r/FSAE • • 1h ago

Question Motor Shaft Load Analysis

Post image
4 Upvotes

Hey guys I am working on my first year team’s shaft meant to connect to Emrax 228 MV. I am working on identifying load cases on the motor shaft to find a factor of safety. I have some initial calculations but I am not sure about the reaction forces at the motor connection and the boundary conditions. The Shaft is bolted to the rotor so does that mean I should model that connection as a pin or fixed one. This is also to find the load on the bearing for sizing purposes. In extension I also want to identify the load cases for the motor mounts . Also we are looking to but motorcycle sprocket, have you guys had issues with making the spline the shaft?


r/FSAE • • 9h ago

3DSusp Web: Beta 2.0 is out!

Thumbnail
gallery
15 Upvotes

3DSusp Web keeps evolving! The latest updates introduce powerful new features, enhanced modelling capabilities and greater flexibility throughout the suspension design and analysis workflow.

Here’s a quick preview of the new features:

  • Custom reference frames and selectable measurement units
  • New tyre & wheel editor
  • STEP geometry import in the wheel reference frame, with clash detection (useful for electric in-wheel motor)
  • New Clash Mode for detecting component interference
  • Coil-to-coil contact detection for main and heave springs
  • Enhanced reporting tools
  • Customisable output selection, with configurations that can be saved and reused

And much, much more!

Access is free for FSAE/Formula Student teams. Simply register using your team's official e-mail address to start using the platform:

https://www.bspokeautomotive.it/3DSuspWebBeta/

We hope 3DSusp Web will become a valuable tool for your suspension development.

The development team.


r/FSAE • • 5h ago

Alternatives to Unitek Bamocar D3 700/400 or experiences with custom inverter design for EV?

3 Upvotes

Hi everyone,

Our team is currently using the Unitek Bamocar D3 700/400 inverter for our electric formula vehicle. We are looking into potential upgrade or replacement options that are reliable and widely used in student competitions.

  1. Are there any recommended commercial alternatives (such as Cascadia Motion PM100DZ or others) that offer good integration and support?
  2. For teams that have designed and built your own inverters from scratch, could you share some insights on your hardware architecture (e.g., SiC MOSFET selection, busbar layout, and control board setup)?

Any advice or shared experiences would be greatly appreciated. Thanks!


r/FSAE • • 14h ago

How do you set torsional and bending stiffness targets for an FSAE spaceframe chassis?

8 Upvotes

Hi everyone,

Our Formula Student team is in its 2nd year, and we're building a tube spaceframe chassis. We're starting our chassis FEA and I'd like your advice on target setting.

Context:

- In our first year, we collected stiffness targets from other teams and used them as reference (the average) as our own.

- The judges told us to define our own proper, well-justified targets.

Question:

How do you set your torsional and bending stiffness targets? What do you base them on?

Thanks a lot for any help or resources!


r/FSAE • • 12h ago

Question First-year FSAE team – looking for feedback on our chassis design

Thumbnail
gallery
5 Upvotes

Hi everyone!

We're a first-year Formula Student team preparing for FS UK, and this is our first spaceframe chassis concept.

We'd really appreciate some feedback from experienced teams:

  • Any obvious issues with our triangulation or tube layout?
  • What would you improve in the overall design?
  • Any advice before we move on to detailed design and manufacturing?

We're still learning, so any criticism or recommendations are welcome!

Thanks!


r/FSAE • • 3h ago

hi guys, need some help in starccm

1 Upvotes

so as part of my grad project I am supposed to validate Ahmadbody and perform a mesh dependence study for it so that I can use those sizings on my uni's Formula Student team's car. anyway, when i only activate surface mesher for the Ahmadbody the quality is fairly good (about 0.25 on average), however, when i activate prism layer meshing, the quality drops to E-5 or some stupid number like that. any idea why the quality drops so bad?


r/FSAE • • 5h ago

Chassis Manucturing using ERW tubes

1 Upvotes

Hi guys, we are planning to participate in Formula student UK this year and now we are searching about suitable steel grade for our chassis.

In my country, Seamless tubes are difficult to source and what we find is the ASTM A106 grade B. Which is the highest yield strength material we could find( for seamless tubes)

Another option we have is to use ERW tubes with minimum yield strength material of 235 MPA.

So my questions are if we use the ERW tubes without doing any physical testing to prove equivalence, will we pass scrutineering?

And in the calculation in SES can we use the numbers specified in the rules for calculating ( minim yield strength= 305MPA) or should we stick with the 235 MPA


r/FSAE • • 11h ago

How to change ramp angles on a Drexler V2 LSD?

1 Upvotes

Hello everyone,

We currently have a Drexler V2 LSD on our team, and we want to adjust the ramp angles for our setup, but we're not exactly sure how to do it. Is there a manual on how to adjust them?


r/FSAE • • 2d ago

Competition FSG to no longer use a quiz for registration

Post image
189 Upvotes

r/FSAE • • 1d ago

Question When do individual team members need to sign up (UK)

0 Upvotes

Hi I am apart of a new team that is doing concept class. I manage the recruitment and handling of all applications for my team.

I am aware that all team members must be an IMechE member. They must also all individually sign up. However I do not know the deadline for when all team members must sign up.

I need to know this information as soon as possible because we are ending recruitment this Friday and I’m sending every email to new members instructing on what they must do. I want to include deadlines.

I have look for hours but cannot find nothing but the ai response on google (which isn’t always accurate).

Any help will be much appreciated


r/FSAE • • 1d ago

Question Tab washers

Post image
14 Upvotes

Does anyone know if these are legal for positive locking and if so, have insight on their use?


r/FSAE • • 1d ago

Taylor Race 20T tripod and axles

1 Upvotes

Hello everyone, anyone has some data on the maximum torque allowed by the TRE tripod and axle? Thanks


r/FSAE • • 2d ago

Formula Student headrest – how do you attach the foam and cover to the mounting plate?

0 Upvotes

Hi everyone!

I'm working on the headrest design for our Formula Student car, and I'd like to know how other teams manufacture and assemble theirs.

Our current design has a metal backing plate attached to the chassis. We are looking for a reliable way to attach the foam padding to this plate.

I've seen different approaches used by other teams, such as:

  • Using hook-and-loop (Velcro) to attach the padded assembly to the metal plate.
  • Using adhesive or other mechanical fasteners.

I'd really appreciate it if you could share how your team does it.

A few questions in particular:

  • Do you attach the foam directly to the metal plate, or do you use a separate backing?
  • How do you secure the whole assembly to the mounting plate?
  • Have you had any issues with Velcro, adhesives or mechanical fasteners during technical inspection or testing?

Pictures of your setups would be especially helpful!

Thanks in advance!


r/FSAE • • 2d ago

How To / Instructional 1st Year team need advice

4 Upvotes

Hi everyone,

We are a brand-new, first-year Combustion Vehicle team preparing for Formula SAE Italy 2027 (still deciding between entering Class 1 + Class 3 or starting with Class 3 only).

Right now, we are struggling to establish a clear, structured engineering workflow. We’ve read through the rules and searched past threads, but we are still unsure about the exact sequence of early design decisions.

Any advice on a realistic first-year roadmap, common pitfalls to avoid, or recommended foundational resources would be hugely appreciated.

Additionally, we’ve heard that some alumni and experienced members occasionally mentor newer teams. If anyone is open to offering occasional guidance or reviewing our early progress, we would be honored to connect.

Thank you all in advance!


r/FSAE • • 3d ago

Competition FSCzech Going Full Electric thoughts?

Post image
60 Upvotes

What do you think about the way they presented this information and especially about their feedback in the comments?

In my opinion it is quite unacceptable to respond with memes and not reasons and real answers.

I understand that more teams want to compete with electric vehicles than with combustion ones, and that the spirit of Formula Student is about development, innovation and following global technological trends. Still, I believe the combustion engine continues to play a role in modern machinery, and CV teams deserve a place in the competition.

https://fsczech.cz/registered-teams-2026/

This decision is particularly hard on the Czech CV teams. There may be only three of them, but FSCzech is their home competition, where they can present their work to their sponsors. At the very least, the change should have been announced before they began developing their new cars.

What are your opinions on that? And seriously check out that comment section (imo its a bit of a PR disaster)


r/FSAE • • 4d ago

3 element torsion bar pushrod front suspension

171 Upvotes

I know that torsion bar suspensions are not very common in fsae because of cost and complexity but i figured that you still might find this interesting.

The suspension in the video is very simmilar to what f1 cars in the late 90s to early 2000s, lmp cars and modern LMH/lMDh cars use/used. Modern f1 cars use a different layout with rockers that are angled upward and the torsion bar not being mounted to the front bulkhead.

The suspension in the video is from a project car i am working on for my highschool graduation.

I used the CAD platform Onshape to create and animate the suspension and the rest of the car.


r/FSAE • • 3d ago

Electrical T.9.2.6 Rules Clarification

3 Upvotes

We are switching to a 12v lithium-ion battery this year to reduce weight and improve reliability. I was reading the rules for it and I was wondering if I could get clarification from teams who currently run lithium-ion batteries for rule T.9.2.6.

We plan on running Antigravity ATZ10 RE-START Lithium-Ion Battery. https://www.partsgiant.com/p393215-antigravity-re-start-lithium-ion-battery?m=17329044&msclkid=ca165ee325b31c6a6a22341a00b95447

We submitted a rules request for this among other questions over a month ago and we haven't gotten a response yet. Any help is appreciated.


r/FSAE • • 3d ago

YFZ450r Ball Park IGN Advance

5 Upvotes

Alum trying to get the 2018 Iowa State car going again. Runs a YFZ450R, E85 Should be 14:1 compression but i dont know the full build of this engine (was the dyno/test mule).

Anyone have a stock ignition curve for this engine or a ballpark ign advance?

Current tables i have from the team have about 40deg all in at 12k rpm, at full load and partial throttle (says to me either there's too little advance at part throttle or too much at WOT). Would think the chamber design on these is pretty efficient with a fast burn so 30deg+ over the power band does seem like a lot. My only tuning reference is a small block ford that turns a fraction of the RPM but has a max advance of 29deg at WOT.


r/FSAE • • 4d ago

I have an interview with a team

7 Upvotes

Since I started engineering I’ve always wanted to join a FSAE team since I love Motorsport. I’m applying to the EV powertrain department.

The interview will have some technical questions, if any powertrain engineers could give me some tips in which technical aspects should I focus on my study it would be an amazing help !!!!


r/FSAE • • 4d ago

Career in motorsports!

Thumbnail reddit.com
1 Upvotes

OKAY GUYS

Im getting the opportunity to choose the mechatronics and robotics society of my school.

Should i take it, will it help me in the future for motorsports or aero?


r/FSAE • • 4d ago

Making a budget 1-1 scale driverless racecar

Thumbnail
tyrovouzis.dev
5 Upvotes

r/FSAE • • 5d ago

Marketing Something a little different for this year's UC Motorsport reveal!

76 Upvotes

hey there, thought I'd share our UCM26 reveal trailer from UC Motorsport here in New Zealand!

we wanted to do something a little different for this year's car reveal, taking a more cinematic approach with red particles, lighting and glimpses of the car's geometry gradually building up to the reveal.

following our overall win at FSAE-A in 2025, we've been putting a huge amount of work into UCM26, both on the engineering side and how we present the car.

pretty happy with how the trailer turned out, thought you guys might appreciate it!


r/FSAE • • 4d ago

Off Topic / Meta Exporting My Godot Vehicle Simulator as a Plugin

Post image
5 Upvotes

Hello everyone! I recently officially released my project as a plugin this week. So, I made a little video to spread the word. This is a major milestone for the project so try and keep up!

Video: https://youtube.com/shorts/pDHGp1ocZVY?feature=share

Drop a star on Github, it supports the project a lot!

Project: github.com/kakoiihito/Shift