r/Fireplaces • • Nov 06 '22

If you’re posting a question about your fireplace, please include pictures and/or model numbers.

26 Upvotes

Pictures are very helpful for users to give accurate advice and information. Fireplace specifics aren’t common knowledge to most people and it’s very typical for people to use incorrect terminology regarding what they have. If you don’t know the difference between gas logs, a gas insert, and a gas fireplace, you really should post a picture to make sure you’re given good advice about what you can do with your fireplace.


r/Fireplaces • • 3h ago

90 yo fireplace. What am i looking at? Is it usable?

Thumbnail
gallery
4 Upvotes

We’d like to get this working, but we’ve never had a fireplace before. Is this a diy or are we screwed?


r/Fireplaces • • 1h ago

Tis the season - Supreme Astra 32

Post image
2 Upvotes

Just wanted to share my setup.

Supreme Astra 32 Traditional high efficiency fireplace. Added an extra inline fan to dump heat into the basement. Heats our 1900sqft bungalow very nicely.


r/Fireplaces • • 7h ago

Got to love an old stove, doing what it does best 🔥

Thumbnail gallery
3 Upvotes

This little beast keeping my mini-rustic cabin nice & warm.


r/Fireplaces • • 7h ago

Ventless Gas Fireplace - what can I do to keep my house warm without making the house smell like gas?

Post image
0 Upvotes

As the title says, my house has a ventless gas fireplace. I like using it and it does produce heat, but it makes the house smell faintly of gas. If I were to run it for an hour it would be enough of a smell that I get a headache. ChatGPT says that is normal and that there really isn't much I can do about it other than open a window or door (which obviously would not be practical, since the reason the fireplace is on is to warm the house).

Anyone have any suggestions? Is the smell normal or is something potentially wrong? If this is how it's supposed to work, is there something I can do to still run the fire and not knock my family unconscious?


r/Fireplaces • • 13h ago

Enviro Westport burner crack

Thumbnail
gallery
0 Upvotes

Recently bought this house and I decided to perform maintenance on my Enviro Westport Steel when I noticed a crack in the burner. Maybe 3" long.

I plan to call dealers in my area tomorrow, but I might need to order the part online. This is my main source of heat. Can I run this until the part comes?


r/Fireplaces • • 14h ago

What color should the flame be on my (probably) old caravan butane gas fire?

1 Upvotes

It flickers constantly between yellow/orange and occasionally blueish. If I have it really low, it's only yellowish. I've been told that's normal and means everything is fine. But im not so sure. Can anyone confirm or deny this please. Ty


r/Fireplaces • • 16h ago

Is this loud, wind-like noise from my gas fireplace pilot light normal? (Video)

1 Upvotes

I just moved into a rental apartment in Michigan, and I’m unfamiliar with this type of gas fireplace.
The fireplace has a standing pilot light that stays on even when the main burner is off.
The pilot makes a continuous, fairly loud, low-pitched whooshing sound, almost like wind blowing or a small gas torch. I can even hear it from the next room.
The flame appears blue, and I haven’t noticed any gas smell. There’s also a smoke/CO detector installed in the apartment.
The fireplace itself is a Superior RD 3800, although I’m not sure about the model of the gas log burner.
Is this level of noise typical for an older standing pilot, or does it suggest something needs servicing?
I’ve attached a video showing the flame and the noise.
I plan to have maintenance inspect it, but I’d appreciate your thoughts.

Edit: Just to put the noise level into perspective, the apartment is extremely quiet, with virtually no background noise. That might make the pilot sound louder than it actually is. When the refrigerator compressor kicked in, it was noticeably louder than the fireplace pilot. So the noise is definitely audible, but perhaps not as loud as my original description suggests.


r/Fireplaces • • 22h ago

Question regarding liner vs. insert

2 Upvotes

I have plenty of wood stove experience from living in Vermont for 12 years, but I just moved into a 1957 home with a fireplace. We had it inspected and were told it cannot do a liner, but were quoted over $12k for an insert system. It's nice and I get it, but here in North Carolina we do not need the super efficient system, we just want to have a fire once in a while. Were we just upsold to what he makes money on vs. a cheaper job or is this really the case with a home this age? Can't really justify or afford the 12k for an aesthetic/power out heat at this time. I was expecting closer to 6k maybe. The 12k did not even include the electrical work for the fans. I'm a bit overwhelmed as we were excited to have a fireplace. Thanks.


r/Fireplaces • • 20h ago

Wood insert question

Thumbnail
gallery
1 Upvotes

I want to install a wood insert into my existing fireplace and I want to install zellige tile around the face. The tile is about 1inch thick and is not super uniform. Should I install the tile up to the opening and then install the insert or should I install the insert and then tile up to the face frame?

If the tile becomes to much of a pain, I am considering doing a lime plaster finish so the face is relatively smooth instead.

If anyone has better suggestions please let me know.

The climate I live in only would allow for a fire several times a year and I have central heat, so I would prioritize the appearance over function.


r/Fireplaces • • 20h ago

Helping my ol' man

Thumbnail
gallery
1 Upvotes

I'm a contractor yet I've come down to my father's house in GA and cannot figure this three side gas glass fireplace out. There isn't a valve in the basement and it is wall switch operated. Does anyone know how to light the pilot?


r/Fireplaces • • 1d ago

Should i get this or is a more modern stove better?

Thumbnail gallery
3 Upvotes

r/Fireplaces • • 22h ago

fitting pipe to a vintage montgomery ward stove

Thumbnail gallery
1 Upvotes

I restored an old Montgomery Ward stove, and installed a pipe and chimney through the metal room on a shed I'm using as a little cabin in my woods.

I'm trying to fit the pipe to the oval ring on the casting. I connected a single-wall pipe on the outside of the ring for the outdoors burn I did to set the high-temp paint - can I just do that and tie into the double wall interior pipe I have? I also have an adapter piece that has one end that's the same shape, but no obvious way of connecting them.

Any advice would be much appreciated.


r/Fireplaces • • 22h ago

DIY mortar replacement?

Thumbnail
imgur.com
1 Upvotes

r/Fireplaces • • 22h ago

Recently discovered fireplace isn't just decorative, looking for advice

Thumbnail
gallery
1 Upvotes

UK Victorian terrace

Moved about 18 months ago and always thought the fireplace was decorative so put candles in it.

I've recently discovered that the upper portion is actually a flap and it does open to the chimney. I thought it was just a pretty way to block up a fireplace

When I had the roof repaired the roofer mentioned that the chimney isn't blocked if I ever wanted to use it.

I know I need to get the chimney swept but I'm pretty inexperienced with this

- it seems quite shallow, and I'm not sure I'd get a lot of material in there?

- the bottom looks like ash will just fall through it. Am I missing a part or do I just keep a metal baking tray under there and empty it now and then?

- from my research I assume it is designed for coal. Can I burn modern smokeless fuel that is shaped like coal?

- I'm a bit concerned with the shape of it you can't heap coal very high without it falling out?

- does it look okay to use?

-is it safe to go to bed if there are hot coals? I get home at 5pm but go to sleep at 9pm so it seems a short window to get a good fire going and let it burn out

Thanks


r/Fireplaces • • 23h ago

Is this stage 3 creosote?

Thumbnail
gallery
1 Upvotes

A chimney sweep told me they'd be unable to perform a regular sweep due to stage 3 glazed creosote in the smoke chamber. They quoted me $1,800 for a PCR chemical treatment and noted "additional applications may be needed." We rarely use our fireplace, maybe 4 or 5 times a year, but our last sweep was 7 years ago. We got a rick of wood last year that was definitely unseasoned, so could be the issue, but I'm shocked it's gotten bad enough for this. Thought I'd get some second opinions on Reddit. Thanks!


r/Fireplaces • • 1d ago

Can a cast iron fireplace clean out door work safely as a fireback?

Post image
0 Upvotes

Like this. Never had a fireback.


r/Fireplaces • • 1d ago

Blown bricks fireplace

Thumbnail gallery
2 Upvotes

r/Fireplaces • • 1d ago

Can anyone tell me about this wood burning heater?

Post image
1 Upvotes

A friend of mine just bought a house with this kind of stove. The previous owner used it and said the chimney was recently swept, but before my friend does anything she will obviously have it inspected. We have heard it called a Russian stove. It is some kind of masonry heater but that’s about all we know.

Can anyone offer advice on using it?


r/Fireplaces • • 1d ago

Caping off chimney

1 Upvotes

Hey everyone, here is my dilemma. I just moved into a new home. The house has a ventless propane system in the fireplace that is working well. I believe this was installed and converted from a wood burning fireplace after the damper for the flue rusted shut. I plan on keeping it as a propane fireplace, since I have propane for other things around the house.

The chase cover and spark arrestor at the top of the chimney are rusted and started to let a small amount of water in. I had a chimney guy come by and he suggested that if I wasn't going to use it as a wood burning fireplace in the future, we could cap off the top of the chimney with an aluminum cap and put on a wind band for aesthetic purposes.

Does this sound like a good idea? Part of me is worried about potentially trapping moisture in the chimney that can't escape. I also don't love the idea of having to replace the whole firebox to have a working damper for a ventless system.


r/Fireplaces • • 1d ago

First new use of the year

Post image
1 Upvotes

r/Fireplaces • • 1d ago

What sort of efficiency could I expect from installing an insert in a heatilator?

Post image
8 Upvotes

I redid our fireplace a few years ago, stripping off layers of paint, new mantle, new doors etc. I’m happy with how it turned out aesthetically but now wishing I had installed an insert. I did not do it initially because I thought it was a waste of a heatilator. I imagine you effectively remove any advantage the air chamber gives you with an insert. I did install small fans at the bottom air inlets to push more air through the air chamber. I burn mostly ash and oak. Some red maple and poplar. With all that considered, what sort of efficiency could I expect from an insert installed in a heatilator fireplace?


r/Fireplaces • • 1d ago

Smokey House Everytime

2 Upvotes

I moved into my home a couple of years ago and have been having problems getting a good fire ever since.

  • Got the chimney cleaned before I ever lit a fire so that's not the issue.
  • I have split, dried wood. If I use a lot of kindling, the fire will burn really well for a while and then it always starts to get smokey as the fire is dying down.
  • Before I start the fire, I burn a rolled up newspaper and stick it at the base of the chimney to pre-heat it. I also always crack a window on the opposite side of the room for airflow.
  • The opening to the fireplace is 34" x 30" with no door. I wonder if this is part of the issue? Considering getting a door but I like the look of the doorless fireplace.

Any thoughts on what could solve this? Thanks all.


r/Fireplaces • • 2d ago

Is this a gas or wood burning fireplace?

Post image
4 Upvotes

We moved into a new house, and are trying to figure out if this fireplace burns wood or gas. The label says wood fuel only, but the logs placed in it are the artificial kind, and there is a gas key on the wall by the fireplace. Has this fireplace been converted? How do we tell?