r/FPGA • • 4h ago

FPGA

0 Upvotes

Hey everyone! I just did a course on FPGA and really enjoyed it, and I have some questions if anyone experienced would be able to help me with them

  1. I’ve just done an introductory course on it, I plan on taking some more advanced courses now but what can I work on independently to improve my skills in the field?
  2. In the course, we were taught using a Basys 3 board. To continue working on FPGA independently, what development boards would you recommend?
  3. With AI, it seems like a lot of jobs are becoming a bit redundant. FPGA doesn’t seem like one of them, but I do wonder how you all think it’ll be affected by AI

r/FPGA • • 10h ago

Advice / Help Arty Z7-20 vs Kria KR260 for RTL and hardware/software projects — add an STM32?

0 Upvotes

I’m looking for advice on building strong independent skills and a portfolio for entry-level ASIC/RTL design roles. My main interests are digital logic, RTL, and computer architecture, but I also want enough embedded knowledge to work comfortably with hardware/software interfaces.

I’ve used Verilog, Libero, and ModelSim during an FPGA internship, plus some ESP32, but I need to become more independent at designing, verifying, and debugging projects.

I’m interested in an FPGA SoC with a built-in processor so I can write my own RTL and learn memory-mapped interfaces, interrupts, and DMA. ChatGPT suggested the Digilent Arty Z7-20 and AMD Kria KR260, but I’d appreciate an independent opinion on whether either fits my goals. I’m open to other recommendations.

I’m also considering an STM32 board alongside the FPGA SoC. Would that add useful experience, or would it spread my attention too thin? My hardware budget is up to $1,000, but I’d prefer to spend less and avoid expensive software or IP licenses.

My main questions are:

• How should I prioritize SystemVerilog, verification, timing constraints, computer architecture, and embedded C?

• What projects would demonstrate useful engineering ability beyond following tutorials?

• What hardware would you buy for those projects, and what would you build first?

Please connect any board recommendation to concrete projects and mention relevant tool or licensing limitations.


r/FPGA • • 11h ago

Newer Rules. Twin iCE40UP5K board, GPU-free / RAM-free — design intent, not finished

Post image
0 Upvotes
  • Twin iCE40UP5K, RP2040
  • 25 MHz / 67750 = 369 Hz tick
  • Figure-8 toroidal 720°, tracks don't touch, pinch is node / docking
  • Not finished — 27 isolated labels, Sheet 2 not run, RP2040 not placed, no routing yet
  • Built in Gussstron City aka Cape Town, SA — no data center / GPU farm needed if you build like this

r/FPGA • • 7h ago

How hard is a (low-speed) USB Host to implement on FPGA fabric

7 Upvotes

I'd like to connect a PC game controller to my FPGA soft-core CPU. Which means I'm going to have to implement some level of USB host.

Looking around a bit - opinion seems divided as to whether this is something relatively straightforward, or a total nightmare and I'd be better off adding a discrete microcontroller just to do the interfacing.

So wondered if anyone has tried this - and how hard it was.


r/FPGA • • 20h ago

Meme Friday From the ProgrammerHumor community on Reddit: technicallyItCompiles

Thumbnail
reddit.com
8 Upvotes

I think this is more appropriate for FPGA tools!


r/FPGA • • 18h ago

Four years into FPGA engineering — what should I focus on next?

36 Upvotes

Hi everyone,

I’m about four years into my FPGA career and recently changed jobs and industries. I’d appreciate some perspectives from people who have been doing this longer, especially those with experience in semiconductor equipment, low-latency trading, or FPGA acceleration.

My background

I graduated in 2022 with a bachelor’s degree from a university in China that isn’t particularly well known. I spent roughly four years working as an FPGA engineer in the communications industry in Chengdu, earning a little over RMB 200k annually. I recently moved to a semiconductor equipment company in Shanghai, where my annual compensation is now close to RMB 400k.

The new role seems to offer a path toward system architecture, but I haven’t decided whether that’s the direction I want to pursue long term.

Most of my previous work involved high-speed data acquisition, buffering, and transport. I’ve worked with PCIe, 10GbE, DDR, optical links, SDI, Camera Link, SRIO, and high-speed ADCs/DACs. I’ve also built complete data paths from acquisition through buffering and transfer to reception on the host.

Once the overall system approach was agreed on, I generally handled the FPGA side independently: RTL development, simulation, timing closure, board bring-up, debugging, and system integration. I’m also comfortable with Linux setup, low-level C interfaces, and hardware/software integration.

My main gap is algorithm development. For communications algorithms, most of my experience has been integrating and debugging existing modules rather than designing the algorithms myself.

At this point, I can independently handle most of the types of projects I used to work on, and I’ve developed a reasonably systematic approach to debugging. But repeating similar projects is starting to feel like diminishing returns in terms of learning.

I have two main questions.

1. Where should I go deeper from here?

The options I’m considering are:

  • Staying close to FPGA implementation and developing deeper technical expertise.
  • Gradually moving toward system architecture.
  • Building domain expertise in semiconductor equipment: understanding the machines, their requirements, and how the electronics support the actual application.

I’m also curious about low-latency trading and inference acceleration, although my understanding of both is still fairly superficial.

If you work in either area, what does your day-to-day work actually involve? How much of my current experience would transfer, and what would be the biggest gaps to fill?

If you’ve made a similar move between industries, I’d particularly like to hear what turned out to matter more than you expected.

2. With AI tools improving so quickly, which skills are most worth investing in?

Recently, I’ve been experimenting with using AI to drive Vivado: writing RTL, running synthesis and implementation, inspecting reports, and automating parts of the debugging process.

For familiar, well-defined tasks, I can already delegate quite a few steps to it. Using it firsthand has made me rethink where I should spend my learning time.

Should I prioritize a deeper understanding of the underlying hardware, stronger system-level design skills, or a better understanding of the equipment and its applications? I know these overlap, but I’d like to hear how experienced engineers would prioritize them at my stage.

I’d also be interested in how you’re actually using AI in your workflow, where it still falls short, and whether it has changed your career decisions.

For those with five, ten, or more years of experience: if you were back at roughly four years into your career, with a background like mine, what would you focus on learning, and what kind of role would you look for next?

Firsthand experiences would be especially helpful, including paths you tried and decided weren’t for you. Feel free to point out gaps or blind spots in how I’m thinking about this.

Thanks!


r/FPGA • • 27m ago

Digital Clock on Tang Nano 9K

5 Upvotes

I made a digital clock with Tang Nano 9K. I'm currently in my 1st semester in Bachelors in Electrical engineering. Please rate this project.