CAUGHT STARSHlP FOR THE FIRST TIME

827 Upvotes

r/EngineeringPorn • • 4d ago

animation of a prototype cars front suspension

340 Upvotes

The suspension is in its layout very simmilar to what late 90s to early 2000s f1 cars used. In modern f1 the suspension still functions the same way but the layout is usually quite a bit different. This layout is still used in modern protoype cars for example in LMH/LMDh.

I used the CAD platform Onshape to create and animate this suspension.


r/EngineeringPorn • • 3d ago

Robotic Container Cranes

Post image
2 Upvotes

Science Robotics: "Autane: An autonomous crane for sustained port operations," by Yang et. al.

"Fully automated cranes are revolutionizing modern port operations by addressing labor shortages, improving precision, + enhancing safety." Toward this goal, [the researchers] present the Autane (autonomous crane) system specifically developed for rubber tire gantry (RTG) cranes handling standardized containers in port yards, enabling autonomous safety-critical container grabbing, transport, and placement with high accuracy, adaptability, + efficiency. 

"Autane overcomes the challenges of safe motion of large-scale cranes with centimeter-level precision requirements, providing long-distance high-precision perception." It uses multisensor fusion, real-time obstacle detection, + simultaneous localization + mapping to perceive the environment, identify container features, + dynamically adjust trajectories. 

"By tightly coupling perception, planning, control, + operation + maintenance, Autane achieves safe + precise alignment, seamless interaction with transport vehicles, + robust execution of long-distance handling tasks." Deployed in multiple ports, Autane shows round-the-clock operation + has autonomously handled more than 2 million 20-foot equivalent units [shipping containers].

"This work highlights the potential of fully autonomous RTG cranes to enable sustained, resilient, + low-intervention port automation." 

This article highlights issues of automation, robotics, labor displacement, continuous performance, + the "electrostate" we urgently need to fight climate change.


r/EngineeringPorn • • 4d ago

How the NEW 2027 Volkswagen ID. Tiguan Is Made | Inside the Emden Factory

Thumbnail
youtu.be
10 Upvotes

r/EngineeringPorn • • 6d ago

The insides of an escalator running with steps missing.

971 Upvotes

r/EngineeringPorn • • 4d ago

Building a metro line

Post image
0 Upvotes

Montreal, QC. 62 years ago, November 7, 1964, the day they stopped the St. Lawrence river from flowing through the Le Moyne channel. They did this to build the metro line between Île Sainte-Hélène and Longueuil metro stations.
The bottom photo is how it looks today, taken from Google Earth. Superimposed is where the metro line is today. The corresponding points in both photos are matched to within a few feet.