r/FNSCAR • • 7h ago

Scar 15p 5.56 vent gas control screw size with suppressor

5 Upvotes

Hey everyone! I ordered a 5.56 15p that should be here this week and I plan on putting either an RC2 or maybe another suppressor I have on it. I'm wondering if anyone has any recommendations for the correct gas control screw size or sizes I should buy or if anyone has successfully run a KNS discarder or equivalent adjuster with the 15p. Thank you!


r/FNSCAR • • 4h ago

Question Getting ready to run suppressed

1 Upvotes

Hey everyone,

First off, this thread is truly amazing and super helpful.

I have a 17s and I’m just about ready to run suppressed. I just want to make sure I have everything ready before I do.

Here’s what I have so far

Can- HUXWRX Flow 7.62 TI

KNS Discarder

PMM/Surefire Shoulder Ring for the barrel

I believe that’s everything I need. Is there anything I’m missing or any suggestions from anyone? I just want the Scar to run super smooth once I put everything on and then I can fine tune it once everything is on.

Thanks again!


r/FNSCAR • • 4h ago

Has anyone tried the 15p 223w barrel?

1 Upvotes

Just curious as I keep seeing them on deadshot go in and out of stock, wanted to see if anyone on this sub had experience with it.


r/FNSCAR • • 1d ago

Fuck that warranty

Post image
130 Upvotes

r/FNSCAR • • 1d ago

8 point down

Thumbnail gallery
76 Upvotes

The new gen 2 17s with hux flow did not disappoint


r/FNSCAR • • 2d ago

Question Imperial Arms Co

Post image
96 Upvotes

Anyone know if they’re still operational? I found my payment refunded about a week after trying to purchase their UMP stock adapter. Hopefully they’re all good, hate to see these smaller innovative companies face hard times. I can make my own but I sure don’t want to


r/FNSCAR • • 1d ago

Question Cerekote Service Recommendation

1 Upvotes

Hi all. My local shop has a black SCAR 17s for a good price and I'm thinking of getting it and have it cerekoted to FDE. Wondering if any of you have any recommendation for shops that do this?Would love to hear about your experience. Thanks all! :)


r/FNSCAR • • 2d ago

FN no longer selling the SC stock?

4 Upvotes

I’ve been checking their site several times daily for a couple of months and just now their site states that it is no longer.


r/FNSCAR • • 2d ago

SCAR Picture 12”ish scar16

Thumbnail gallery
60 Upvotes

She thicc


r/FNSCAR • • 2d ago

Scar16

Thumbnail gallery
54 Upvotes

My chad build.


r/FNSCAR • • 3d ago

SCAR 15P Stock Options

Post image
58 Upvotes

I recently completed my SCAR 15P SBR build. It came out really nice and the CAT ODB makes subsonic 300 BLK sound like an overgassed pellet gun!

Originally I went with the good old fashioned SCAR Ugg boot stock. After MUCH searching I finally found a genuine SCAR SC stock and swapped it in.

The SC stock just drips cool! Seriously I get at least 2-3 people at the range who's jaws just drop when they see it. It's that sexy!

For as cool as it is though, I cannot argue that from a functionality standpoint, the Ugg Boot stock is just objectively better in every way when it comes to ergonomics, feel, and usability.

Hence my conundrum and where I was hoping to get your input. Keep the SC stock for max drip or sell it and just use the Ugg Boot?

Or keep both 😆 haven't ruled that out either.


r/FNSCAR • • 3d ago

15p on the 15th

Post image
44 Upvotes

Hope everyone is enjoying their Sunday! Finally got around to mounting and torquing everything down solid. Waiting on Lingle to make another batch of 15/16 lowers to install the pile of goodies I have set aside for that [if anyone has one laying around they arent using DM me].

Very happy with the setup as it currently sits.

Post your 15s!

Cheers all.


r/FNSCAR • • 2d ago

This MFer

Thumbnail gallery
12 Upvotes

Just picked up a 15p in .300 blackout. And I was really hoping this flash hider wasn’t as bad as everyone says. Well… I had to take it to a gunsmith and they even had a hard time. He had to machine it down to relieve pressure on the threads to break it free.


r/FNSCAR • • 3d ago

Barrel gas port size for 13" FN SCAR 17?

Post image
18 Upvotes

I've heard the stock gas jet size is 1.6mm.

Can anyone tell me what the stock barrel gas port size is?


r/FNSCAR • • 3d ago

SCAR Picture Ouuuuuuwweee

Post image
59 Upvotes

Just wanted to give you an update on the Scar 16s! I posted about the gas jet, and it’s all working now. What do you think about my current build? What changes would you suggest?


r/FNSCAR • • 4d ago

Been my main rifle since 2013.

Post image
92 Upvotes

r/FNSCAR • • 4d ago

SCAR Picture Messing around waiting for parts

Post image
23 Upvotes

Just picked up this 15P in .300. Ordered the Imperial Arms adapter for UMP stock (I have one laying around) and an Ugg boot since they’re in stock at Midwest Gun Works. I need to figure out which rail system would work well with a Sandman S since I have a couple. I have some LWRC BUIS on the way for it as well. I have a handful of different Surefire but I’m sure an m640 is what will live on this thing. I use Hogue’s 15° grip on all my AR’s so I’ll likely modify one for this as well.

All this crap on here is from my junk drawer although I think it’s a good home for the Comp M4S. Old with the new lol. I enjoy seeing all the different builds on here, hoping when this thing is finished it’ll be pretty rad. Thanks for having me 🍺

By chance does anyone remember the SCAR being in metal gear 4? I vaguely think that might be the first time I saw it.


r/FNSCAR • • 5d ago

Belgium Scar 16s With 18 inch Barrel 🤙🏽

Post image
67 Upvotes

r/FNSCAR • • 5d ago

Question Barrel Cover?

Post image
62 Upvotes

is there somthing I can buy to extend the handrail or cover the last little bit of the barell before the suppressor? I know chopping the barrel is an option but I figured Id see if there are more plug and play options before I get too crazy with it.


r/FNSCAR • • 5d ago

Deadshot 16S 6mm ARC Barrel

Thumbnail deadshotbarrels.com
6 Upvotes

EDIT: and BOLT

Has anyone seen this and/or ordered it? I'm extremely intrigued. I mean, just look at that beefy bolt. Seems like it'd solve a big issue 6ARC has.

I'm honestly wondering if I should grab a Gen1 16S to build a 6ARC instead of the LMT build I had been planning


r/FNSCAR • • 4d ago

Question Aftermarket pistol grips - wrist pain

2 Upvotes

After shooting my scar 16 and 17 for a few years I’m getting too much ulnar nerve impingement. It’s time for me to get new grips preferably with low to perpendicular angles; I don’t know where to start what do y’all recommend? Pictures are appreciated. Thanks in advance.


r/FNSCAR • • 4d ago

What’s the going rate on RCH SCAR 17? Only ever had 40 rounds through it has a Midwest industries rail and 6 mags

0 Upvotes

Fde


r/FNSCAR • • 5d ago

Decisions….Decisions

0 Upvotes

Leaning more towards the Velos, but….have the STM on a rifle and love it. Anyone else like the Velos?


r/FNSCAR • • 5d ago

SBR'd SCAR 17 owners: was it worth it?

Thumbnail gallery
8 Upvotes

r/FNSCAR • • 5d ago

SCAR Accessories and Parts Complete newbie question. Would a SCAR 16S/17S stock work on a scar 15P

4 Upvotes

Complete newbie question. Would a SCAR 16S/17S stock work on a scar 15P? If it will work is it an easy process to install?

Thanks!