r/ErgoMechKeyboards • u/EmilianoTechs • 6h ago
r/ErgoMechKeyboards • u/PotOddsTrading • 7h ago
[news] Keychron Orca Echo Kickstarter $158 Early Bird, $170 w/case
kickstarter.comI went with the case bundle. Plus added a trackball and keycaps. Total was $196. 19mm Trackball was $8. Apex POM low profile Switches was $16. They have Red, Brown, Banana.
r/ErgoMechKeyboards • u/uqzp • 8h ago
[photo] Portable gaming & coding setup with an Eyelash Corne + AR glasses
Bought my Eyelash Corne about 5 months ago with KLP Lamé keycaps and Outemu half-height red switches for just under $100. I've been using it both at home and on the go for programming and gaming. It was quite a jump from a 100% keyboard, but I got used to it quickly.
I use QWERTY with urob's HRMs to lessen the strain on my thumbs, since the Corne's outermost and middle thumb keys sit a bit too far under the palm for me. For gaming, I toggle off HRMs and use "JKL," as "WASD" (it's the left hand equivalent to "ASDX"), and I use the 5-way joystick for numbers 1-5. I do miss 6-0 and the joystick isn't that comfortable, so I'll probably add combos or another layer for the numbers.
The rest of the setup is just the ROG Ally plugged into my RayNeo Air 4 Pro glasses through the USB-C splitter (with the power bank on the other port), and the Corne + mouse over Bluetooth.
I'm looking to hand-wire a curved keyboard for home next. I've considered the Skeletyl, Cygnus, and TBK Mini. What's the difference between them in feel/thumb placement, and which one is best in your opinion?
Items in picture:
- 3x6 Eyelash Corne with OLED screens, 5-way joystick and a rotary knob
- ROG Ally Z1E
- Original ROG Ally charger
- GeekShare ROG Ally carrying case
- Baseus 240W USB-C to USB-C cable
- Hagibis USB-C splitter
- RayNeo Air 4 Pro AR glasses + case + cable
- Darmoshark M3 V2 mouse
- Ugreen Nexode 145W 25,000mAh power bank
r/ErgoMechKeyboards • u/elevatorrrot • 14h ago
[video] new keyboard: the btrfld, a foldable, low profile, tenting keyboard
r/ErgoMechKeyboards • u/alexthehut • 8h ago
[help] Sofle eRGB -mx v1 - each side works plugged into USB-C separately, can't connect by TRRS (RP2040 mcu)
Searching for an answer for several days and can't figure it out, so figured i'd make the 1,000th sofle noob post. I'm guessing its something soldered the wrong way, but unsure. Got the firmware from the pandakb link to github. When plugged in separately they do show up as 2 sofle keyboards in the windows device / bluetooth display.
I guess i could just forever run them plugged in by USB-C... thanks in advance.
r/ErgoMechKeyboards • u/IohannesPetrvs • 4h ago
[help] Sofle RGB vs Sofle Pico
I am decided to buy a Sofle keyboard, since it has every feature I want.
The issue is: I don't know if I should choose the RGB version or the Pico version. While the Pico seems to be a upgrade in some areas (including the controller) the RGB is way more widespread from what I could see. I don't really want to 3D print lots of cases, just one is more than enough.
https://www.soflepico.com/ (Sofle Pico site)
https://josefadamcik.github.io/SofleKeyboard/ (Sofle Keyboard site with all official variants, including Pico and RGB).
r/ErgoMechKeyboards • u/ChristophCullmann • 4h ago
[help] ALPS plate for Ferris Sweep High?
I have some sweep high PCBs that support ALPS but I fail to find any STL for it to print a matching plate.
Has somebody a pointer to such an thing? Without a plate both switch alignment and stability is bit hard to achieve.
r/ErgoMechKeyboards • u/secersh • 1d ago
[photo] etzee ❤️ (almost) a complete render of the left half
r/ErgoMechKeyboards • u/wherahiko • 16h ago
[help] Thumb pain after switching to split ergo
I switched to ergo keyboards earlier this year, but have started experiencing thumb pain a few months in. I'd never experienced pain on normal ANSI boards, and I'm hoping to find a way to solve this so I can carry on using ergo boards.
I started on Miryoku, then switched to Selenium, and the pain started shortly after that. (I'm not sure if it was because of Selenium's thumb use, or because I hadn't really got up to speed on Miryoku before that, or if it just took time for the repetitive strain to feel painful.)
For now, I've switched back to a split ANSI board while trying to solve this, but I'd really like to find a way to make it work. I really liked the layers in Selenium, and the feel and portability of typing on 36 keys.
Some possibilities:
- I wonder if it's a case of 'too much, too soon", of poor technique, or if it's possible that my thumbs are anatomically unsuitable for such thumb use (I hope it's not the latter!)
- I thought it might be caused by reaching for the "tuck" keys on the Atreus (in 36-key mode; I left the others unassigned), and so I switched to a Cheapino. The problem went away for a week (likely due to the new board slowing me down), only to return just the same.
- it could be that reaching stretching between the thumb shift (on the left-hand 'tuck' key) and the "I" key on my Dvorak (Qwerty "G" location) was the one bad stretch that caused this. But I've since set up a text replacement to turn "I" into "I" each time and the pain hasn't gone away yet.
Has anyone here experienced this pain - and managed to solve it without abandoning small keyboards? I would like to hear your experiences.
I'm aware this thumb issue has been written about elsewhere, e.g. by Pascal Getreuer: https://getreuer.info/posts/keyboards/thumb-ergo/index.html. Yet, at the same time, clearly lots of others do enjoy typing on these small boards without pain ... so I'm hoping there's a way to make it work.
I've even thought of going to a larger 3x6 board, and putting Shift, Backspace, Tab, Enter, and the symbol layer key on the outer pinky columns, so the thumb only has to do Space. Or putting some of those functions on combos. I've also considered Anymak as an alternative to Selenium, but having learnt Selenium to fluency, I'm reluctant to start the learning process again. (I'm not a programmer and have minimal ability to change layouts in QMK myself, hence sticking with stock options so far.)
Thank you in advance for your comments!
r/ErgoMechKeyboards • u/bakerbrandond • 1d ago
[video] Wireless Corne + Prospector dongle with a clock, charging indicators and typing-driven snow
This is my wireless 36-key Corne with nice!view halves and a Prospector display dongle as the central, on ZMK v0.3. Everything is open source: the config is at https://github.com/bakerbrandond/zmk-config and the dongle runs my fork of the Prospector module at https://github.com/bakerbrandond/prospector-zmk-module.
(In the video I forgot to plug the dongle into my Linux computer, so the clock isn't showing, and I forgot to plug in a half, so you don't see the charging bolt either. Both are described below.)
**The dongle**
- **Nord colour theme**, with the active-layer roller, a WPM graph and a battery bar for each half. The bars are green from 70%, yellow from 30% and red below that.
- **Charging bolt.** The halves report over Bluetooth when they're on USB power, and the dongle shows a yellow ⚡ in place of that half's battery percentage, so a charging half no longer just reads 100.
- **Clock above the layer name.** The computer sends the time over Raw HID, over USB or Bluetooth. On Linux it's a small Python script run by a systemd user service. Windows and macOS can use qmk-hid-host, but I haven't tested those. The clock is 24-hour by default with a 12-hour option, and it hides itself if nothing has sent the time for a few minutes.
- **Status indicators** in Nord aurora colours: ZMK Studio unlocked, mouse jiggler on, USB output and Bluetooth output with the profile number.
- **Matrix-rain screensaver** after 2 minutes idle, and a brightness key.
- **Zappy Birds**, a flappy-bird game you play on the dongle with the keyboard. Every key flaps. In hard mode, only the letter shown on screen flaps. Best scores are saved.
- **ZMK Studio** over the dongle's USB, and a **mouse jiggler**.
**The halves**
- The nice!views show ZMK's night mountain scene stretched over the full screen, with light snow falling all the time.
- Each key press drops a flake above its column, and typing faster makes the snow heavier and the flakes bigger.
- Flakes pile into a drift at the bottom that melts back 5 s after you stop. The animation stops when the keyboard goes idle, to save battery.
- The stock battery and connection icons are hidden because the dongle already shows them. There's a config option to bring them back as Nerd Font icons if you run the halves without a dongle.
The README covers building it, and setting it up without a Prospector. Happy to answer questions.
r/ErgoMechKeyboards • u/ichik • 1d ago
[photo] CannonKeys Link Split Ergo
- Link Split Ergo with PC plate and plate foam (I'm going to add the case and PCB foams once the replacement arrives), flashed with VIAL
- KTT Matcha switches (a bit too scratchy and too light for my taste, but the board is going to be mainly a showcase build)
- PBTFans Mischief keycaps (designed by Afresh)
- Teevolution Terra Pro mouse with RapidSync 8k dongle
- X-Raypad Aqua Control Plus custom deskmat (art by Xingye Jin)
- Palm rests from Ergokeeb (wooden platform on the left replaced by a MiFuny one because the wood on the original started cracking)
- Giuhds Z-Flex tripod heads for tenting
- LANO coiled cable and weight rod, GX16 5 pin
- Noname paracord cable from for interconnect
r/ErgoMechKeyboards • u/languageservicesco • 10h ago
[help] Periboard-835 II
Has anyone got this keyboard? What I am interested in is how the keys are designed to allow the symbols to be illuminated. I have previously had Logitech K350s. From a general use perspective, they have been great, but the symbols always wear out quicker than I would like. My sons have SteelSeries keyboards, and they have keys where the symbol is simply a clear area where the light can shine through and they are having no issues with wear. Does anyone know what the Periboard keys are like?
r/ErgoMechKeyboards • u/No-Try607 • 14h ago
[buying advice] Looking for ergonomic keyboard to add to my collection and continue to help left wrist issues
I’ve been thinking about getting another ergonomic keyboard to help with my wrist pain. I’ve looked at quite a few options, but the two I’ve been most interested in are the Charybdis MK2 and Glove80. I’m definitely open to other suggestions though!
I currently use a Kinesis Advantage 360 Pro, which has helped a lot with my wrist pain. I also switch between it and a Go60, since I’ve found that occasionally switching keyboards helps when my wrist starts bothering me again.
I’m particularly interested in the Charybdis MK2 because of its integrated trackball. I’ve never used a trackball before, but the idea of being able to control my mouse without moving my hand away from the keyboard seems really nice. My Go60 actually has a built-in trackpad, but I rarely use it because I haven’t found it to work particularly well. I’m curious how a trackball compares to both a trackpad and a traditional mouse, especially in terms of comfort and everyday usability.
The Glove80 also looks like a great option, especially since I’m already used to concave keywells with my Kinesis.
I spend a lot of time programming, using Neovim, and generally being at my computer, so comfort and ergonomics are my biggest priorities.
I’m curious how these keyboards compare in terms of comfort, particularly their keywells and thumb clusters. I’d also love to hear from anyone who’s switched from a traditional mouse to a trackball. Is it something you prefer once you get used to it, or do you still find yourself reaching for a regular mouse?
I’m also open to recommendations for other ergonomic keyboards, preferably prebuilt ones.
I’d appreciate hearing anyone’s experiences, especially from people who’ve dealt with wrist pain. Thanks!
!
r/ErgoMechKeyboards • u/Beneficial-Alarm-146 • 1d ago
[photo] I was looking forward to this 😢 no keychron orca echo in EU
r/ErgoMechKeyboards • u/SoundOfMusso • 17h ago
[discussion] Corne 4.1: Any 3d printed case recommendations?
Hey guys, I'm currently using a corne 4.1. I'm planning on making it a 5 column and installing rotary encoders.
Issue is, I haven't found much STL files for a 5 column 4.1. The only one I could find is on their github, and it doesn't seem to have a plate for securing the PCB?
If you guys could give me some recommendations, specifically tented ones, I'd really appreciate it!
r/ErgoMechKeyboards • u/Regular_Low8792 • 14h ago
[discussion] Good Kanata layouts?
I am looking to learn to type more comfortably on a standard keyboard again as I want to work on game dev, but feel more comfortable playing on a normal keyboard, and switching back and forth between a split and normal is a bit annoying at the moment.
But of course like everyone in this sub, I hate typing on a normal keyboard. The main letters are no so back, but it's everything else, the numbers and symbols.
So I am trying to work on a Kanata layout, but I am just not as good as others at designing layouts, and catching where the issues of flow might be.
I am super curious if anyone else here has a layout they can share so I can get some ideas and maybe try it out. But I will share my first prototype layout, which was adopted from some ideas I was messing around with on my Ferris Sweep (another keyboard I need to experiment with other peoples layouts on)
The ideas behind my layout
- No home row mod/hold modifiers
- Layer toggles and extra characters will be done with combos
- All keys within 1 space of home row (maybe with the exception of shifting, tab, and enter. Couldn't settle on this, this version has combos for tab and enter)
(defcfg
process-unmapped-keys yes
concurrent-tap-hold yes
)
(defsrc
grv 1 2 3 4 5 6 7 8 9 0 - = bspc
tab q w e r t y u i o p \[ \] \\
caps a s d f g h j k l ; ' ret
lsft z x c v b n m , . / rsft
lctl lmet lalt spc ralt rctl menu
)
(deflayer Vanilla
grv 1 2 3 4 5 6 7 8 9 0 - = bspc
tab q w e r t y u i o p \[ \] \\
caps a s d f g h j k l ; ' ret
lsft z x c v b n m , . / rsft
lctl lmet lalt spc ralt rctl XX
)
(deflayer Type
grv 1 2 3 4 5 6 7 8 9 0 - = bspc
tab q w e r t y u i o p \[ \] \\
caps a s d f g h j k l ; ' ret
lsft z x c v b n m , . / rsft
lctl lmet lalt spc ralt rctl XX
)
(deflayer Num
grv 1 2 3 4 5 6 7 8 9 0 - = bspc
tab q w e r t y 4 5 6 p \[ \] \\
caps a s d f g h 1 2 3 0 ' ret
lsft z x c v b n 7 8 9 / rsft
lctl lmet lalt spc ralt rctl XX
)
(deflayer Sym
grv 1 2 3 4 5 6 7 8 9 0 - = bspc
tab S-4 S-3 S-- / t y u i o p \[ \] \\
caps S-8 - S-= = S-1 h j k l ; ' ret
lsft z S-7 S-6 S-5 b n m , . / rsft
lctl lmet lalt spc ralt rctl XX
)
(deflayer Nav
grv 1 2 3 4 5 6 7 8 9 0 - = bspc
tab q w e r t y home up end p \[ \] \\
caps a s d f g h left down right ; ' ret
lsft z x c v b n m , . / rsft
lctl lmet lalt spc ralt rctl XX
)
(deflayer Mouse
grv 1 2 3 4 5 6 7 8 9 0 - = bspc
tab q w e r t y mltp (movemouse-up 10 10) mrtp p \[ \] \\
caps a s d f g h (movemouse-left 10 10) (movemouse-down 10 10) (movemouse-right 10 10) ; ' ret
lsft z x c v b n m , . / rsft
lctl lmet lalt spc ralt rctl XX
)
(defchordsv2
(9 0) (switch ((layer Vanilla)) (layer-switch Type) break () (layer-switch Vanilla) break) 30 all-released ()
(j k) (layer-while-held Sym) 30 first-release (Vanilla)
(d f) (layer-while-held Num) 30 first-release (Vanilla)
(s d) (layer-while-held Nav) 30 first-release (Vanilla)
(s d f) (layer-while-held Mouse) 30 first-release (Vanilla)
(i o) enter 30 first-release (Vanilla)
(w e) tab 30 first-release (Vanilla)
(k l) bspc 30 first-release (Vanilla)
(s f) S-9 30 first-release (Vanilla)
(j l) S-0 30 first-release (Vanilla)
(w r) \[ 30 first-release (Vanilla)
(u o) \] 30 first-release (Vanilla)
(x v) S-\[ 30 first-release (Vanilla)
(m .) S-\] 30 first-release (Vanilla)
)
r/ErgoMechKeyboards • u/superpg019 • 22h ago
[help] Looking for Choc keycaps with interesting designs for my first Corne
Hi everyone!
I’m about to build my first keyboard, a Corne with Choc switches, and I’m having a hard time finding keycaps I actually like.
Every time I search for Choc keycaps I end up with one of these two options:
- Blank keycaps with no legends at all
- Basic keycaps with just the standard letters
What I’m looking for is something with a bit more personality: custom designs, themed sets, interesting colorways or creative legends. Something along the lines of this set from Yuzu Keycaps:
- PFF Terminal: https://yuzukeycaps.com/keycap-sets/pff/terminal
Do you know any other shops, group buys or designers making Choc keycaps with this kind of style? Any recommendations are welcome, thanks in advance!
r/ErgoMechKeyboards • u/Keepy-Uppy-1001 • 2d ago
[photo] iOra — a curved ortholinear 40% split keyboard with two trackballs
I designed and built my ideal split keyboard.
Specs
- Curved ortholinear layout, 40%
- 19mm trackball on each half, so you can control the cursor with either hand
- Seeed XIAO nRF52840 Plus, fully wireless (ZMK)
- Powered by AA batteries
- Switches: Kailh Deep Sea Silent Mini Pink
- Keycaps: LAK mini - ice keycaps -
- 3D-printed case
Design concept
I arranged the keys in a curved layout to follow the natural movement of my hands while typing.
The 17mm key spacing is narrower than the standard 19mm spacing, reducing the amount of finger movement needed for typing.
The trackballs on both halves can be used for cursor control or configured to send key inputs, making them versatile for a wide range of uses.
r/ErgoMechKeyboards • u/ergomechstore • 2d ago
[vendor] [Ad] Black November - upto 20% discount on your Aluminium split Ergonomic
The end of the year is drawing near, it's time for us to prepare for the holiday season. If you're planning to get a keyboard as a gift for your loved one, this is the best time for it.
To better prepare for this sale event, lead-time for these following items are updated so you can get a better sense of the arrival time for your item.
- All sandwich keyboards can be dispatched in less than 7 days. Total shipping time is about 10-12 days.
- The Totem, Zenith, Totemist also can be dispatched in less than 10 days.
- The Neodox gasket mount can be dispatched within 1 week.
- Sofle Hybrid, Sofle V2 aluminum case: 10 days.
- All order with extra items (switches, keycaps): 14 days.
Now to the best part - The discount:
- Anvil, Zenith, Totemist, : 20% off
- Sofle hybrid (Aluminum edition), Sofle Hybrid sandwich : 20% off
- Neodox Aluminum : 20% off
- The rest of the items: 15% off
All priced are either calculated at checkout or displayed as discounted price.
Hurry up before time runs out.
r/ErgoMechKeyboards • u/SortelOne1 • 2d ago
[guide] A site for learning new keymappings :D
Hey everyone! I just recently finished a project that I wanted to share, hopefully it'll help people learn their keymappings a bit easier.
About a year go I built a TOTEM split keyboard and just never forced myself to get over the hump of actually learning the binds. But recently I decided that I wanted to give it another go, and to make it easier I built a website called ZMK Trainer! (It's not just for ZMK keyboards, it also supports QMK, Vial, etc). You can either connect your keyboard like you would through ZMK studio, upload a config file, give it the URL of a public GitHub with a config file in it, etc.
It's literally just a typing test that shows your your keymapping below it lol, but it also shows you all of your layers, HRM keys, etc, and how to get to the key you're trying to type. There are different options to change the characters that show up on the test as well, and their frequency so you can focus on keys causing you issues.

It's free for anyone who wants to use it! And if you find any bugs please let me know, I'm still trying to iron out a couple final things but wanted to share it with y'all :) And also I'm happy to take suggestions for new features as well! I'd like to make this as useful as possible.
r/ErgoMechKeyboards • u/henrique_2m • 2d ago
[photo] Z-MapFlow: an open-source desktop app to edit, build and flash ZMK firmware
Hey everyone! I’m building Z-MapFlow, an open-source desktop app that brings ZMK keymap editing, firmware builds and flashing into one interface.
You can drag and drop keys to edit your layout, configure layers, combos, macros and behaviors, then build locally with Docker and flash through a guided interface. No switching between an editor, GitHub Actions and manual firmware copying.
Docker needs to be installed and running, and you’ll need to put your keyboard into bootloader mode when prompted.
The project is still early, but the edit → build → flash workflow is already functional—I’m using it with my own keyboard. Currently available for Linux, with Sofle v2 support. Windows and macOS are next on the roadmap.
I’d love for people to try it and share feedback or bug reports. Contributions, including support for more keyboards, are welcome!
Source and downloads: https://github.com/Henriquex25/Z-MapFlow
Documentation: https://henriquex25.github.io/Z-MapFlow/
r/ErgoMechKeyboards • u/nomotta • 3d ago
[photo] Keychron Orca Echo
I got my hands on a pre-release review unit of the Orca Echo from Keychron!
It’s a fully loaded split ergonomic keyboard featuring a trackball on the right side, a rotary encoder on the left, and touchpads on the inner sides of both halves.
And of course, it supports tenting!
There are still quite a few things that could be improved in terms of firmware and hardware design, but I think there’s something significant about a well-known company like Keychron releasing a split keyboard with a built-in trackball.
I hope other manufacturers will also come out with their own split keyboards, each bringing their own unique ideas and design philosophy to the table.
By the way, I’ve also uploaded a review video of this keyboard, so feel free to check it out if you’re interested!
【先行レビュー】割れてるキーボートって便利?
https://youtu.be/CpFQrj5HzJU
Also, would you prefer English voice-over in my videos?
I’m thinking about using AI for the voice-over. If subtitles are enough, I can just add English subtitles. But if you’d like an English dub, I’ll give it a shot!
Let me know what you think in the comments!
r/ErgoMechKeyboards • u/Whitehatnetizen • 2d ago
[photo] New Keycap Day!
Just got my new keycaps from Yuzu. Been into mechanical keyboards for about 16 years, finally dropped down to a 40% keyboard in September this year with a Corne. Then I really wanted a set of custom keycaps to go with it so I stumbled on Yuzu. then I tried some Lamé keycaps and realised I had to build something with those in mind. my initial thought was that the lamé caps formed a riverbed. so clearly we needed some fish.


Then I realised that I have the keyboards tented, so clearly it needed to represent some kind of mountain.


The quality is fantastic, the fit of the keycaps on my keys are extremely good and consistent.
So I'm really happy! Today is a good Monday

This was my first purchase from Yuzu, and I am absolutely happy in every way possible!.
r/ErgoMechKeyboards • u/brad_thomas_scammer • 2d ago
[help] (Best) 36-38 keymap for mac?
Just got a 38 key keyboard and looking for advice on a keyboard layout.
I am aware of Miryoku, but I'm looking for something where I can access media layer and number layer using a single hand.
I also use the extra pinky key as a hyper button that activates a lot of shortcuts with just one hand
